Stihl 1121 · Section E · 5 of 17 · 27 parts
Chain brake
Fits 026.
Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.
Parts (27)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1121 792 9101 | Hand guard | 1 |
| 2 | 1121 160 5000 | Lever → replaced by 1128 160 5000 TI 8/1994 | 1 |
| 3 | 1121 162 5010 | Lever | 1 |
| 4 | 0000 997 0628 | Spring | 1 |
| 5 | 9460 624 0400 | E-clip 4 | 2 |
| 6 | 1121 160 5400 | Brake band | 1 |
| 7 | 1121 160 5501 | Tension spring Fitment / change note → | 1 |
| 8 | 1121 162 8000 | Hose 12x1x20 mm Fitment / change note → | 1 |
| 9 | 1121 021 1102 | Cover Fitment / change note → | 1 |
| 10 | 9022 313 0660 | Spline screw IS-M4x12 | 2 |
| 11 | 0000 790 6100 | Screw assy. M4 | 1 |
| 12 | 1125 007 1021 | Spur gear / chain adjusting screw kit | 1 |
| 13 | 9646 945 0490 | O-ring 7x1.5 | 1 |
| 14 | 1125 640 1900 | Tensioner slide | 1 |
| 15 | 1125 664 1400 | Thrust pad | 1 |
| 16 | 1122 664 2200 | Cover plate | 1 |
| 17 | 9041 216 0630 | Pan head screw M4x8 Fitment / change note → | 2 |
| 18 | 1122 664 1000 | Inner side plate 0.5 mm Fitment / change note → | 1 |
| 19 | 1122 664 1001 NLA | Inner side plate Fitment / change note → option | 1 |
| 20 | 1125 640 1701 | Chain sprocket cover Fitment / change note → → replaced by 1122 640 1702, 1128 640 1706 TI 36/2000 | 1 |
| 21 | 1121 648 6610 | Bumper strip | 2 |
| 22 | 1125 656 1501 | Guard | 1 |
| 23 | 0000 955 0801 | Hexagon nut M8 | 2 |
| 24 | 1125 656 1500 | Guard | 1 |
| 25 | 1125 656 1505 | Guard | 1 |
| 26 | 9099 021 1760 | Self-tapping screw 2.9x9.5 | 1 |
| 27 | 0000 967 3630 | Instruction label | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · 024 / 026 / 034 / 036
024 / 026 / 034 / 036: sprung side plate requires the revised cover
Side plate 1122 664 1000 changes to 1122 664 1001; new plate installation requires the matching new cover. The general cover row changes 1125 640 1700 to 1125 640 1701.
- When fitting the revised sprung-tab side plate during a repair, the new-version chain sprocket cover must also be fitted. The tabs hold the guide bar during chain assembly; this is not approval to use the new plate with the original cover.
- Original side plates remain available for original covers/older machines in this bulletin. Original covers are supplied only while existing stocks last; these are historical availability statements.
- The source identifies new covers by integrally cast numbers 1122 648 0401 and 1125 648 0404. These are identification marks, not the 640-group cover ordering numbers or established ordering aliases. The prose does not explicitly pair each cast number to a summary row.
- The illustrated installation removes the M4x8 pan-head screw and old plate, pushes the new plate over the bar studs, then seats it using a combination wrench and one short blow with a plastic mallet.
- For the FIRST installation of a new side plate, the source says to mount the guide bar and cover and tighten the M8 nuts to about 15–20 Nm (11–15 lbf.ft). This historical seating step is not a universal torque specification for later models or normal recurring bar adjustment.
- Illustrated removal fits an M8 nut to the rear bar stud, twists the combination-wrench screwdriver end about 45° counterclockwise under the plate, raises the wrench end about 10–15 mm (1/2 in), then removes the nut and plate. Preserve the illustrated orientation; no hardware operation is verified here.
- Pan-head screw 9041 216 0630 is omitted in the revised arrangement, not globally discontinued: the summary says it remains a spare for other models.
- Introduction is in progress, dated May 17, 1994, without a numeric serial cutoff. The seven explicitly named models do not establish applicability to successors, 046, or unlisted variants. Prior-TI references are bibliography, not inherited compatibility.
Source: TI 12/1994, p. 1 · TI 12/1994, p. 2 · TI 12/1994, p. 3 · TI 12/1994, p. 4 — Cover/side-plate service note, assembly/disassembly and model-qualified summary.
Part numbers (7)
- 1122 664 1000 — Original side platePrevious version · Retained for original cover
- 1122 664 1001 — Sprung-tab side plateNew version · Requires new-version cover
- 1125 640 1700 — Chain sprocket coverPrevious general cover · Historical while-stocks-last availability
- 1125 640 1701 — Chain sprocket coverNew general cover · Named models in general summary row
- 9041 216 0630 — Pan-head screw M4x8Removed from new arrangement · Still a spare for other models
- 1122 648 0401 — Integrally cast cover numberIdentification only · Not an ordering alias or explicit row mapping
- 1125 648 0404 — Integrally cast cover numberIdentification only · Not an ordering alias or explicit row mapping
Historical fitment · 024 / 026
024 / 026: stronger brake spring keeps the same number
The higher-strength brake spring remains 1121 160 5500; the number alone does not identify its strength revision.
X 31 103 922 — Higher-strength brake spring introduced; not the filter or decompression changeover.
- Section 3 is the unqualified chain-brake section under the 024/026 bulletin header; sections 1 and 2 explicitly limit their changes to 026. The spring change is retained for 024 and 026, not inherited by successor models.
- Original and new columns both print 1121 160 5500. Only the modified version is available from the factory according to this 1995 bulletin. No new spring dimension or strength value is given.
- The catalog sheets list 1121 160 5501. This TI does not establish 5500 → 5501 equivalence or supersession. Keep the historical number distinct and do not invent a drawing row.
- The brake-spring serial X 31 103 922 is separate from both filter-system retrofit X 30 976 775 and filter/decompression production X 32 252 039. The source supplies no global early/late model classifier.
Source: TI 31/1995, p. 1 · TI 31/1995, p. 6 — Bulletin scope and section 3: complete brake-spring note and summary.
Part numbers (1)
- 1121 160 5500 — Brake springSame number; higher-strength revision · 024 / 026 per section 3; not an alias of catalog 5501
Conditional replacement · 024 / 026 / 026 C
024 / 026: guide-ledge cover 1121 021 1102 replaces 1101
The small cover with a molded guide ledge is the universal 024/026 replacement, not the complete quick-tensioner sprocket cover.
- The integrally molded guide ledge (arrow in 133TI036 KN) eases assembly of the chain sprocket cover. Page3 item4 identifies this small cover as 1121 021 1102; remark3 permits it as a universal replacement for all model 024 and 026 saws in place of 1121 021 1101.
- Do not transfer this compatibility claim to item9 chain sprocket cover 1121 640 1700, to the special crankcase or to the whole quick chain tensioner. The modified-crankcase retrofit requirement still applies. The reverse 1101-for-1102 direction is not established.
- Historical all-024/026 wording is preserved; successor-model applicability is not inferred from shared series1121. The retained2012 026 quick-tensioner sheet provides a matching1102 row; the earlier1101 is retained as source evidence rather than silently deleted.
- Historical TI 39/1998, series 1121: small-cover compatibility only. No serial threshold, reverse interchange, MS 240/MS 260 successor applicability or current supply is established. No hardware operation was performed.
Source: TI 39/1998, p. 2 · TI 39/1998, p. 3 — Section2 cover/arrow; page3 item4 and remark3.
Part numbers (2)
- 1121 021 1101 — Previous small coverPrevious part · 024 / 026; replaced by1102 under remark3
- 1121 021 1102 — Cover with integrally molded guide ledgeReplacement · All model024 and026 saws, per historical remark3
Conditional replacement · 024 / 026
024 / 026: brake-spring hose changes at the US-production boundary
From 2 41 809 371 (US production), brake spring 1121 160 5501 includes the thinner black hose 1121 162 8000 instead of the transparent hose.
2 41 809 371 — From this serial for US production only; brake spring/hose change, not a global model range or tool-kit boundary.
- Section 3 and figure 133TI043 KN change brake spring with hose 1121 160 5500 to 1121 160 5501. The included hose changes from transparent 1125 162 8001,12x1.5x20 mm, to black 1121 162 8000,12x1x20 mm. The prose identifies wall thickness 1.5 mm versus 1 mm. The illustration and text do not establish a changed bare-spring rate or a standalone bare-spring order number.
- The printed introduction is from serial 2 41 809 371 (US production). Retain the US-production qualifier and full printed prefix; this is not a global 024/026 boundary, not the tool-kit prefix1 condition and not an instruction to combine arbitrary old/new spring-and-hose components.
- Summary remark 1 applies separately to old spring assembly 5500 and old transparent hose 8001: both remain available for other models. Other models are not named, so that remark creates no new fitment rows and is not permission to install the old combination on a post-change 024/026.
- The exact 024 clutch/chain-sprocket sheet lists new spring and hose at 21/22; the exact 026 chain-brake sheet lists them at 7/8. These binding locations preserve original IPL labels and do not add a brake repair or adjustment procedure.
- TI12/1999 historical guidance for the explicitly named 024/026 configurations only. No MS successor or general part-number-prefix compatibility is inferred. Factory supply statements are historical, not current availability. No physical interchange, oil-delivery measurement or brake test was performed.
Source: TI 12/1999, p. 1 · TI 12/1999, p. 2 · TI 12/1999, p. 3 — All three original USA pages: contents, sections1–4, four figures, all summaries, remarks and serial conditions.
Part numbers (4)
- 1121 160 5500 — Previous brake spring including transparent hoseOld assembly; retained for unnamed other models · 024 and 026 before the stated change; TI12/1999 section-specific conditions apply
- 1121 160 5501 — New brake spring including black hoseNew assembly from stated US-production boundary · 024 and 026; US-production boundary applies; TI12/1999 section-specific conditions apply
- 1125 162 8001 — Previous transparent hose 12x1.5x20 mmIncluded in old spring; retained for unnamed other models · 024 and 026 before the stated change; TI12/1999 section-specific conditions apply
- 1121 162 8000 — New black hose 12x1x20 mmIncluded in new spring;1 mm wall thickness · 024 and 026; US-production boundary applies; TI12/1999 section-specific conditions apply
Wrong number or missing part for the 026? Report a correction →