Stihl 1123 · Section H · 8 of 19 · 26 parts
Chain brake
Fits 021, 023, 025.
Historical fitment & changes (6) — includes parts and conditions not shown on this drawing.
Parts (26)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1123 792 9100 | Hand guard Fitment / change note → → replaced by 1123 790 9150 TI 13/1994 | 1 |
| 2 | 1121 160 5000 | Lever → replaced by 1128 160 5000 TI 8/1994 | 1 |
| 3 | 1123 162 7800 | Flat spring Fitment / change note → | 1 |
| 4 | 0000 958 0521 | Washer | 1 |
| 5 | 1123 162 5800 | Strap | 1 |
| 6 | 9460 624 0400 | E-clip 4 | 1 |
| 7 | 1123 160 5400 | Brake band | 1 |
| 8 | 1123 162 7902 | Tension spring | 1 |
| 9 | 1123 021 1100 | Cover | 1 |
| 10 | 9075 478 3015 | Pan head self-tapping screw IS-D4x15 | 2 |
| 11 | 1123 648 6600 | Bumper strip | 2 |
| 12 | 1127 791 7200 | Sleeve Fitment / change note → | 1 |
| 12 | 1118 791 7205 | Sleeve | 1 |
| 13 | 1123 792 5505 | Bushing | 1 |
| 14 | 9443 825 7130 | Hollow rivet 7.5x1x6.8 | 1 |
| 15 | 9075 478 4155 | Pan head self-tapping screw IS-D5x24 Fitment / change note → | 1 |
| 16 | 9075 478 4165 | Pan head self-tapping screw IS-D5x32 Fitment / change note → | 1 |
| 17 | 1123 640 1705 | Chain sprocket cover Fitment / change note → | 1 |
| 18 | 0000 955 0801 | Hexagon nut M8 | 2 |
| 19 | 1123 664 0500 | Bumper spike Fitment / change note → option | 1 |
| 20 | 9075 478 4115 | Pan head self-tapping screw IS-D5x16 option | 2 |
| 21 | 1123 656 7700 | Chain catcher option | 1 |
| 22 | 0000 967 3630 | Instruction label | 1 |
| 40 | 1123 792 5500 NLA | Bushing Fitment / change note → → replaced by 1127 791 7200 TI 13/1994 | 1 |
| 41 | 0000 997 0628 | Spring Fitment / change note → | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1123 790 9150 NLA | Hand guard Fitment / change note → | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 021 / 023 / 025
021 / 023 / 025: revised hand guard includes the new sleeve
Fan-side guard revision replaces the bushing, while the original bushing remains for older machines.
- Hand guard 1123 792 9100 changes to 1123 790 9150. Fan-side mounting is modified for sleeve 1127 791 7200 (drawing 2) instead of bushing 1123 792 5500 (drawing 1). The new hand guard is supplied INCLUDING the sleeve and an instruction sheet; this does not establish that the sleeve alone fits an unmodified original guard.
- Original guard is no longer factory-available, but original bushing REMAINS available for older machines. Introduction is in progress with no serial. The separate supplied instruction sheet is referenced, not reproduced or accepted as reviewed by this TI note.
- Historical TI 13/1994 guidance for the explicitly named models only; no successor or unlisted variant applicability inferred. Factory supply statements are historical, not current stock claims. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.
Source: TI 13/1994, p. 2 — 021 / 023 / 025: revised hand guard includes the new sleeve.
Part numbers (4)
- 1123 792 9100 — Original hand guardno longer factory-available · 021 / 023 / 025: revised hand guard includes the new sleeve
- 1123 790 9150 — Revised hand guard including sleevenew assembly · 021 / 023 / 025: revised hand guard includes the new sleeve
- 1123 792 5500 — Original bushing, drawing 1retained for older machines · 021 / 023 / 025: revised hand guard includes the new sleeve
- 1127 791 7200 — Sleeve, drawing 2included with revised guard · 021 / 023 / 025: revised hand guard includes the new sleeve
Service note · 021 / 023 / 025
021 / 023 / 025: flat brake spring fits old and new engine housings
Original cam lever cannot be reused with a new housing on an older machine.
X 28 310 255 — Printed component-specific introduction, not a universal machine cutoff or unrestricted interchange guarantee.
- FROM X 28 310 255, flat spring 1123 162 7800 replaces cam lever 1123 162 5010 and helical spring 0000 997 0628. New engine housing deletes cam pivot hole and helical-spring anchor pin, adding flat-spring support rib.
- On machines UP TO X 28 310 254, fitting NEW engine housing means original cam lever CANNOT BE USED. Each new replacement housing includes flat spring. For chain-brake repair flat spring can fit BOTH ORIGINAL AND NEW housing versions. Do not infer cam lever fits new housing.
- Engine housings retain numbers 1123 020 3005 (standard) and 1123 020 3006 (easy start). Notched pin 2.6x 8 0000 974 1200 deleted here; pin and helical spring remain available for older machines/other models. Old cam and unmodified housings only until stocks exhausted. Table says each housing includes items 1/2 across old/new columns, not both deleted pin and flat spring in new housing. MOQ 10 is not ten fitted springs.
- Historical TI 26/1994 guidance only. No successor or unlisted model applicability inferred. Factory supply and warranty statements are historical, not current availability or entitlement. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.
Source: TI 26/1994, p. 1 · TI 26/1994, p. 2 — 021 / 023 / 025: flat brake spring fits old and new engine housings.
Part numbers (6)
- 1123 162 5010 — Cam leverold; stocks only · 021 / 023 / 025: flat brake spring fits old and new engine housings
- 0000 997 0628 — Helical springold; retained for older/other machines · 021 / 023 / 025: flat brake spring fits old and new engine housings
- 1123 162 7800 — Flat springnew; both housing versions · 021 / 023 / 025: flat brake spring fits old and new engine housings
- 1123 020 3005 — Standard engine housingsame number · 021 / 023 / 025: flat brake spring fits old and new engine housings
- 1123 020 3006 — Easy-start engine housingsame number · 021 / 023 / 025: flat brake spring fits old and new engine housings
- 0000 974 1200 — Notched pin2.6x8deleted here; older/other machines · 021 / 023 / 025: flat brake spring fits old and new engine housings
Service note · 021 / 023 / 025
Series 1123 sprocket cover: replacement remark and misplaced marker
Cover 1123 640 1705 replaces 1123 648 0400; the same printed remark marker on a twist lock remains a source conflict.
- Section 5 lists chain sprocket cover 1123 640 1705 with remark 2: replaces original 1123 648 0400 on ALL SERIES 1123 saws. Later H chain-brake sheet shows 1705 at key 17. This is the historical 1995 replacement scope, not unlimited compatibility with later redesigns.
- The ORIGINAL SCAN also puts remark 2 on twist lock 1124 140 9500. Because remark 2 describes replacing a chain sprocket cover, this attachment is internally inconsistent. Retain both printed markers; do NOT create a twist-lock-to-sprocket-cover interchange edge or silently erase the conflict.
- The table separately lists nameplate 023 L 1123 967 1506. This plate is ONLY for 023 L, not the standard 021/023/025 models used for navigation here. Later O handle-housing sheet key 17 includes this plate among several named variants. A nameplate alone does not convert a saw or identify its power rating.
- Table item numbers 1–5,7–8 are inclusion references; no item 6 is printed. There are no MOQ, serial cutoffs or dimensional instructions in this parts table. Remark 1 concerns the buffer’s prior use elsewhere; remark 3 concerns the throttle rod, not all listed parts.
- Historical TI guidance for the stated variant or accessory only; catalog links and shared numbers are not proof of unrestricted interchange. No serial changeover, current supply guarantee or physical fitment test is implied. No hardware operation was performed.
Source: TI 17/1995, p. 10 — Section 5 sprocket-cover/nameplate rows, remarks 1–3 and footer.
Part numbers (4)
- 1123 640 1705 — Chain sprocket coverremark 2 historical series 1123 replacement · 021; 023; 025
- 1123 648 0400 — Original chain sprocket coverreplaced by 1123 640 1705 · 021; 023; 025
- 1124 140 9500 — Twist lockmisplaced remark 2 retained · 021; 023; 025
- 1123 967 1506 — Nameplate 023 LONLY 023 L; not all navigation models · 023 L only
Service note · 023
023 L hand guard: longer fan-side mounting screw
Replace 5 x 24 mm with 5 x 32 mm on 023 L saws brought in for repair.
- 023 L ONLY: original fan-side hand-guard spline screw 9075 478 4155 (5 x 24 mm) is replaced by 9075 478 4165 (5 x 32 mm). The longer screw should be installed in ALL 023 L MACHINES BROUGHT IN FOR REPAIR; tightening torque 3.7 Nm (2.8 lbf.ft). Figure labels the longer screw 32 mm (1.25 inch).
- Introduction IN PROGRESS; no serial cutoff. Original short screw remains available as a spare. Continued supply and its other locations on the shared IPL do not waive the 023 L fan-side service instruction or make every 5 x 24 mm screw a replacement target.
- Shared chain-brake sheet H keys 15/16 lists both screw numbers. The note is indexed under base model 023 for navigation, but does NOT apply this change to standard 023, 021 or 025. No torque for the opposite mounting point is supplied here.
- Historical TI guidance for the named models and stated versions only. Shared IPL sheets or series do not extend applicability to other variants or successor models. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.
Source: TI 29/1995, p. 1 — Section 1 hand guard, figure 135TI022 SC and complete summary/remark.
Part numbers (2)
- 9075 478 4155 — Original fan-side spline screw 5 x 24 mmreplaced at stated location; retained as spare · 023 L; Section 1 hand guard, figure 135TI022 SC and complete summary/remark
- 9075 478 4165 — Fan-side spline screw 5 x 32 mm023 L service replacement · 023 L; Section 1 hand guard, figure 135TI022 SC and complete summary/remark
Service note · 021 / 023 / 025
021 / 023 / 025 quick tensioner requires longer-spike bumper
Bumper 0501 is mandatory; 0500 is the illustrated comparison, not an alternative.
- For SAFETY REASONS, spiked bumper 1123 664 0501 MUST be fitted to the engine housing of machines WITH A QUICK CHAIN TENSIONER. Longer spikes help provide better contact with the wood during cutting; this is not an optional accessory recommendation.
- When replacing the engine housing, remove 0501 from the faulty housing and mount it on the replacement; tightening torque 3.7 Nm (2.8 lbf.ft). The earlier collar-screw step uses approximately 8 Nm; do not transfer that torque to the bumper.
- Figure LEFT is original comparison bumper 1123 664 0500; RIGHT is 1123 664 0501 for the quick tensioner. No dimensions or modification procedure are supplied; do not infer that 0500 can be reshaped to meet the requirement.
- Later quick-tensioner sheet E key 13 lists 0501 and chain-brake sheet H key 19 lists 0500. Co-listing on shared-model sheets does not make them interchangeable for the stated quick-tensioner application.
- Historical TI guidance for the named models and stated versions only. Shared IPL sheets or series do not extend applicability to other variants or successor models. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.
Source: TI 29/1995, p. 3 — Section 3.2 spiked-bumper service step, safety statement and figure 135TI011.
Part numbers (2)
- 1123 664 0500 — Comparison spiked bumperillustration left; not the required quick-tensioner version · 021 / 023 / 025; Section 3.2 spiked-bumper service step, safety statement and figure 135TI011
- 1123 664 0501 — Longer-spike bumperrequired for quick chain tensioner · 021 / 023 / 025; Section 3.2 spiked-bumper service step, safety statement and figure 135TI011
Service note · 021 / 023 / 025
021 / 023 / 025 standard sprocket cover: press-fitted metal rings
Different material, same cover number 1123 640 1705.
- STANDARD chain sprocket cover 1123 640 1705 changes to a different material, with METAL RINGS PRESS-FITTED in the collar-stud area indicated by the figure arrows. Part number remains UNCHANGED; a number match alone does not identify the physical revision.
- Only modified cover available from factory; introduction IN PROGRESS, no serial cutoff. The material composition, ring ordering numbers, interference dimensions and fitting force are not specified. This is a factory part revision, not a field instruction to press rings into an older cover.
- Later shared chain-brake sheet H key 17 lists 1705. The heading explicitly says STANDARD cover; the quick-tensioner cover is not included by inference from the adjacent section.
- Historical TI guidance for the named models and stated versions only. Shared IPL sheets or series do not extend applicability to other variants or successor models. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.
Source: TI 29/1995, p. 4 — Section 4 cover figure 135TI026 SC and complete summary/remark.
Part numbers (1)
- 1123 640 1705 — Standard chain sprocket coversame-number material/ring revision · 021 / 023 / 025; Section 4 cover figure 135TI026 SC and complete summary/remark
Wrong number or missing part for the 021, 023, 025? Report a correction →