Stihl 1128 · Section G · 7 of 17 · 27 parts
Rewind starter
Fits 044.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (27)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1128 080 1812 | Fan housing | 1 |
| 2 | 0000 967 2035 | Nameplate STIHL | 1 |
| 4 | 1110 084 9102 | Bushing | 1 |
| 5 | 0000 958 0607 | Washer | 1 |
| 6 | 9416 868 6530 | Hollow rivet 6.5x0.5x6.8 | 1 |
| 7 | 1128 080 6500 | Axle | 1 |
| 9 | 1129 190 0601 | Rewind spring | 1 |
| 10 | 1128 195 0400 | Rope rotor | 1 |
| 11 | 1128 190 3400 | Starter grip ElastoStart Ø 3,5 mm | 1 |
| 12 | 1128 190 2900 | Starter rope Ø 3.5 mm | 1 |
| 13 | 1125 195 7200 | Pawl | 2 |
| 14 | 0000 958 0923 | Washer | 1 |
| 15 | 1128 195 3500 | Spring | 1 |
| 16 | 1128 084 7801 | Segment | 1 |
| 17 | 9022 313 0660 | Spline screw IS-M4x12 | 2 |
| 18 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 3 |
| 19 | 1128 080 7500 NLA | Cover plate option | 1 |
| 20 | 9022 313 0660 | Spline screw IS-M4x12 option | 2 |
| 40 | 1121 195 3400 | Starter grip | 1 |
| 41 | 1113 195 8200 | Starter rope Ø 3.5x960 mm | 1 |
| 42 | 0000 974 1000 | Round head rivet 3x6 | 2 |
| 43 | 9416 868 5630 | Hollow rivet 5.5x0.5x6.8 | 4 |
| 44 | 0000 958 0514 | Washer | 1 |
| 45 | 9022 313 0680 | Spline screw IS-M4x16 | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1128 080 2104 | Fan housing with rewind starter Fitment / change note → | 1 |
| — | 0000 930 2267 | Starter rope Ø 3.5 mm / 28 pieces not illustratedoption | 1 |
| — | 0000 930 2203 | Starter rope Ø 3.5 mm x 30.5 m not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
IPL correction · 044
044 rewind starter: spring-number conflict and revised post torque
Page6 says the rewind-spring number remains unchanged, but page7 lists 1128 190 0600 → 1129 190 0600. Both statements are preserved; the discrepancy is not resolved.
- January1994: spring housing deleted; the spring is supplied in a sheetmetal holder that can be scrapped after installation. Reduced weight, one less wearing part and service friendliness are vendor benefits, not measured results.
- Source conflict: page6 explicitly says the rewind-spring part number remains unchanged. Page7 prints old 1128 190 0600 and new 1129 190 0600. Do not treat either sentence alone as a verified interchange instruction or silently choose a corrected number. A corrective source is needed.
- Fan housing with rewind starter remains 1128 080 2104 in both summary columns and includes the spring. Unmodified versions are while-stocks-last; introduction is in progress. The January housing deletion date is not a verified date for every listed part-number change.
- Section6.2 increases the starter-post tightening torque in the fan housing from 9.5 to 11.5 Nm (7.0 to 8.5 lbf.ft). This refers to the illustrated starter post only, not every starter fastener or later saw.
- The catalog currently lists rewind spring 1129 190 0601. This later number is not evidence resolving the 0600 contradiction; no undocumented supersession is inferred.
- TI16/1994 is dated March 21, 1994. Historical availability and production statements are not present inventory or verified physical interchange; no successor-model applicability is inferred.
Source: TI 16/1994, p. 6 · TI 16/1994, p. 7 — Sections6.1–6.3, spring drawing, post torque and conflicting summary.
Part numbers (3)
- 1128 080 2104 — Fan housing with rewind starterUnchanged assembly number · 044 configuration described in this record
- 1128 190 0600 — Original rewind spring, table entrySource conflict · 044 configuration described in this record
- 1129 190 0600 — New rewind spring, table entrySource conflict · 044 configuration described in this record
Wrong number or missing part for the 044? Report a correction →