Stihl 1125 · Section K · 3 of 8 · 35 parts
Tank housing, AV-System
Fits 036 QS.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (35)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1125 350 0819 | Tank housing | 1 |
| 2 | 1125 350 0812 | Tank housing Fitment / change note → | 1 |
| 3 | 0000 989 0602 | Grommet | 1 |
| 4 | 4116 122 6600 | Collar screw | 2 |
| 5 | 1125 967 3419 | Warning pictogram QS | 1 |
| 6 | 0000 350 5800 | Tank vent → replaced by 0000 350 5804 TI 41/2003 | 1 |
| 7 | not sold separately | O-ring not available as a separate item | 1 |
| 8 | 1121 350 5802 | Tank vent → replaced by 0000 350 5800, 0000 350 5800 TI 31/2001 | 1 |
| 9 | 1120 358 8105 | Vent insert | 1 |
| 10 | 9099 021 2770 | Self-tapping screw 3.9x13 | 1 |
| 11 | 1110 353 1600 | Valve Fitment / change note → | 1 |
| 12 | 1122 358 1800 | Filter | 1 |
| 13 | 1121 358 1800 | Filter Fitment / change note → → replaced by 1122 358 1800 TI 31/2000 | 1 |
| 14 | 1121 358 2500 | Cap Fitment / change note → | 1 |
| 15 | 0000 350 0525 | Filler cap | 1 |
| 16 | 9645 948 7734 | O-ring 25x3.5 | 1 |
| 17 | 0000 350 0520 | Filler cap → replaced by 1127 350 0500 TI 48/1995 | 1 |
| 18 | 0000 359 1220 | Sealing ring | 1 |
| 19 | 0000 350 0900 | Rope | 1 |
| 20 | 0000 353 0600 | Hook | 1 |
| 21 | 1125 790 9904 | Annular buffer 1125/04 | 2 |
| 21 | 1125 790 9910 | Annular buffer 1125/10 | 2 |
| 21 | 1125 790 9906 | Annular buffer 1125/06 | 2 |
| 22 | 1125 790 9906 | Annular buffer 1125/06 | 1 |
| 22 | 1125 790 9904 | Annular buffer 1125/04 | 1 |
| 23 | 9074 478 4435 | Pan head self-tapping screw IS-P6x19 | 2 |
| 24 | 1125 791 2805 | Stop buffer | 1 |
| 25 | 1125 791 6200 | Screw | 2 |
| 26 | 1125 791 7306 | Plug | 2 |
| 27 | 1125 791 7300 | Plug | 1 |
| 28 | 1119 656 7705 | Chain catcher → replaced by 1125 650 7700 TI 10/2002 | 1 |
| 29 | 0000 967 3500 NLA | Instruction label | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | not sold separately | AV system normal: | |
| — | not sold separately | AV system hard: | |
| — | not sold separately | AV system soft: | |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · 034 / 036 / 036 QS
034 / 036: revised tank vent and S-shaped fuel hose
Same-number tank housings; standard 036 cutoff, deferred heated/QS rollout and temporary hose inclusion remain distinct.
X 39 108 850 — Page 2 specifies standard 036; page 1 says all versions, while heated/QS production is deferred. Conflict retained; no universal serial selector or restriction on stated replacement use.
- Page 1 says the modified tank housing enters ALL VERSIONS from X 39 108 850, but the page 2 summary explicitly says STANDARD 036 and its Note defers HEATED HANDLE AND QS versions to a LATER DATE. This is a retained internal scope conflict, not a universal 034/036/QS serial range. No separate 034 production date or delayed-variant serial is supplied. The new tank housing MAY BE USED FOR REPLACEMENT PURPOSES on those deferred versions; production timing is not a repair prohibition.
- Tank housing 1125 350 0813 and handle-heating housing 1125 350 0812 each keep the SAME ORDER NUMBER in original/new columns. Both include summary items 2–5. Remark 1 says ONLY MODIFIED VERSIONS are available from the factory; the order number alone cannot distinguish old and modified housings.
- The original valve 4114 353 1600 permits air both INTO AND OUT OF the fuel tank. New mushroom valve 1110 353 1600 permits air IN ONLY. Drawings 145TI016 KN (original left, new right) and 145TI017 KN show the changed valve and inward airflow as fuel consumption lowers tank pressure and opens the mushroom valve to equalize with atmosphere. The printed phrase “two-valve valve” is retained as source wording, not a claim of two separate replaceable valves.
- IMPORTANT source instruction: heat or sunlight can still produce POSITIVE PRESSURE in the fuel tank. ALWAYS OPEN THE FILLER CAP SLOWLY to release excess pressure gradually and avoid fuel spills. The new inlet-only valve is not a pressure-relief outlet. No drilling dimensions, vent test pressure or valve-only retrofit into an original housing is established.
- S-shaped intake hose 1127 358 7705 replaces straight hose 1119 358 7700 and REQUIRES A LARGER OPENING in the tank housing. Replacement housings also have that opening. Page 2 says supplied with the new hose for ABOUT THE NEXT 2 YEARS; summary remark 2 specifies inclusion with item 1 UP TO THE END OF 1999. These are historical supply limits, not a present-day kit-content promise or permission to enlarge an old tank by an invented procedure.
- Summary item 3 filter 1121 358 1800 and item 4 cap 1121 358 2500 are UNCHANGED inclusions; the cap is the listed vent component, not an invented replacement fuel filler cap. Item 5 valve changes to 1110 353 1600. Original valve 4114 353 1600 REMAINS AVAILABLE FOR OTHER MODELS (remark 3) AND OLDER MACHINES (remark 4); original straight hose 1119 358 7700 REMAINS AVAILABLE FOR OLDER MACHINES (remark 4). Dashes in the hose columns do not override these explicit supply remarks.
- Exact 034/036 tank IPLs retain valve 1110 353 1600, filter 1121 358 1800 and cap 1121 358 2500; the QS tank sheet also retains housing 1125 350 0812. Later catalog tank 0818/0819 and hose 7701/7703 entries differ from this TI and do not establish a supersession chain for 0813 or 7705. The 036 IPL also retains original valve 4114 353 1600. All catalog rows and the conflicting rollout statements remain unchanged.
- Historical TI 11/1998, models 034/036, series 1125; QS is included only where the tank section expressly names it. Shared parts do not extend these changes to MS 360 or other models. Factory supply statements are historical, not current availability. Source-stated replacement permission is not physical-fit verification. No hardware operation was performed.
Source: TI 11/1998, p. 1 · TI 11/1998, p. 2 — Section 1 complete pages 1–2: drawings 145TI016/017 KN, function and Important warning; hose/variant Note; seven summary rows and all four remarks.
Part numbers (8)
- 1125 350 0813 — Tank housing; same order numberModified version only; includes items 2–5 · 034/036; exact variants and conditions in this note
- 1125 350 0812 — Handle-heating tank housing; same order numberModified version only; deferred production, replacement permitted · 034/036; exact variants and conditions in this note
- 1127 358 7705 — S-shaped fuel intake hoseLarger tank opening required; housing inclusion through end 1999 · 034/036; exact variants and conditions in this note
- 1119 358 7700 — Original straight intake hoseRemains available for older machines · 034/036; exact variants and conditions in this note
- 1121 358 1800 — FilterUnchanged housing inclusion item 3 · 034/036; exact variants and conditions in this note
- 1121 358 2500 — CapUnchanged housing inclusion item 4 · 034/036; exact variants and conditions in this note
- 4114 353 1600 — Original bidirectional valveRemains available for other models and older machines · 034/036; exact variants and conditions in this note
- 1110 353 1600 — Inlet-only mushroom valveModified housing valve item 5 · 034/036; exact variants and conditions in this note
Wrong number or missing part for the 036 QS? Report a correction →