Stihl 1125 · Section L · 4 of 8 · 39 parts
Pickup body, Air filter
Fits 036 QS.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (39)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | not sold separately | Hose 3.1x6.7x102 mm not available as a separate item | 1 |
| 2 | 1127 358 7703 | Hose | 1 |
| 3 | 1119 358 7701 | Hose | 1 |
| 4 | 0000 350 3504 | Pickup body | 1 |
| 5 | 1119 121 8600 | Washer | 1 |
| 6 | 1119 141 1800 | Sleeve | 1 |
| 7 | 1125 141 2200 | Manifold | 1 |
| 8 | 9771 021 2580 | Hose clip Ø 34x7 | 1 |
| 9 | 1125 120 0613 | Carburetor C3A-S31E | 1 |
| 10 | 1125 123 7506 | Grommet | 1 |
| 11 | 1125 120 0615 | Carburetor C3A-S39B | 1 |
| 12 | 1125 123 7501 | Grommet | 1 |
| 13 | 9210 260 0700 | Hexagon nut M5 | 2 |
| 14 | 1125 120 1602 | Air filter | 1 |
| 15 | 1125 121 9100 | Bushing | 1 |
| 16 | 1125 120 1607 | Air filter | 1 |
| 17 | 1125 122 4900 | Filter insert | 1 |
| 18 | 1125 141 8300 | Slotted nut | 2 |
| 19 | 1125 120 1617 | Air filter, fleece | 1 |
| 20 | 1125 120 1622 | Air filter, fleece | 1 |
| 22 | 1121 141 2900 | Cover | 1 |
| 23 | not sold separately | Twist lock | 1 |
| 24 | 1125 121 7700 | Guide piece | 1 |
| 25 | 1125 121 7701 | Guide piece | 1 |
| 26 | 1125 084 8203 | Cover plate option | 1 |
| 27 | 1125 084 8202 NLA | Cover plate option | 1 |
| 28 | 9041 216 0650 | Pan head screw M4x10 option | 2 |
| 29 | 1125 140 1907 NLA | Carburetor box cover → replaced by 1125 007 1024 TI 44/2002 option | 1 |
| 30 | 9438 929 4040 NLA | Blind rivet 5x8 option | 7 |
| 31 | 1125 084 8201 NLA | Cover plate option | 1 |
| 32 | 9099 021 2360 | Self-tapping screw 3.5x9.5 option | 2 |
| 33 | 0000 967 3605 | Warning pictogram Filler cap | 1 |
| 34 | 0000 967 3692 | Warning pictogram Filler cap | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 930 2804 | Hose 3.1x6.7 mm x 1 m not illustratedoption | 1 |
| — | 1125 120 1612 | Air filter | 1 |
| — | 1125 120 1626 | Air filter, fleece | 1 |
| — | 1125 007 1012 | Intake air preheating kit option | 1 |
| — | 1125 007 1042 NLA | Intake air preheating kit option | 1 |
| — | 1125 007 1037 NLA | Intake air preheating kit option | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 036 QS
036 QS: brake-interlock free-travel check and adjustment
The QS check requires a slack brake cable, a snug band at points A and interlock travel within marked range B. Clockwise adjustment reduces free travel; counterclockwise increases it.
- TI31/1999 explicitly covers model 036 QS, series 1125. The exact QS clutch/chain-brake and pickup-body/air-filter assemblies are linked for this service context only; ordinary 036/034, later MS variants and replacement-part interchange are not inferred. No part numbers or production changeover are specified.
- Section 1 preparations: pull the hand guard toward the front handle to release the chain brake; release/remove the hexagon nuts and chain sprocket cover; remove the bar and chain. Remove screw(1), side plate(2), spline socket head screws(3) and cover(4), following drawing 148TI012 KN. Illustration numbers are local callouts, not catalog part numbers or IPL positions.
- With the brake off, the brake cable(5) must hang loosely in the crankcase, with no tension (148TI013 KN). Press interlock lever(6) down all the way and hold it there (148TI014 KN). In that condition, brake band(7) must locate snugly, with no play, against the crankcase points marked A in 148TI015 KN. Do not replace these separate cable/band requirements with a generic cable-tension adjustment.
- Release interlock lever(6), then press it down slowly to check free travel. Travel must be within range B marked on the front end of the lever in 148TI016 KN; the brake band’s brake lever must not move during that free travel. The source supplies a graphical/marked range, not a millimeter or angle value. Do not measure the scan to invent a clearance. Adjust as necessary using section 2.
- Section 2 access: release twist lock(1) and remove carburetor box cover(2) (148TI017 KN); release/remove slotted nuts(3) and air filter(4) (148TI018 KN). The section 2 callouts restart independently: they are not the section 1 side-plate screw, cover or interlock lever.
- Loosen clamp screw(5), then use a 6 mm open-end wrench on adjusting nut(6), as shown in 148TI019 KN. Turn the nut clockwise (right) to reduce free travel or counterclockwise (left) to increase it. The 6 mm value is wrench size, not the amount of free travel or a thread dimension. Section 2 nut(6) is not section 1 interlock lever(6).
- Lock the adjusting nut in position with clamp screw(5). Reassemble all parts in the reverse sequence. The bulletin supplies no numeric clamp-screw torque, turn count, braking-time acceptance value or complete post-repair safety test; none is fabricated from the illustration or transferred from another model.
- The final line identifies TI05/1999 as the previous Technical Information on 036 QS; it is a chronology pointer, not an instruction to replace this adjustment with an earlier procedure. Its already-recorded source gaps/conflicts remain unchanged. No additional delegated procedure is required by TI31’s text. This note records historical source instructions only: no brake adjustment, machine operation or repair acceptance was performed.
Source: TI 31/1999, p. 1 · TI 31/1999, p. 2 · TI 31/1999, p. 3 — Complete sections 1–2 across pages 1–3: preparations, cable slack, band points A, marked free-travel range B, adjustment and reassembly; drawings 148TI012–019 KN.
No additional parts-table entry added.
Wrong number or missing part for the 036 QS? Report a correction →