← 064/066 · MS 660 · MS 650/640

Stihl 1122 · Section B · 2 of 16 · 31 parts

Cylinder, Muffler

Fits MS 650.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121314141516161718192202122232425262727282934556789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (31)

PosPart numberDescriptionQty
1 1122 020 1219 Cylinder with piston Ø 52 mm — 84.9 cc 1
2 1122 030 2003 Piston Ø 52 mm — 84.9 cc 1
3 1122 034 3000 Piston ring Ø 52x1.2 mm — 84.9 cc 2
4 1122 034 1500 Piston pin 12x8x33 1
5 9463 650 1200 Snap ring 12x1 2
6 1122 025 2200 Plug 1
7 9022 371 1350 Spline screw IS-M6x25 → replaced by 9022 341 1370 TI 3/1999 4
8 1128 020 9400 Decompression valve 1
9 1122 084 1405 Cover 1
10 1122 029 2301 Cylinder gasket 0.5 mm 1
11 9512 003 3281 Needle cage 12x17x13 1
12 1122 140 0604 Muffler 1
13 1122 145 0801 NLA Exhaust casing 1
14 1122 149 0500 Gasket 1
15 1122 140 0603 Muffler → replaced by 1122 140 0609 TI 19/1995 1
16 1122 141 9001 NLA Screen 1
17 1122 140 0800 Exhaust casing 1
18 1118 141 9005 Screen 1
19 9099 021 0810 Self-tapping screw 4.2x9.5 1
20 0000 148 6000 Tensioning gear 2
21 1122 140 0607 Muffler 1
22 1122 145 0807 Exhaust casing 1
23 1122 140 0614 Muffler 1
24 1122 145 0811 Exhaust casing 1
25 1125 149 0601 Muffler gasket 1
26 9022 341 0980 Spline screw IS-M5x16 2
27 9022 341 1300 Spline screw IS-M6x20 2
28 9022 341 0910 Spline screw IS-M5x6 2
29 1110 400 7005 Spark plug Bosch WSR 6 F 1
29 0000 400 7000 Spark plug NGK BPMR7A 1
Not numbered on the diagram — assemblies, kits and options
— 1122 007 1053 Set of gaskets 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · MS 650

MS 650 introduction: engine dimensions, output and speed limits

The 2005 launch specification is not a universal MS 660 interchange claim.

  • MS 650 series 1122 was developed on the basis of MS 660 and positioned between MS 460 and MS 660 for harvesting and big-timber work. This does not establish interchangeable internal parts or a production serial cutoff.
  • Single-cylinder two-stroke engine: printed displacement 5.10 cu in (84.9 cm³), bore 2.05 in (52 mm), stroke 1.57 in (40 mm), ISO 7293 output 6.44 hp (4.8 kW). Preserve the printed displacement pair: 5.10 cu in is about 83.57 cm³, not 84.9 cm³. Do not silently correct either source value or overwrite the canonical specification.
  • Idle speed 2500 rpm; maximum permissible speed 13,500 rpm WITH BAR AND CHAIN. Weight 16.1 lb (7.3 kg) WITHOUT CUTTING ATTACHMENT. The maximum-speed and weight configurations differ; neither is a bare-engine operating permission.
  • Historical TI10/2005 MS 650 guidance only; the linked catalog sheets are navigation anchors, not proof that all later variants share these specifications. No physical interchange test was performed.

Source: TI 10/2005, p. 1 · TI 10/2005, p. 2 — MS 650 introduction: engine dimensions, output and speed limits.

No additional parts-table entry added.

Wrong number or missing part for the MS 650? Report a correction →