← 064/066 · MS 660 · MS 650/640

Stihl 1122 · Section L · 11 of 17 · 20 parts

Throttle control

Fits 066.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192203456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (20)

PosPart numberDescriptionQty
1 1122 182 0902 Switch shaft Fitment / change note → 1
2 1122 180 0905 Switch shaft Fitment / change note → → replaced by 1122 182 0902 TI 1/1998 1
3 1122 442 1603 Contact spring 1
4 1122 442 2500 Axle 1
5 1122 182 2100 Support 1
6 1122 180 1500 Throttle trigger 1
7 9371 470 2600 Cylindrical pin 5x16 1
8 1122 182 1502 Throttle rod 1
9 1117 182 4500 Torsion spring 1
10 1117 182 0805 Lockout lever 1
11 1122 791 0600 Handle molding 1
12 9099 021 2810 Self-tapping screw 3.9x19 1
13 1127 141 8600 Impulse hose 1
14 0000 989 0812 Grommet 1
15 1122 182 0700 Grommet 1
16 1122 123 7501 NLA Grommet Fitment / change note → 1
17 1122 123 7503 Grommet 1
18 1121 442 0402 NLA Insulating hose 35 mm / 1.4'' 1
19 1122 400 5000 LED 1
20 1122 432 2300 Plug 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · 066

066 switch shaft: shorter travel, changed number group

Switch shaft 1122 180 0905 is replaced by 1122 182 0902 for shorter switch travel; preserve the printed 180-to 182 number-group change.

X 39 176 186 — TI01/1998 summary introduction of the described 066 modification; not a universal whole-saw interchange boundary.

  • The stated purpose is optimized switch movements with shorter travel; the TI gives no travel distance or adjustment procedure.
  • Original switch shaft remains a spare under remark 1. This is not an instruction to normalize 1122 182 0902 to an 180-group number.
  • The summary says all other parts as before and introduction from X39 176186. These statements describe this 066 modification, not shared-sheet 064/MS660 applicability or proof of universal parts interchange. The original cover names 066 despite the imported search title mentioning 064; footer 1998 and last TI36.97 are bibliographic, not review dates.

Source: TI 1/1998, p. 4 · TI 1/1998, p. 6 — Section6 and summary item43 / final notes.

Part numbers (2)
  • 1122 180 0905 — Switch shaftOriginal version / historical spare status · 066; exact 1998 configuration and conditions apply
  • 1122 182 0902 — Switch shaftNew version · 066; exact 1998 configuration and conditions apply

Conditional replacement · 066

066: new screwdriver guide fits flush with limiter caps

1122 123 7501 accompanies the new carburetor and replaces 7500.

  • Historical TI02/1998 for 066, series 1122 only; EPA restrictions and actual carburetor/version govern. No extension to 064, MS 660 or other successors. Introduction in progress; no serial cutoff supplied. No hardware operation was performed.
  • Grommet 1122 123 7501 replaces 1122 123 7500 together with the new carburetor. It guides the carburetor screwdriver, fits the illustrated carburetor recess and is flush with limiter caps. H, L and LA markings in the drawing identify controls; they are not new mixture settings.
  • Original grommet remains available as a spare under remark 1. Match actual carburetor/guide geometry; no stand-alone universal retrofit is established.

Source: TI 2/1998, p. 4 · TI 2/1998, p. 6 — Section 2 and drawing 137TI037 KN, summary row 7/remark 1.

Part numbers (2)
  • 1122 123 7500 — Original screwdriver guide grommetRetained original spare · 066; match the version and EPA restrictions in conditions
  • 1122 123 7501 — Shaped guide grommetNew · 066; match the version and EPA restrictions in conditions

Wrong number or missing part for the 066? Report a correction →