← 064/066 · MS 660 · MS 650/640

Stihl 1122 · Section J · 9 of 17 · 27 parts

Rewind starter

Fits 066.

Parts diagrams →

Historical fitment & changes (5) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202122232434567789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (27)

PosPart numberDescriptionQty
1 1122 080 1816 NLA Fan housing Fitment / change note → 1
2 1122 084 6502 Axle Fitment / change note → 1
3 1110 084 9102 Bushing 1
4 0000 958 0607 Washer 1
5 9416 868 6530 Hollow rivet 6.5x0.5x6.8 1
6 1122 084 7809 Segment Fitment / change note → 1
7 9022 341 0650 Spline screw IS-M4x10 Fitment / change note → 4
8 1122 190 0605 Rewind spring Fitment / change note → 1
9 1122 084 7808 Segment Fitment / change note → 1
10 9022 313 0660 Spline screw IS-M4x12 Fitment / change note → 2
11 1129 190 0600 Rewind spring Fitment / change note → 1
12 1122 195 0400 Rope rotor 1
13 1119 162 8925 Washer Ø 12 mm 1
14 1124 195 7200 Pawl 2
15 1124 195 3500 Spring 1
16 1122 190 3400 Starter grip ElastoStart Ø 4,5 mm 1
17 1122 190 2900 Starter rope Ø 4.5 mm 1
18 1122 080 2102 Fan housing with rewind starter 1
19 1121 195 3400 Starter grip 1
20 1107 195 8200 Starter rope Ø 4.5x1000 mm 1
21 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 3
22 1122 084 8207 Cover plate Fitment / change note → option 1
23 9022 341 0650 Spline screw IS-M4x10 Fitment / change note → option 2
24 0000 967 2035 Nameplate STIHL 1
Not numbered on the diagram — assemblies, kits and options
— 1122 080 2110 NLA Fan housing with rewind starter Fitment / change note → 1
— 0000 930 2268 Starter rope Ø 4.5mm / 28 pieces option 1
— 0000 930 2200 NLA Starter rope Ø 4.5 mm x 30.5 m not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · 066

066 winter shutter: return to summer near +20°C

New cover 1122 140 1002 has a summer/winter shutter. Return it to summer when outside temperatures rise to about+20°C (68°F) to avoid running problems and overheating.

X 39 176 186 — TI01/1998 summary introduction of the described 066 modification; not a universal whole-saw interchange boundary.

  • The new cover draws heated air from around the cylinder in winter position to reduce carburetor icing. Drawing 1 is summer and 2 is winter; the +20°C threshold is the printed approximate return-to-summer instruction, not a new cold-weather switch threshold.
  • Cover 1122 140 1001 changes to 1122 140 1002 and includes unchanged twist lock 1124 140 9500 plus new shutter 1122 141 4000. The original cover remains available as a spare (remark 1).
  • The winter-operation special-accessory cover plate 1122 084 8206 changes to 1122 084 8207; the drawing shows the plate on the fan housing. It is distinct from the filter-cover shutter and shroud rotary shutter.
  • Original preheating kit 1122 007 1027 includes twist lock item 12 and carburetor-box cover 1122 140 1901 (item 38); that cover includes plate item 39, cover 1122 141 2500 and blind rivet 9438 929 4040. The kit, box cover, small cover and rivet have dashes in the new column. All these original parts, including the original plate, remain spares under remark 1. No unprinted new complete preheating kit is inferred.

Source: TI 1/1998, p. 3 · TI 1/1998, p. 4 · TI 1/1998, p. 5 · TI 1/1998, p. 6 — Section2.5; section5 cover plate; summary items11–13,37–41.

Part numbers (10)
  • 1122 140 1001 — Filter coverOriginal version / historical spare status · 066; exact 1998 configuration and conditions apply
  • 1122 140 1002 — Filter coverNew version · 066; exact 1998 configuration and conditions apply
  • 1124 140 9500 — Twist lockUnchanged number · 066; exact 1998 configuration and conditions apply
  • 1122 141 4000 — Summer/winter shutterNew version · 066; exact 1998 configuration and conditions apply
  • 1122 084 8206 — Winter cover plateOriginal version / historical spare status · 066; exact 1998 configuration and conditions apply
  • 1122 084 8207 — Winter cover plateNew version · 066; exact 1998 configuration and conditions apply
  • 1122 007 1027 — Intake-air preheating kitOriginal version / historical spare status · 066; exact 1998 configuration and conditions apply
  • 1122 140 1901 — Preheating carburetor-box coverOriginal version / historical spare status · 066; exact 1998 configuration and conditions apply
  • 1122 141 2500 — CoverOriginal version / historical spare status · 066; exact 1998 configuration and conditions apply
  • 9438 929 4040 — Blind rivetOriginal version / historical spare status · 066; exact 1998 configuration and conditions apply

Conditional replacement · 066

066 new fan housings: older-machine use is explicit

New bare fan housing 1122 080 1816 and complete rewind-starter housing 1122 080 2110 may also be used on older 066 machines, with the revised segment and housed rewind spring distinguished.

X 39 176 186 — TI01/1998 summary introduction of the described 066 modification; not a universal whole-saw interchange boundary.

  • Bare fan housing 1122 080 1808 changes to 1122 080 1816 from X39 176186. Complete fan housing with rewind starter 1122 080 1815 changes to 1122 080 2110. Remark 7 permits both new housing versions on older machines; this does not grant blanket interchange to every other part in the bulletin.
  • The comparison drawing has original left and new right. Larger air inlets are intended to increase airflow and reduce dirt buildup; no measured airflow or cooling result is claimed.
  • The new rewind spring is housed and secured inside the fan housing with two IS M4x10 spline screws. The drawing labels spring 1 and segment 2. New segment 1122 084 7809 is shaped to fit the new fan housing.
  • The bare fan housing summary includes segment item 33 and spring item 34. Segment changes 1122 084 7808 to 1122 084 7809; rewind spring 1129 190 0600 to 1122 190 0605. It does not say the bare housing includes the complete starter contents.
  • The summary lists original IS M4x12 screws 9022 313 0660 (2x), and new IS M4x10 screws 9022 341 0650 (4x). The four-screw total is not the spring fastening count: prose specifies two for the housed spring. Do not assign the other two a location without evidence.
  • Original complete starter housing is supplied while factory stocks last (remark 6); original bare housing is no longer supplied (remark 3). Original segment remains a spare (remark 1), and original spring/M4x12 screws remain for older machines (remark 4). All availability is historical.

Source: TI 1/1998, p. 4 · TI 1/1998, p. 5 · TI 1/1998, p. 6 — Section5 and fan/spring drawings; summary items31–36 and remarks3,4,6,7.

Part numbers (10)
  • 1122 080 1815 — Complete fan housing with rewind starterOriginal version / historical spare status · 066; exact 1998 configuration and conditions apply
  • 1122 080 2110 — Complete fan housing with rewind starterNew version · 066; exact 1998 configuration and conditions apply
  • 1122 080 1808 — Bare fan housingOriginal version / historical spare status · 066; exact 1998 configuration and conditions apply
  • 1122 080 1816 — Bare fan housingNew version · 066; exact 1998 configuration and conditions apply
  • 1122 084 7808 — SegmentOriginal version / historical spare status · 066; exact 1998 configuration and conditions apply
  • 1122 084 7809 — SegmentNew version · 066; exact 1998 configuration and conditions apply
  • 1129 190 0600 — Housed rewind springOriginal version / historical spare status · 066; exact 1998 configuration and conditions apply
  • 1122 190 0605 — Housed rewind springNew version · 066; exact 1998 configuration and conditions apply
  • 9022 313 0660 — IS M4x12 spline screw (2x)Original version / historical spare status · 066; exact 1998 configuration and conditions apply
  • 9022 341 0650 — IS M4x10 spline screw (4x)New version · 066; exact 1998 configuration and conditions apply

Service note · 064 / 066

064 / 066: steel starter post replaces aluminium

Fan housing 1122 080 1808 retains its number while its included starter post changes.

  • Original aluminium starter post 1122 080 6500 changes to steel starter post 1122 080 6501 to reduce wear. Fan housing 1122 080 1808 retains its number and includes the new post; only the modified fan housing is factory-supplied.
  • The ORIGINAL starter post remains factory-supplied only until existing stocks are exhausted. This availability distinction does not mean both fan-housing versions remain available. No post installation/removal procedure, dimension, or blanket interchange guarantee is provided.
  • TI08/1994 names historical 064 and 066, series 1122, not later MS models. All six changes are in progress; no numeric serial cutoff is supplied. Publication date is January 31, 1994; 08.94 is the bulletin identifier, not an August production date. MOQ columns are commercial order quantities, not installed counts. No physical interchange test was performed.

Source: TI 8/1994, p. 3 · TI 8/1994, p. 4 — steel starter post replaces aluminium.

Part numbers (3)
  • 1122 080 1808 — Fan housing including starter postunchanged number · steel starter post replaces aluminium
  • 1122 080 6500 — Aluminium starter postoriginal; while stocks last · steel starter post replaces aluminium
  • 1122 080 6501 — Steel starter postnew version · steel starter post replaces aluminium

Service note · 064 / 066

064 / 066: rewind spring uses disposable sheetmetal holder

1128 190 0600 changes to 1129 190 0600; the original spring housing is deleted.

  • Replacement rewind springs for 064/066 will be supplied in a sheetmetal holder of the type introduced with the launch of 020 T. This mention is timing/design context, NOT an assignment of every listed 064/066 component to 020 T.
  • The original spring housing is deleted. The sheetmetal holder can be scrapped AFTER installing the rewind spring; it is not a replacement housing to retain in service. Claimed benefits are lower weight, one fewer part to wear, cheaper replacement and improved service friendliness; no quantified performance is supplied.
  • Rewind spring 1128 190 0600 changes to 1129 190 0600. Original spring remains factory-supplied only until existing stocks are exhausted. The drawing and text are not a complete tensioned-spring installation procedure. Prior TI20.93 is a reference, not reviewed here by proxy.
  • TI08/1994 names historical 064 and 066, series 1122, not later MS models. All six changes are in progress; no numeric serial cutoff is supplied. Publication date is January 31, 1994; 08.94 is the bulletin identifier, not an August production date. MOQ columns are commercial order quantities, not installed counts. No physical interchange test was performed.

Source: TI 8/1994, p. 4 — rewind spring uses disposable sheetmetal holder.

Part numbers (2)
  • 1128 190 0600 — Rewind springoriginal; while stocks last · rewind spring uses disposable sheetmetal holder
  • 1129 190 0600 — Rewind spring with sheetmetal holdernew version · rewind spring uses disposable sheetmetal holder

Service note · 066

066: one-piece starter post replaces two-part assembly

A one-piece post replaces the old post and groove-head screw; introduction is in progress, without a serial cutoff.

  • Original starter post 1122 080 6501 comprises the post and groove-head screw. New one-piece 1122 084 6502 replaces it, MOQ 5. The old screw has a symbol in the old column and a dash in the new column: no separate screw number or new screw is provided.
  • Modification introduction is IN PROGRESS. Neither 064 serial cutoff in this TI applies to the 066 starter post. Original post is supplied only while factory stocks last. No installation torque or universal retrofit procedure is printed. The 2012 IPL calls the new numbered part an axle; that naming difference does not change the printed TI number.
  • Footer: November 9, 1994, D1/MTK-al. Last TI 22/1994 is a provenance reference, not an additional fitting instruction. The catalog title mentions a truncated chain-s phrase, but no chain-sprocket section exists on either of the two original pages; no extra section is inferred.
  • Historical TI 45/1994 guidance, not current stock, universal compatibility or physical verification. No hardware operation was performed.

Source: TI 45/1994, p. 2 — one-piece starter post replaces two-part assembly.

Part numbers (2)
  • 1122 080 6501 — Original two-part starter postincludes groove-head screw; while stocks last · 066 only in the version/configuration described here
  • 1122 084 6502 — New one-piece starter postMOQ 5; introduction in progress · 066 only in the version/configuration described here

Wrong number or missing part for the 066? Report a correction →