← 044/046 · MS 440/460/461

Stihl 1128 · Section O · 14 of 17 · 37 parts

Shroud, Air filter

Fits 044.

Parts diagrams →

Historical fitment & changes (10) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141415161718192202122232424253440414243444546474856789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (37)

PosPart numberDescriptionQty
1 1128 080 1624 Shroud 1
2 1128 967 1507 Model plate 044 1
3 1128 967 1508 Model plate 044 C 1
4 1121 084 7100 Cap 1
5 1128 084 8301 Reflector foil 1
6 0000 963 0808 Bushing 3
7 1122 084 7100 Cap 1
8 9022 341 0980 Spline screw IS-M5x16 3
9 1128 120 1625 Air filter Fitment / change note → 1
10 1128 120 4100 Baffle Fitment / change note → 1
11 1124 141 8300 Slotted nut Fitment / change note → 2
12 1128 120 1610 Air filter Fitment / change note → 1
12 1128 120 1605 Air filter 1
13 1128 140 1905 Carburetor box cover Fitment / change note → 1
14 1124 140 9500 Twist lock 1
15 1128 141 4001 Slide 1
16 1128 124 3408 Filter base Fitment / change note → 1
17 1128 120 2201 Flange Fitment / change note → 1
18 1128 122 6610 Collar screw 1
19 9216 263 0700 Hexagon nut M5 Fitment / change note → → replaced by 9220 260 0701 TI 25/1994 2
20 0000 140 4402 Air filter HD2 1
21 0000 124 0800 Filter insert Fitment / change note → 1
22 0000 141 0300 Prefilter Fitment / change note → 1
23 1128 140 1003 Filter cover Fitment / change note → 1
24 1124 121 9100 Bushing 1
25 0000 967 1593 Model plate Magnum 1
40 1124 129 0900 NLA Gasket Fitment / change note → 1
41 1128 967 1500 Model plate 044 1
42 1128 967 1501 Model plate 044 C 1
43 0000 974 1000 Round head rivet 3x6 2
44 1128 084 4100 Shutter 1
45 1128 084 6200 Washer 1
46 9460 624 0400 E-clip 4 1
47 1128 120 1615 Air filter 1
48 1128 124 3406 Filter base 1
Not numbered on the diagram — assemblies, kits and options
— not sold separately Air filter kit no longer available from factory 1
— 1128 007 1002 Air filter kit HD option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · 044

Early 044 HD filter: 1124 120 1620

The original 044 HD filter element is documented as 1124 120 1620. The 1995 change introduced complete filter 0000 120 1650; it is a complete assembly, not a one-for-one element number.

Later reviewed guidance: 044 / 064 / 066 / 084: dry HD filter requires inner foam

X 31 098 388 — New HD-filter design introduced from this machine number; applies to HD-equipped 044s, not every air-filter configuration.

  • Old-design filter on a newer machine: install gasket 1124 129 0900.
  • New-design filter on an older machine: remove gasket 1124 129 0900.
  • These conditions describe the 1995 HD designs. Do not extend them automatically to the later HD2 filter on this IPL.
  • The new 1995 filter replaces the metal-cover design with an integrally molded rubber cover and two peripheral elastomer sealing lips. The original separate base gasket is deleted for this configuration. Better fine-dust retention and a tighter-fitting felt prefilter are source claims, not measured filtration performance.
  • Original page 1 fitting illustrations: impregnate the filter element with STIHL HD filter oil before first installation; fit the foam insert INSIDE the HD filter; fit the felt prefilter OVER it with TOP facing OUTWARD and check seating. These instructions are for the 1995 HD filter only, not an instruction to oil later HD2 designs.
  • HD kit 1128 007 1008 keeps the same number: table inclusion keys 1–5 cover element, insert, prefilter, filter base and sealing ring. Complete filter 0000 120 1650 lists only items 1–3. The base row says includes item 5, while the new sealing-ring cell is deleted; the explicit service note governs gasket use. The inclusion keys are not proof that a new kit requires the deleted gasket or that today’s kit has identical contents.
  • The new filter element is NOT available separately in this bulletin. Only the modified kit is available from the factory; old element, insert and prefilter are while-stocks-last. The old base and sealing ring remain spare parts for the conditional old-filter arrangement. Historical supply statements do not establish current stock.
  • The source prints original filter base 1128 120 3403 and new 1128 124 3408. Keep the printed 120/124 distinction; do not normalize either or manufacture an alias.
  • Page 1 requires the separate detailed fitting/maintenance instruction sheet included with each HD kit. That insert is not in the four-page TI or current admitted manual set, and no matching filter/kit filename was found in the available manual collection. The available TI steps are retained, but no complete maintenance schedule, cleaning process or substitute insert is fabricated.

Source: TI 20/1995, p. 1 · TI 20/1995, p. 2 — Complete section1: construction, all fitting illustrations, service exception, inclusion keys and availability.

Part numbers (10)
  • 1124 120 1620 — HD filter elementOriginal equipment · 044 with original HD system; conditional reuse on newer machines
  • 0000 120 1650 — HD filter completeNew assembly · 044 modified HD system; includes element, insert and prefilter
  • 1124 129 0900 — Gasket / sealing ringConditional companion part · Required with old filter; removed with new 1995 design
  • 1124 124 0804 — Filter insertOriginal equipment · Original 044 HD filter
  • 0000 124 0800 — Filter insertNew version · Modified 044 HD filter
  • 1124 141 0301 — PrefilterOriginal equipment · Original 044 HD filter
  • 0000 141 0300 — PrefilterNew version · Modified 044 HD filter
  • 1128 120 3403 — Filter baseOriginal equipment · Original 044 HD system
  • 1128 124 3408 — Filter baseNew version · Modified 044 HD system
  • 1128 007 1008 — HD air filter kitSame number, modified contents · 044; kit number alone does not distinguish the old and new contents

Historical fitment · 044

HD filter cover change

HD-equipped 044s changed from filter cover 1128 140 1000 to 1128 140 1003, with extended sides to reduce noise.

X 31 849 638 — New cover introduced from this machine number, separately from the filter-element change.

  • Applies to versions with HD filters. This is not the same changeover as the HD filter element.
  • The new cover sides extend forward to close the carburetor-box/filter-cover gap. Reduced noise is the stated design purpose, not a measured decibel reduction or a promise of improved filtration.
  • Page 4 repeats 1128 140 1000 → 1128 140 1003 and X 31 849 638; the original cover is no longer available from the factory in the 1995 bulletin. This is historical availability, not a present-stock check or a new reverse-fitment permission.
  • Last-TI references distinguish worldwide 16/1994 and USA/CAN/JAP07/1995 as bibliography. They do not change the stated HD-equipped 044 scope or create a common serial cutoff. Bulletin dated April 11, 1995; review date is separate.

Source: TI 20/1995, p. 3 · TI 20/1995, p. 4 — Section3 cover comparison drawing, complete summary and historical availability.

Part numbers (2)
  • 1128 140 1000 — HD filter coverOriginal equipment · 044 with HD filter before this cover change
  • 1128 140 1003 — HD filter coverNew version · 044 with HD filter from this cover change

IPL correction · 044 / 046

046 IPL correction: wrong filter base listed

The September 1995 046 IPL, page 25, illustration L, position 7 incorrectly listed the 044 filter base 1128 124 3408. TI 05/1996 specifies 1128 124 3404 for the 046.

  • 1128 124 3408 belongs to the 044 in this correction; its erroneous appearance in that 046 IPL is not evidence of 046 fitment.
  • TI 05/1996 prints 1128 124 3404 for that 046 configuration. This is a historical source statement, not a current ordering recommendation. The historical L/7 locator is not a position on this later drawing.
  • Later TI 44/2000 and the retained 046 IPL use 1128 120 3404 instead. The 124 versus 120 discrepancy is unresolved; do not silently equate these numbers.

Source: TI 5/1996, p. 2 — Section 3: Air filter (correction to 046 parts list).

Part numbers (2)
  • 1128 124 3408 — Filter baseErroneous 046 listing / documented 044 part · 044; not the 046 base specified by this correction
  • 1128 124 3404 — Filter baseCorrected part · 046 configuration in the September 1995 IPL correction

Conditional replacement · 044

044 carburetor cover: vent clearance and a TI dimension conflict

Carburetor box covers 1128 140 1900 and 1128 140 1901 were replaced by 1128 140 1905 with a shortened rib for the new tank vent.

  • 1128 140 1901 is the original automatic-choke version; both old cover numbers map to the new cover in this TI.
  • The TI describes modifying an old cover for vent clearance, but its drawing prints 19.5 mm and 5/64 inch for the same dimension. These are inconsistent. Do not treat that trimming dimension as verified.
  • No serial cutoff is provided. The documented new cover is separate from the unresolved instruction for modifying an old one.
  • One rib is shortened on new cover 1128 140 1905 to clear the new tank vent. The service drawing instructs cutting away its cross-hatched area on an original cover; the inconsistent printed dimension remains unresolved, so no safe cut size or silent unit correction is supplied.
  • Introduction is in progress. Original standard cover 1128 140 1900 is no longer factory-supplied; original automatic-choke cover 1128 140 1901 is supplied only while existing stocks last. Both map to 1128 140 1905 in the table; these historical supply remarks do not establish present stock.

Source: TI 9/1997, p. 3 — Complete section2: rib/cross-hatch drawing,conflicting19.5mm/5/64inch dimension,both summary rows and supply remarks.

Part numbers (3)
  • 1128 140 1900 — Carburetor box coverOriginal equipment · 044 original cover
  • 1128 140 1901 — Carburetor box cover, automatic chokeOriginal equipment · 044 automatic-choke configuration
  • 1128 140 1905 — Carburetor box coverNew version · 044 cover with clearance for revised tank vent

Conditional replacement · 044

044: limiter-cap grommet and revised filter base

The HD filter base changed shape without changing its number; the new grommet accommodates the limiter-cap recess.

  • Grommet 1128 123 7502 is for the carburetor equipped with limiter caps; it replaces 1128 123 7500 in that configuration.
  • HD filter base 1128 124 3408 retains its number despite the shape change. The revised shape allows grommet removal without removing the base.
  • Replacement bases without setting symbols are documented for original and new versions. Do not use an embossed carburetor setting as proof that the installed carburetor matches it.
  • The new grommet sits in the limiter-cap recess and flush with the caps. Standard-production filter bases bear H = 3/4, L = 1/4 setting symbols; neutral replacement bases omit them.
  • Introduction is from the start of EPA-version production. Original grommet remains a spare; only the modified filter base is factory-supplied. These are historical availability notes, not numeric serial boundaries.

Source: TI 47/1997, p. 5 · TI 47/1997, p. 6 — Section 2: grommet and 044 filter base; full section, drawing and summary context reviewed in batch26.

Part numbers (3)
  • 1128 123 7500 — GrommetOriginal configuration · 044 original carburetor opening
  • 1128 123 7502 — GrommetConfiguration-specific replacement · 044 limiter-cap carburetor
  • 1128 124 3408 — HD filter baseSame number, revised shape · 044 HD configuration; inspect revision

Historical fitment · 044

044 arctic: winter element in the HD filter configuration

The EPA-related arctic configuration uses an HD-style filter arrangement with a winter element.

  • Applies to the 044 arctic version with carburetor heating in the described EPA production change, not every 044.
  • Use winter element 0000 120 1651 in this configuration. The source permits an HD cartridge during temperatures above freezing; it does not identify a modern HD2 retrofit here.
  • The table specifies cover, flange, locknut and filter base as configuration components. Do not assume an element-only conversion of an older split-filter arrangement.
  • The former configuration lists carburetor box cover1128 140 1905, front filter half1128 120 1610, baffle1128 120 4100 and rear filter half1128 120 1625. All four remain spares for other versions; this is not evidence that those parts belong in the new winter-element arrangement.
  • The summary heading is printed6.2 although the body section is7.2. Introduction is the start of EPA-version production. Last-TI09/1997 and the1997 copyright imprint are bibliographic context, not additional compatibility or serial evidence.

Source: TI 47/1997, p. 10 · TI 47/1997, p. 11 — Sections 7.2–7.3: arctic filter configuration; full section, drawing and summary context reviewed in batch26.

Part numbers (9)
  • 0000 120 1651 — Winter filter elementNew arctic configuration · 044 arctic with carburetor heating
  • 1128 140 1003 — Filter coverConfiguration component · 044 arctic HD-style arrangement
  • 1128 120 2201 — FlangeConfiguration component · 044 arctic HD-style arrangement
  • 9216 263 0700 — VM5 locknutConfiguration component · 044 arctic HD-style arrangement
  • 1128 124 3408 — Filter baseConfiguration component · 044 arctic HD-style arrangement
  • 1128 140 1905 — Carburetor box coverFormer arrangement; retained spare for other versions · 044 prior split-filter configuration
  • 1128 120 1610 — Front air-filter halfFormer arrangement; retained spare for other versions · 044 prior split-filter configuration
  • 1128 120 4100 — BaffleFormer arrangement; retained spare for other versions · 044 prior split-filter configuration
  • 1128 120 1625 — Rear air-filter halfFormer arrangement; retained spare for other versions · 044 prior split-filter configuration

Conditional replacement · 044

044: longer collar screws require deeper slotted nuts

Both tank-housing and slotted-nut numbers stay unchanged despite a dimensional change.

  • Collar screws 1125 122 6600 → 1128 122 6606 are 2 mm longer; tank housing 1128 350 0813 retains its number.
  • Slotted nut 1124 141 8300 retains its number while thread depth changes from 8.5 mm to 10.5 mm. The number alone does not establish the depth.
  • Short-thread nuts may be used only with the shorter collar screws projecting 48 mm. If projection is 50 mm, use only the new nut with 10.5 mm thread depth.
  • The bulletin describes the longer screws as simplifying assembly of some models; it does not identify additional model fitment. Its diagram measures projection a from the tank housing, not total screw length.
  • The nut diagram prints 8.5 mm (0.3 inch) and 10.5 mm (0.4 inch). These are the printed rounded inch labels, not substitute precision dimensions.
  • The summary lists tank housing item 4 including collar screw item 5. Introduction is in progress, with no serial threshold supplied.
  • At the bulletin date, unmodified tank housings were to be supplied until factory stocks were exhausted; previous collar screws remained available for other, unnamed models; previous shallow slotted nuts were no longer available from the factory. These distinct supply rules do not remove the physical depth checks.

Source: TI 35/1999, p. 1 · TI 35/1999, p. 2 — Sections 1–1.4: dimensional service note and summary.

Part numbers (4)
  • 1125 122 6600 — Collar screwShorter original version · 044; 48 mm projection
  • 1128 122 6606 — Collar screwLonger version · 044; 50 mm projection requires deeper nut
  • 1124 141 8300 — Slotted nutSame number, different thread depth · 044; check 8.5 versus 10.5 mm depth
  • 1128 350 0813 — Tank housingSame number, changed collar screws · 044; inspect actual screw projection

Conditional replacement · 044

044 automatic choke: serial table has a production exception

C3M-S12B replaces earlier automatic-choke carburetors, but S21 production continues temporarily. Replacing S12A requires a compensator-compatible filter or a separately ordered non-compensator end cover.

  • Column A up to X 26 452 475 lists C3M-S12A 1128 120 0603. Column B from X 26 452 476 to X 28 047 977 lists C3M-S21 1128 120 0609. Column C from X 28 047 978 lists C3M-S12B 1128 120 0615 with an explicit note.
  • The note says automatic-choke saws will still be built for a while with C3M-S21; C3M-S12B is already being shipped as a replacement unit. Therefore X 28 047 978 is not a guaranteed automatic-choke production cutoff. No end serial for the exception is supplied.
  • When replacing S12A 1128 120 0603 with S12B 1128 120 0615, either install an air filter with compensator connection OR replace the supplied compensator end cover with 1125 121 0803 without a compensator connection. The latter must be ordered separately.
  • The A/C idle-system relationship and B-to-C component roster apply to the named configuration, not an automatic conversion of every carburetor. The source summary marks old S21 as no longer supplied from the factory, while the narrative preserves temporary production use; these are different supply contexts.
  • TI54/1992, referenced for earlier A-to-B changes, is absent from the retained corpus. This is not replaced by an inferred generic conversion procedure.
  • TI16/1994 is dated March 21, 1994. Historical availability and production statements are not present inventory or verified physical interchange; no successor-model applicability is inferred.

Source: TI 16/1994, p. 3 · TI 16/1994, p. 4 — Automatic-choke table row, column-C note and service note.

Part numbers (4)
  • 1128 120 0603 — Automatic-choke C3M-S12AHistorical version · 044 configuration described in this record
  • 1128 120 0609 — Automatic-choke C3M-S21Historical version · 044 configuration described in this record
  • 1128 120 0615 — Automatic-choke C3M-S12BHistorical version · 044 configuration described in this record
  • 1125 121 0803 — End cover without compensator connectionHistorical version · 044 configuration described in this record

Historical fitment · 044 / 066 / 084

044 / 066 / 084: foam required with the shared HD filter

TI 46/1995 explicitly requires foam 1124 124 0804 on 044, 066 and 084, unlike 046.

Later reviewed guidance: 044 / 064 / 066 / 084: dry HD filter requires inner foam · 066 new filter system: winter mesh, dry HD and foam scope

  • The stated HD assembly 0000 120 1650 was introduced for 044 in TI 20/1995, 066 in TI 10/1995 and 084 in TI 18/1995. Those model names are explicit; no automatic expansion to 064, 088, MS 440, MS 660 or MS 880 is made.
  • The foam is necessary for 044, 066 and 084 but not required for 046; it remains in the shared package. Package contents alone do not determine installation on a specific model.
  • The separate model-specific instruction sheet remains unavailable in the reviewed sources. TI 10/1995 and TI 18/1995 exist in the retained queue but are not declared reviewed by this comparison.

Source: TI 46/1995, p. 10 — 5.1.3: other-model scope of shared HD filter.

Part numbers (2)
  • 0000 120 1650 — HD filter assemblyShared assembly · 044, 066, 084 with foam
  • 1124 124 0804 — Foam elementRequired on named models · 044, 066, 084; not the 046 requirement

Historical fitment · 044 / 064 / 066 / 084

044 / 064 / 066 / 084: dry HD filter requires inner foam

Dry fleece replacement, cleaning and model-specific foam rule.

Later reviewed guidance: 066 new filter system: winter mesh, dry HD and foam scope

  • Dry fleece HD filter 0000 120 1652 replaces oil-impregnated HD filter 0000 120 1650. The new filter carries the crossed-out OIL pictogram and does not need oil impregnation. This is not a blanket no-oil rule for the original filter or unrelated filter materials.
  • When cutting power noticeably drops, clean felt prefilter 0000 141 0300. After several prefilter cleanings, or if power remains low with a clean prefilter, remove the felt prefilter and clean the HD filter; carefully blow from the clean-air side if possible. On 044/064/066/084 also remove inner foam 0000 124 0800 for cleaning.
  • For stubborn dirt or caked fleece, wash filter parts in a clean non-flammable solution, such as warm soapy water. No air-pressure value, solvent recipe, drying duration or oiling step is supplied by this bulletin.
  • Fine trapped dirt may remain after cleaning and shorten cleaning intervals with extended use. Replace the filter when those intervals are no longer practical, or if thorough cleaning after long operation still leaves a noticeable cutting-power loss. No fixed service-hour limit or diagnosis excluding other causes is established.
  • Introduction is in progress, without a numeric cutoff. Original filter 0000 120 1650 was no longer supplied by the factory in this historical source, not a present stock assertion. An included instruction sheet is mentioned but is not reproduced or claimed reviewed here; the printed bulletin procedures above stand on their own.
  • Inner foam element 0000 124 0800 is included in the supplied HD filter and is required for 044, 064, 066 and 084. Refit the applicable inner foam after cleaning; the 046/088 removal rule does not apply to these models.
  • No later MS-model, every air-filter system or physical interchange claim is inferred from the shared part number.

Source: TI 43/1996, p. 1 · TI 43/1996, p. 2 — Both complete pages: dry fleece identification, cleaning, service life, installation and supply summary.

Part numbers (4)
  • 0000 120 1650 — Oil-impregnated HD air filterOriginal · 044 / 064 / 066 / 084
  • 0000 120 1652 — Dry fleece HD air filterReplacement · 044 / 064 / 066 / 084
  • 0000 141 0300 — Felt prefilterCleaning subject · 044 / 064 / 066 / 084
  • 0000 124 0800 — Inner foam elementRequired · 044 / 064 / 066 / 084

Wrong number or missing part for the 044? Report a correction →