Stihl 1128 · Section C · 3 of 13 · 32 parts
Oil pump, Clutch
Fits MS 440.
Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.
Parts (32)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1128 640 3205 | Oil pump | 1 |
| 2 | 0000 958 0518 | Washer | 2 |
| 3 | 0000 997 0615 | Compression spring | 1 |
| 4 | 1128 647 0605 | Pump piston | 1 |
| 5 | 1128 647 4806 | Control bolt | 1 |
| 6 | 9380 620 1090 | Roll pin 2x10 | 1 |
| 7 | 9646 945 0160 | O-ring 4x2 | 2 |
| 8 | 9646 951 0155 | O-ring 4x1.5 | 1 |
| 9 | 1128 647 7000 | Plug | 1 |
| 10 | 9022 313 0660 | Spline screw IS-M4x12 | 2 |
| 11 | 1128 647 6600 | Bearing spacer | 1 |
| 12 | 1128 640 7112 | Worm | 1 |
| 13 | 1128 647 2400 | Spring | 1 |
| 14 | 1128 162 1001 | Cover washer 58 mm / 2 5/16'' Fitment / change note → | 1 |
| 15 | 1128 162 1000 | Cover washer 43 mm / 1 3/4'' Fitment / change note → → replaced by 1128 162 1001, 1128 162 1001 TI 37/2001 | 1 |
| 16 | 1128 162 3202 | Carrier | 1 |
| 17 | 1128 162 0807 | Clutch shoe Fitment / change note → | 3 |
| 18 | 1128 162 3000 | Retainer | 3 |
| 19 | 0000 997 5815 | Tension spring | 3 |
| 20 | 9512 933 2380 | Needle cage 10x16x12 → replaced by 9512 933 2382, 1122 967 1503 TI 53/2002 | 1 |
| 21 | 1128 640 2000 NLA | Chain sprocket 3/8" 7T | 1 |
| 22 | 1128 640 2005 | Chain sprocket 3/8" 8T option | 1 |
| 23 | 0000 958 1021 | Washer Ø 33 mm | 1 |
| 25 | 0000 642 1223 | Rim sprocket 3/8" 7T | 1 |
| 26 | not sold separately | Clutch drum not available as a separate item | 1 |
| 27 | 0000 958 1032 | Washer Ø 27 mm | 1 |
| 28 | 0000 642 1216 | Rim sprocket 3/8" 8T option | 1 |
| 29 | 0000 642 1239 NLA | Rim sprocket 0.325" 9T option | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1128 160 2004 | Clutch Fitment / change note → | 1 |
| — | 1128 007 1000 | Rim sprocket kit 3/8" 7T | 1 |
| — | 1128 007 1001 | Rim sprocket kit 3/8" 8T option | 1 |
| — | 1128 007 1011 | Rim sprocket kit 0.325" 9T option | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · MS 440
MS 440 introduction: clutch and shoe revision
The transition pairs clutch 1128 160 2001 with shoes 1128 162 0806.
Later reviewed guidance: MS 440 / MS 460: larger cover washer requires newer clutch shoes
- The new clutch/shoe combination is 1128 160 2001 with 1128 162 0806. It follows the predecessor clutch 1128 160 2000 with shoes 1128 162 0800.
- This does not establish mixed old/new shoe-and-carrier compatibility, nor does it replace the later clutch shown in the current IPL.
- The page 4 clutch row says including item 9, referring to itself. The pairing above comes from explicit page 3 prose; kit contents are not inferred from that erroneous reference.
- Later TI 37/2001 adds a cover-washer/shoe compatibility requirement and orientation instruction; read the linked later guidance before selecting the washer.
- Introduction is in progress without a numeric serial cutoff; retained edition is english / USA. Historical factory-availability remarks are not current stock information.
- Summary items 9 and 10 both carry remark 1: the previous clutch and previous shoe are no longer available from the factory. The self-referential including item 9 remains a source error; do not silently change it to item 10 or infer kit contents from it.
- Section 8 announces a separate illustrated parts list and its inclusion in the 01.2001 microfiche/CD-ROM issue. This bibliographic statement does not establish exact edition equivalence with the current catalog overlay.
Source: TI 6/2001, p. 1 · TI 6/2001, p. 2 · TI 6/2001, p. 3 · TI 6/2001, p. 4 — Complete sections 1–9: 044/MS440 naming and power chronology, split-filter intake, cap operation, matching assemblies, vent construction/function, main bearing, clutch and all 17 summary rows.
Part numbers (4)
- 1128 160 2001 — ClutchIntroduction configuration · MS 440 with shoes 1128 162 0806
- 1128 162 0806 — Clutch shoeMatched introduction component · MS 440 clutch 1128 160 2001
- 1128 160 2000 — ClutchPrevious paired configuration · MS 440 transition predecessor; not a mixed-generation fitment
- 1128 162 0800 — Clutch shoePrevious paired configuration · MS 440 transition predecessor; not a mixed-generation fitment
Conditional replacement · MS 440 / MS 460
MS 440 / MS 460: larger cover washer requires newer clutch shoes
The 58 mm cover washer is conditional on the revised shoes, not a direct washer-only replacement for the older clutch.
- New cover washer 1128 162 1001 (58 mm outside diameter) may only be installed with new clutch shoes 1128 162 0806.
- Previous washer 1128 162 1000 (43 mm) is described as remaining available for older machines and clutch 1128 160 2000 with shoes 1128 162 0800 in this historical TI; this is not a current stock statement.
- The revised clutch is 1128 160 2001 with three shoes 1128 162 0806. Its shoe shoulders provide clearance for the larger washer.
- The word TOP on the washer must face the clutch. Introduction is in progress; no numeric cutoff is supplied.
- This reviewed USA-edition note names MS 440 and MS 460. It does not establish a universal older 044/046 conversion.
- The larger washer further shields the oil pump and helps protect the crankcase and oil pump from consequential damage if a clutch spring breaks. This is a stated protective purpose, not a guarantee against all damage or a remedy for a failed clutch.
- Drawing 176TI008 KN compares the previous 43 mm (1.693 in.) washer at left with the new 58 mm (2.283 in.) washer at right. Drawing 176TI010 KN compares the old clutch shoe at left with the shouldered new shoe at right; arrows identify the revised contour for clearance. No shoe machining dimensions or modification procedure are supplied.
- Summary item 2 includes item 3: clutch assembly with three clutch shoes. All three rows carry remark 1: the previous washer, clutch assembly and shoes remain available as spares for older machines according to this TI. Availability is historical, not a present ordering promise.
- Historical supply discrepancy remains unresolved: TI37/2001 says the old clutch 1128 160 2000 and shoes 1128 162 0800 remain available, while TI05/2001 (MS460) and TI06/2001 (MS440) mark those previous parts no longer available from the factory. These edition statements are retained without inventing a universal stock chronology. They do not relax the new-washer/new-shoe restriction.
Source: TI 37/2001, p. 1 · TI 37/2001, p. 2 — Complete cover-washer purpose, diagrams, parts availability, TOP service note and all three summary rows.
Part numbers (6)
- 1128 162 1000 — 43 mm cover washerPrevious configuration · Older clutch 1128 160 2000 / shoes 1128 162 0800
- 1128 162 1001 — 58 mm cover washerConditional replacement · Only with shoes 1128 162 0806
- 1128 160 2000 — Clutch assemblyPrevious configuration · MS 440 / MS 460 older assembly
- 1128 160 2001 — Clutch assemblyRevised configuration · MS 440 / MS 460 with new shoes
- 1128 162 0800 — Clutch shoePrevious version · Older clutch; old cover washer
- 1128 162 0806 — Clutch shoeRequired companion; three · Required for larger cover washer
Service note · MS 440 / MS 460 / MS 361 / MS 361 C
MS 440, MS 460 and MS 361 clutch change with guide strips
New complete clutch retrofits; individual shoe mixing is prohibited.
- Previous clutch 1128 160 2001 with shoes 1128 162 0806 is replaced by clutch 1128 160 2004 with shoes 1128 162 0807. Mutually engaging guide strips improve lateral guidance, reducing shoe tilt, wear between shoe and carrier, and idle noise.
- New complete clutch 1128 160 2004 may also be installed in older machines in the stated model scope. Introduction is CONTINUOUS: NO NUMERIC SERIAL CUTOFF is supplied. Other individual parts remain unchanged.
- Previous complete clutch is no longer factory-available according to the historical summary; old shoe 1128 162 0806 remains available for the previous clutch and other model series. This is 2005 supply policy, not present stock availability. Observe the separate no-mixing/pairing restriction; do not infer a single-shoe retrofit.
- Historical TI36/2005 English USA guidance only; the linked catalog sheets are navigation anchors, not proof that all later variants share these specifications. No physical interchange test was performed.
Source: TI 36/2005, p. 1 · TI 36/2005, p. 2 · TI 36/2005, p. 3 — MS 440, MS 460 and MS 361 clutch change with guide strips.
Part numbers (4)
- 1128 160 2001 — Previous clutchReplaced complete assembly · MS 440, MS 460, MS 361, MS 361 C; see note restrictions
- 1128 160 2004 — New clutchComplete assembly also fits older stated machines · MS 440, MS 460, MS 361, MS 361 C; see note restrictions
- 1128 162 0806 — Previous clutch shoeRetained for previous clutch/other series · MS 440, MS 460, MS 361, MS 361 C; see note restrictions
- 1128 162 0807 — Guide-strip clutch shoeNew design; no mixing with old shoes · MS 440, MS 460, MS 361, MS 361 C; see note restrictions
Service note · MS 440 / MS 460 / MS 361 / MS 361 C
Clutch shoe retrofit: no mixed designs; printed pairing remains ambiguous
The source says “in pairs” without giving an assembly count.
- New shoe 1128 162 0807 CANNOT BE COMBINED with previous shoe 1128 162 0806. The next sentence says new shoes can only be fitted in the previous clutch “in pairs” because of the guide strips.
- Preserve BOTH statements. The illustration shows engagement between neighboring guide strips; it does not specify a complete clutch shoe count. Do not interpret “in pairs” as permission for two new shoes plus one old shoe, silently rewrite it as a stated three-shoe set, or invent a mixed-clutch assembly procedure.
- Exact individual-shoe retrofit quantity remains unresolved in this source. The explicit complete-clutch retrofit is separate and does not depend on guessing that quantity. Old shoes remain historically available for the previous clutch and other series; availability is not permission to mix designs.
- Historical TI36/2005 English USA guidance only; the linked catalog sheets are navigation anchors, not proof that all later variants share these specifications. No physical interchange test was performed.
Source: TI 36/2005, p. 1 · TI 36/2005, p. 2 · TI 36/2005, p. 3 — Clutch shoe retrofit: no mixed designs; printed pairing remains ambiguous.
Part numbers (2)
- 1128 162 0806 — Previous shoeCannot be mixed with guide-strip shoe · MS 440, MS 460, MS 361, MS 361 C; see note restrictions
- 1128 162 0807 — Guide-strip shoePrinted pairing ambiguity; no mixed designs · MS 440, MS 460, MS 361, MS 361 C; see note restrictions
Wrong number or missing part for the MS 440? Report a correction →