Stihl 1124 · Section M · 12 of 15 · 28 parts
Shroud, Air filter HD
Fits 084.
Historical fitment & changes (5) — includes parts and conditions not shown on this drawing.
Parts (28)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1124 080 1603 | Shroud | 1 |
| 2 | 1124 084 8300 | Reflector foil | 1 |
| 3 | 1124 084 8302 | Reflector foil | 1 |
| 4 | 0000 963 0808 | Bushing | 2 |
| 5 | 1124 967 1500 | Model plate 084 AVEQ | 1 |
| 6 | 0000 974 1000 | Round head rivet 3x6 | 2 |
| 7 | 1124 084 8900 | Ring | 1 |
| 8 | 9416 868 5630 | Hollow rivet 5.5x0.5x6.8 | 2 |
| 9 | 9022 341 0980 | Spline screw IS-M5x16 | 2 |
| 10 | 1124 084 8700 | Collar screw | 1 |
| 11 | 1124 120 3412 | Filter base | 1 |
| 12 | 1122 122 6605 NLA | Collar screw | 1 |
| 13 | 1124 647 3600 | Pushbutton | 1 |
| 14 | 0000 997 0729 | Compression spring | 1 |
| 15 | 9460 624 0400 | E-clip 4 | 1 |
| 16 | 1124 141 8305 | Slotted nut | 2 |
| 17 | 1124 647 3505 | Lever | 1 |
| 18 | 0000 140 4402 | Air filter HD2 | 1 |
| 19 | 0000 124 0800 | Filter insert Fitment / change note → | 1 |
| 20 | 0000 141 0300 | Prefilter Fitment / change note → | 1 |
| 21 | 1124 140 1000 | Filter cover Fitment / change note → | 1 |
| 22 | 1124 140 9500 | Twist lock | 1 |
| 23 | 1124 129 0900 NLA | Gasket Fitment / change note → | 1 |
| 24 | 1124 124 0804 | Filter insert Fitment / change note → | 1 |
| 25 | 1124 120 1620 | Air filter HD Fitment / change note → | 1 |
| 26 | 1124 141 0301 | Prefilter Fitment / change note → | 1 |
| 27 | 0781 867 7540 | HD filter oil 100 ml | 1 |
| 28 | 0781 867 8540 | HD filter oil 300 ml | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · 044 / 066 / 084
044 / 066 / 084: foam required with the shared HD filter
TI 46/1995 explicitly requires foam 1124 124 0804 on 044, 066 and 084, unlike 046.
Later reviewed guidance: 044 / 064 / 066 / 084: dry HD filter requires inner foam · 066 new filter system: winter mesh, dry HD and foam scope
- The stated HD assembly 0000 120 1650 was introduced for 044 in TI 20/1995, 066 in TI 10/1995 and 084 in TI 18/1995. Those model names are explicit; no automatic expansion to 064, 088, MS 440, MS 660 or MS 880 is made.
- The foam is necessary for 044, 066 and 084 but not required for 046; it remains in the shared package. Package contents alone do not determine installation on a specific model.
- The separate model-specific instruction sheet remains unavailable in the reviewed sources. TI 10/1995 and TI 18/1995 exist in the retained queue but are not declared reviewed by this comparison.
Source: TI 46/1995, p. 10 — 5.1.3: other-model scope of shared HD filter.
Part numbers (2)
- 0000 120 1650 — HD filter assemblyShared assembly · 044, 066, 084 with foam
- 1124 124 0804 — Foam elementRequired on named models · 044, 066, 084; not the 046 requirement
Historical fitment · 044 / 064 / 066 / 084
044 / 064 / 066 / 084: dry HD filter requires inner foam
Dry fleece replacement, cleaning and model-specific foam rule.
Later reviewed guidance: 066 new filter system: winter mesh, dry HD and foam scope
- Dry fleece HD filter 0000 120 1652 replaces oil-impregnated HD filter 0000 120 1650. The new filter carries the crossed-out OIL pictogram and does not need oil impregnation. This is not a blanket no-oil rule for the original filter or unrelated filter materials.
- When cutting power noticeably drops, clean felt prefilter 0000 141 0300. After several prefilter cleanings, or if power remains low with a clean prefilter, remove the felt prefilter and clean the HD filter; carefully blow from the clean-air side if possible. On 044/064/066/084 also remove inner foam 0000 124 0800 for cleaning.
- For stubborn dirt or caked fleece, wash filter parts in a clean non-flammable solution, such as warm soapy water. No air-pressure value, solvent recipe, drying duration or oiling step is supplied by this bulletin.
- Fine trapped dirt may remain after cleaning and shorten cleaning intervals with extended use. Replace the filter when those intervals are no longer practical, or if thorough cleaning after long operation still leaves a noticeable cutting-power loss. No fixed service-hour limit or diagnosis excluding other causes is established.
- Introduction is in progress, without a numeric cutoff. Original filter 0000 120 1650 was no longer supplied by the factory in this historical source, not a present stock assertion. An included instruction sheet is mentioned but is not reproduced or claimed reviewed here; the printed bulletin procedures above stand on their own.
- Inner foam element 0000 124 0800 is included in the supplied HD filter and is required for 044, 064, 066 and 084. Refit the applicable inner foam after cleaning; the 046/088 removal rule does not apply to these models.
- No later MS-model, every air-filter system or physical interchange claim is inferred from the shared part number.
Source: TI 43/1996, p. 1 · TI 43/1996, p. 2 — Both complete pages: dry fleece identification, cleaning, service life, installation and supply summary.
Part numbers (4)
- 0000 120 1650 — Oil-impregnated HD air filterOriginal · 044 / 064 / 066 / 084
- 0000 120 1652 — Dry fleece HD air filterReplacement · 044 / 064 / 066 / 084
- 0000 141 0300 — Felt prefilterCleaning subject · 044 / 064 / 066 / 084
- 0000 124 0800 — Inner foam elementRequired · 044 / 064 / 066 / 084
Service note · 084
084 HD filter: complete assembly replaces separately supplied element
New complete filter 0000 120 1650 includes element, foam insert and felt prefilter; original kit is stock-limited.
X 31 237 198 — Modified HD filter introduced from this machine number on HD-equipped 084; not a change to every air-filter configuration.
- The modified HD design replaces the original metal-cover version with an INTEGRALLY MOLDED RUBBER COVER and TWO PERIPHERAL ELASTOMER SEALING LIPS. The separate filter-base gasket 1124 129 0900 is deleted for this new design. Improved fine-dust retention and firm felt-prefilter fit are source claims, not measured filtration efficiency.
- Complete HD filter 0000 120 1650 (MOQ H 1) includes items 1–3: element, foam insert and felt prefilter. Original element 1124 120 1620 has “-*-” in the new column; remark 1 says the NEW ELEMENT IS NOT AVAILABLE SEPARATELY. The complete assembly number is not a one-for-one replacement element number.
- Item 2 filter insert changes 1124 124 0804 to 0000 124 0800 (MOQ H 10). Item 3 felt prefilter changes 1124 141 0301 to 0000 141 0300 (MOQ H 1). Remark 2 retains BOTH old insert and old prefilter as spares; the new insert MOQ 10 does not mean ten inserts per saw.
- Item 4 HD filter kit 1124 007 1026 has no new number. Remark 3 limits factory supply of the original kit to EXISTING STOCKS. This kit is not identical to complete filter 0000 120 1650, and no new complete-kit replacement number is invented.
- Later 084 M shroud/HD sheet retains old element 1620 at key 25, old insert 0804 at 24, old prefilter 0301 at 26 and gasket 0900 at 23; new insert 0800 and prefilter 0300 are at 19/20. Key 18 instead lists HD2 0000 140 4402. This mixed later sheet does NOT make old/new parts freely mixable or extend 1995 oiling instructions to HD2.
- Footer identifies March 30, 1995 and last TI on 084 as 22.92. This bibliographic pointer is not a missing prerequisite for the changes explicitly described here. No production end date or all-084 manufacturing interval is inferred from the single changeover.
- Historical TI guidance for model 084 only; shared series 1124 does not extend these changes to 088, MS 880 or MS 881. No present-day supply guarantee, physical interchange test or model-identification serial range is implied. No hardware operation was performed.
Source: TI 18/1995, p. 2 · TI 18/1995, p. 4 — Section 2 design, full filter table and remarks 1–3.
Part numbers (8)
- 0000 120 1650 — HD filter completeincludes items 1–3; MOQ 1 · 084; Modified HD filter introduced from this machine number on HD-equipped 084; not a change to every air-filter configuration.
- 1124 120 1620 — Original HD filter elementnew element not supplied separately · 084; Modified HD filter introduced from this machine number on HD-equipped 084; not a change to every air-filter configuration.
- 1124 124 0804 — Original filter insertremains available as spare in 1995 · 084; Modified HD filter introduced from this machine number on HD-equipped 084; not a change to every air-filter configuration.
- 0000 124 0800 — New filter insertitem 2; MOQ 10, not installation quantity · 084; Modified HD filter introduced from this machine number on HD-equipped 084; not a change to every air-filter configuration.
- 1124 141 0301 — Original felt prefilterremains available as spare in 1995 · 084; Modified HD filter introduced from this machine number on HD-equipped 084; not a change to every air-filter configuration.
- 0000 141 0300 — New felt prefilteritem 3; MOQ 1 · 084; Modified HD filter introduced from this machine number on HD-equipped 084; not a change to every air-filter configuration.
- 1124 007 1026 — Original HD filter kititem 4; existing factory stocks only · 084; Modified HD filter introduced from this machine number on HD-equipped 084; not a change to every air-filter configuration.
- 1124 129 0900 — Original filter-base gasketdeleted for new HD design · 084; Modified HD filter introduced from this machine number on HD-equipped 084; not a change to every air-filter configuration.
Service note · 084
084 HD fitting: remove old gasket, oil element, keep TOP visible
Foam fits inside; felt fits over the filter with TOP outward. The separate kit maintenance leaflet remains unlocated.
X 31 237 198 — Modified HD filter introduced from this machine number on HD-equipped 084; not a change to every air-filter configuration.
- BEFORE installing the NEW filter element, REMOVE gasket 1124 129 0900 from the filter base. This is not an instruction to remove the gasket from every original-design HD installation, nor from arbitrary later HD2 arrangements.
- Figure 132BB001: impregnate the element with STIHL HD filter oil BEFORE FIRST INSTALLATION. Figure 132BB002: fit the FOAM INSERT INSIDE the HD filter. Figure 132BB003: fit the FELT PREFILTER OVER the HD filter, with the word TOP FACING OUTWARD, and check proper seating.
- Page 4 additionally requires fitting the complete assembly on the base so TOP IS VISIBLE. These are both a prefilter orientation and an installed-assembly check; they are not interchangeable with any arrow on another filter design.
- The TI requires following fitting/maintenance instructions and says a detailed information sheet accompanies each HD filter kit. That exact historical kit leaflet was not identified in the bounded local manual-catalog, cover and resource-filename inventories. This is a named source gap, not a claim of universal absence. This TI is not the full maintenance leaflet; no cleaning interval, oil quantity, solvent or drying procedure is fabricated.
- The instructions concern the oil-treated 1995 HD design only. Later 084 M sheet has HD2 at key 18; shared insert/prefilter numbers do NOT establish that HD2 should be oiled or maintained by this procedure.
- Historical TI guidance for model 084 only; shared series 1124 does not extend these changes to 088, MS 880 or MS 881. No present-day supply guarantee, physical interchange test or model-identification serial range is implied. No hardware operation was performed.
Source: TI 18/1995, p. 2 · TI 18/1995, p. 3 · TI 18/1995, p. 4 — Section 2 service notes, figures 132BB001–003 and page 4 orientation note.
Part numbers (3)
- 1124 129 0900 — Original filter-base gasketremove before new HD element · 084; Modified HD filter introduced from this machine number on HD-equipped 084; not a change to every air-filter configuration.
- 0000 124 0800 — Foam filter insertinside 1995 HD filter · 084; Modified HD filter introduced from this machine number on HD-equipped 084; not a change to every air-filter configuration.
- 0000 141 0300 — Felt prefilterover filter; TOP outward and visible · 084; Modified HD filter introduced from this machine number on HD-equipped 084; not a change to every air-filter configuration.
Service note · 084
084 HD cover: three bonded seals, unchanged part number
From X 32 184 414, cover 1124 140 1000 gains three noise-reducing strips; strips are not separate spares.
X 32 184 414 — Modified cover introduced on all HD-filter versions of 084, not every air-filter configuration.
- Three sealing strips are BONDED to the new filter cover, closing the gap to the carburetor box to help reduce noise emissions. Figure 129TI002 labels the original cover 1 and modified cover 2; the drawing shows one upper strip and two side strips. This is a historical noise-reduction claim, not a measured decibel reduction or current OSHA compliance determination.
- Both original and modified cover retain number 1124 140 1000. A part-number-only lookup therefore cannot distinguish these revisions. The table lists one sealing strip plus sealing strip (2x), totaling THREE, not two or four; “-*-” and remark 2 mean the strips are NOT AVAILABLE SEPARATELY, not unnamed orderable parts.
- Remark 1 says ONLY THE MODIFIED VERSION is available from the factory at issue. MOQ H and key cells are blank; no minimum order quantity, separate strip number, adhesive specification or strip-retrofit procedure is invented.
- Later 084 M shroud/HD sheet key 21 retains cover 1124 140 1000 but does not distinguish the two cover revisions or separately list these strips. Its neighboring HD2 element does not change the TI’s 1995 HD scope or establish an HD2 maintenance procedure.
- Footer dates this TI April 6, 1995 and names TI18.95 as the preceding 084 bulletin. That bibliographic reference is not a missing prerequisite; this cover change has its own serial, distinct from the prior HD-element change.
- Historical TI guidance for model 084 only, subject to the stated version restrictions; shared series or part numbers do not extend this guidance to successor models. No present-day stock guarantee, physical interchange verification or model-identification serial interval is implied. No hardware operation was performed.
Source: TI 21/1995, p. 1 — Complete TI21 prose, figure 129TI002, summary, remarks and footer.
Part numbers (1)
- 1124 140 1000 — HD filter cover including three bonded sealing stripsunchanged number; modified version only from factory in 1995 · 084; Modified cover introduced on all HD-filter versions of 084, not every air-filter configuration.
Wrong number or missing part for the 084? Report a correction →