Stihl 1125 · Section F · 6 of 19 · 24 parts
Ignition system
Fits 034.
Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.
Parts (24)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1125 400 1202 | Flywheel Fitment / change note → | 1 |
| 2 | 1125 400 1200 | Flywheel → replaced by 1125 400 1203 TI 8/2000 | 1 |
| 3 | 0000 955 0802 | Collar nut M8x1 | 1 |
| 4 | 0000 400 1300 | Ignition module Fitment / change note → → replaced by 1122 400 1311, 0000 400 1305, 0000 400 1305 TI 51/1994 | 1 |
| 5 | not sold separately | Ignition lead 195 mm | 1 |
| 6 | 0000 989 1010 | Grommet | 1 |
| 7 | 0000 448 1250 | Lead retainer | 1 |
| 8 | 1125 440 1100 | Short circuit wire 270 mm / 10.6'' | 1 |
| 9 | 1119 442 7000 | Contact sleeve no longer available from factory | 1 |
| 10 | 0751 030 8957 | Terminal socket 4.8-1/0.8 no longer available from factory | 1 |
| 11 | 1117 442 0905 | Insulating hose 110 mm / 4.3'' | 1 |
| 12 | 1125 442 0400 | Insulating hose 120 mm / 4.7'' | 1 |
| 13 | 1125 440 2200 | Ground wire | 1 |
| 14 | 0751 030 8969 | Terminal socket A5-1.5 no longer available from factory | 1 |
| 15 | 1110 442 7000 NLA | Contact sleeve no longer available from factory | 1 |
| 16 | 1125 123 7500 | Grommet | 1 |
| 17 | 1125 084 8900 | Grommet | 1 |
| 18 | 9022 341 1019 | Spline screw IS-M5x20 | 2 |
| 20 | 0000 998 0604 | Torsion spring Fitment / change note → | 1 |
| 21 | 1128 405 1000 | Spark plug boot Fitment / change note → | 1 |
| 22 | 0000 998 0603 | Torsion spring Fitment / change note → → replaced by 0000 998 0604 TI 30/1995 | 1 |
| 23 | 1106 405 1000 | Spark plug boot Fitment / change note → → replaced by 1128 405 1000, 1128 405 1000 TI 30/1995 | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 405 0600 NLA | Ignition lead 1 m option | 1 |
| — | 0000 930 2251 | Ignition lead 10 m option | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · 024 / 026 / 028 / 029 / 034 / 036 / 038 / 039 / 048
024–048 listed saws: aluminium-flywheel ignition module split
024, 026, 028, 029, 034, 036, 038, 039 and 048 use optimized 0000 400 1300, not the former universal 1305 recommendation.
- Applies only to the explicitly named 024, 026, 028, 029, 034, 036, 038, 039 and 048 aluminium-flywheel saws. The 044 and restricted 064 branches are separate records; a numeric span in the title does not include unnamed models.
- The reactivated 0000 400 1300 number identifies the optimized aluminium-flywheel module here. The modified version has an integrated 400 mm (15 3/4 inch) ignition lead, no separate ignition lead and no short-circuit wire. The reused number alone does not distinguish all older constructions.
- Only 0000 400 1300 is recommended for these machines. The permission to use existing 0000 400 1305 stock belongs to 046/066, not these models. No machine-number limit is supplied for these nine saws.
- TI22/1998 reports isolated reliability problems with the former universal module on aluminium-flywheel machines. Different timing requirements led to two optimized modules; this is historical manufacturer field-test guidance, not a project hardware test.
- Order only 0000 400 1300 or 1122 400 1314 according to the named model and restrictions. There is no automatic one-number replacement for 0000 400 1305.
- The 02.98 microfiche/CD-ROM issue documents the future part numbers. Both summary rows say the original 0000 400 1305 is no longer available from the factory; that does not revoke the expressly permitted use of existing stocks on eligible 046/066 machines.
- Introduction is in progress, without a new production cutoff. Factory availability is a 1998 statement, not current stock or proof of physical interchange.
Source: TI 22/1998, p. 1 · TI 22/1998, p. 2 — Sections 1–6: history, split, service note and ordering.
Part numbers (2)
- 0000 400 1305 — Former universal ignition moduleEarlier recommendation · Named saws; superseded by model-specific guidance
- 0000 400 1300 — Optimized aluminium-flywheel ignition moduleLater replacement · Only the nine explicitly named saw models
Historical fitment · 034
034: series 1125 replacement ignition assignment
0000 400 1300 and the listed flywheel pairing for series 1125; 195 mm ignition lead.
- Listed configuration: 0000 400 1300 with flywheel 1125 400 1202.
- Printed ignition-lead length: 195 mm (7 3/4 in). Preserve the printed metric and inch values; no rounding correction is inferred.
- TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
- Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
- Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
- Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
- Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.
Source: TI 1/1999, p. 1 · TI 1/1999, p. 2 — 1.1 general restrictions and 1.2.1 chainsaw assignments.
Part numbers (2)
- 0000 400 1300 — Replacement ignition moduleAssigned replacement · 034, series 1125, only with the listed flywheel branch
- 1125 400 1202 — Listed configuration flywheelRequired pairing · 034, series 1125; listed configuration only
Service note · 034 / 036
034 / 036 spark-plug terminal and leg spring change
New terminal improves ignition-lead retention; introduction in progress.
- ALSO FOR STIHL 034: spark plug terminal 1106 405 1000 is replaced by 1128 405 1000 to improve security of the ignition lead. Included leg spring 0000 998 0603 is replaced by 0000 998 0604. Keep terminal-and-included-spring generations paired; this TI does not endorse mixed spring/terminal combinations.
- Introduction IN PROGRESS, no numeric cutoff. BOTH original terminal and original spring REMAIN AVAILABLE AS SPARES FOR OLDER MACHINES; deletion from new production does not mean all old parts must be discarded.
- Later 034 F and 036 F retain both generations. Footer July7,1995 and prior TI28.95 are bibliographic, not the introduction date/serial. The page1 contents also lists section4 Combination wrench, but no section4 appears in the retained eight-page PDF; no wrench specification or ordering number is inferred.
- Historical TI guidance for the named models and stated versions only. Shared series and later IPL sheets do not extend applicability to other variants or successors. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.
Source: TI 30/1995, p. 8 — Section 3 complete summary, remarks and footer.
Part numbers (4)
- 1106 405 1000 — Original spark-plug terminalolder-machine spare · 034 / 036; Section 3 complete summary, remarks and footer
- 1128 405 1000 — New spark-plug terminalimproved lead retention · 034 / 036; Section 3 complete summary, remarks and footer
- 0000 998 0603 — Original leg springincluded with original terminal · 034 / 036; Section 3 complete summary, remarks and footer
- 0000 998 0604 — New leg springincluded with new terminal · 034 / 036; Section 3 complete summary, remarks and footer
Conditional replacement · 034 / 036
034 / 036: ignition module 1300 replaced by 1305
New ignition module may be used on older machines; later catalog retention of 1300 remains visible.
in progress — Ignition-module introduction only; no serial supplied; older-machine use expressly permitted.
- Original UNIVERSAL ignition module 0000 400 1300 is replaced by 0000 400 1305 for this 034/036 bulletin. The adjective universal describes the original part; it does NOT establish compatibility across all STIHL models or all ignition systems.
- New module CAN ALSO BE USED FOR OLDER MACHINES. Section 3 introduction is IN PROGRESS with NO SERIAL CUTOFF; the tank-only X 39 108 850 does not apply. The one-row summary says original 0000 400 1300 is NO LONGER AVAILABLE FROM FACTORY. This is historical availability, not current stock or an instruction to remove a functioning module.
- Exact 034 and 036 ignition IPLs still list 0000 400 1300. That later-catalog versus TI replacement/availability tension is explicit and unresolved; neither source is overwritten. TI 11 gives no timing curve, air gap, flywheel interchange, wiring modification or installation procedure. Footer last TI43.97, copyright 1998 and documentation 6255 are bibliographic context, not a delegated repair dependency.
- Historical TI 11/1998, models 034/036, series 1125; QS is included only where the tank section expressly names it. Shared parts do not extend these changes to MS 360 or other models. Factory supply statements are historical, not current availability. Source-stated replacement permission is not physical-fit verification. No hardware operation was performed.
Source: TI 11/1998, p. 3 — Section 3 complete prose, summary row, in-progress introduction, availability remark and footer.
Part numbers (2)
- 0000 400 1300 — Original universal ignition moduleTI: no longer available; retained in later exact-model IPLs · 034/036; exact variants and conditions in this note
- 0000 400 1305 — Replacement ignition moduleAlso usable on older 034/036 machines per TI · 034/036; exact variants and conditions in this note
Wrong number or missing part for the 034? Report a correction →