← 064/066 · MS 660 · MS 650/640

Stihl 1122 · Section D · 4 of 16 · 22 parts

Clutch, Chain sprocket

Fits MS 650.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11010111111111112131415161718181823456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (22)

PosPart numberDescriptionQty
1 1122 162 1000 Cover washer 52 mm / 2 1/16" 1
2 1122 160 2300 Carrier 1
3 1122 162 3005 Retainer 3
4 1122 162 0801 Clutch shoe 3
5 0000 997 0912 Tension spring → replaced by 0000 997 5510 TI 19/2010 3
6 0000 997 0911 Tension spring → replaced by 0000 997 0912 TI 10/2008 3
7 9512 933 2382 Needle cage 10x16x13 → replaced by 1122 967 1507 TI 1/2003 1
8 0000 642 1216 Rim sprocket 3/8" 8T option 1
9 not sold separately Clutch drum not available as a separate item 1
10 0000 958 1032 Washer Ø 27 mm 1
11 9460 624 0801 E-clip 8x1.3 1
12 0000 642 1223 Rim sprocket 3/8" 7T 1
13 0000 642 1207 Rim sprocket 0.404" 7T option 1
14 1122 640 2006 NLA Chain sprocket 3/8" 7T Picco option 1
15 1122 640 2000 NLA Chain sprocket 3/8" 8T option 1
16 1122 640 2001 NLA Chain sprocket 0.404" 7T option 1
17 1122 640 2002 NLA Chain sprocket 3/8" 7T option 1
18 0000 958 1029 NLA Washer Ø 33 mm option 1
Not numbered on the diagram — assemblies, kits and options
— 1122 160 2002 Clutch 1
— 1122 007 1001 Rim sprocket kit 3/8" 8T option 1
— 1122 007 1000 Rim sprocket kit 3/8" 7T 1
— 1122 007 1002 Rim sprocket kit 0.404" 7T option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · MS 650

MS 650 cutting equipment: listed sizes are not a combination matrix

The 3/8-inch chain listing and .404-inch sprocket option remain distinct.

  • Rollomatic or Duromatic bars: 16, 18, 20, 24, 30, 32 and 36 inches. Oilomatic chain families: Rapid Micro, Rapid Super, Rapid Super C, Rapid Super C3 and Rapid Micro 2; chain pitch printed as 3/8 inch, gauges .050 inch (1.3 mm) and .063 inch (1.6 mm).
  • Sprockets listed separately: 7-tooth 3/8-inch spur; 7-tooth 3/8-inch rim; 8-tooth 3/8-inch rim; 7-tooth .404-inch rim. The .404-inch rim option does NOT make a .404-inch sprocket compatible with the listed 3/8-inch chain.
  • The bulletin does not map every bar length to every chain, gauge, sprocket and drive-link count. Do not generate all combinations, infer a .404-inch chain specification, or treat the cover photograph as a measured bar length.
  • Historical TI10/2005 MS 650 guidance only; the linked catalog sheets are navigation anchors, not proof that all later variants share these specifications. No physical interchange test was performed.

Source: TI 10/2005, p. 3 — MS 650 cutting equipment: listed sizes are not a combination matrix.

No additional parts-table entry added.

Wrong number or missing part for the MS 650? Report a correction →