← 044/046 · MS 440/460/461

Stihl 1128 · Section M · 12 of 16 · 25 parts

Shroud, Air filter

Fits MS 460.

Parts diagrams →

Historical fitment & changes (6) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516171718192202122233456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (25)

PosPart numberDescriptionQty
1 1128 080 1616 Shroud 1
2 1121 084 7100 Cap 1
3 1128 084 8301 Reflector foil 1
4 0000 963 0808 Bushing 3
5 1128 967 1513 Model plate MS 460 1
6 1122 084 7100 Cap 1
7 9022 341 0980 Spline screw IS-M5x16 3
8 1128 120 3404 Filter base Fitment / change note → → replaced by 1128 120 3406 TI 44/2000 1
8 1128 120 3406 Filter base Fitment / change note → → replaced by 1128 120 3404 TI 32/2002 1
9 1128 120 2202 Flange 1
10 9121 319 0960 Stud M5x12x9 1
11 9216 263 0700 Hexagon nut M5 → replaced by 9220 260 0701 TI 25/1994 2
12 1128 121 6900 Baffle 1
13 1128 141 6300 Air baffle 1
14 0000 120 1653 Air filter, wire mesh Fitment / change note → option 1
15 1128 140 1001 Filter cover 1
16 1128 141 4001 Slide 1
17 1124 140 9500 Twist lock Fitment / change note → 1
18 0000 140 4402 Air filter HD2 Fitment / change note → 1
19 0000 141 0300 Prefilter Fitment / change note → 1
20 0000 967 1593 Model plate Magnum 1
21 0000 140 4402 Air filter HD2 Fitment / change note → option 1
22 0000 141 0600 Prefilter Fitment / change note → option 1
23 0000 124 1000 Supporting plate Fitment / change note → option 1
Not numbered on the diagram — assemblies, kits and options
— 0000 120 1655 Air filter Fitment / change note → option 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · MS 460

MS 460 Arctic: closed-side filter base for icing reduction

TI 32/2002 selects 1128 120 3404 instead of 1128 120 3406 for MS 460 Arctic; this is not a reversal for all 046/MS 460 saws.

  • Arctic configuration only. The new base has no side openings; the previous base remains available for other models.
  • Retained catalog title limits this bulletin to Japan and Canada only. The scanned page names MS 460 Arctic but does not itself print that regional restriction; regional scope is retained conservatively, not generalized.
  • Introduction is in progress; no numeric cutoff is supplied.
  • The 1996 1128 124 3404 versus later 1128 120 3404 discrepancy remains unresolved. This 2002 source does not establish an alias or correct the earlier printed number.
  • Drawing 176TI014 KN shows previous base 1128 120 3406 at top and closed-side base 1128 120 3404 at bottom. The absence of side openings is the stated icing-risk reduction measure; it is not a guarantee against icing or an instruction to plug or machine the previous base.
  • The single summary row retains 1128 120 3406 as a spare for other models, not as the recommended new Arctic configuration. This historical availability remark is not current stock information. No temperature threshold or general operating change is specified.
  • The original page footer reads englisch / english, not english / USA. Japan/Canada remains a retained catalog-title qualifier not printed on this page; its provenance discrepancy is unresolved. The generic MS460 assembly link must be read with the Arctic-only condition, not as coverage for all MS460 variants.

Source: TI 32/2002, p. 1 — Complete filter-base prose, comparison drawing176TI014 KN, single summary row, introduction and other-model availability remark.

Part numbers (2)
  • 1128 120 3406 — Filter base with side openingsPrevious Arctic configuration · MS 460 Arctic; remains a spare for other models
  • 1128 120 3404 — Filter base without side openingsNew Arctic configuration · MS 460 Arctic; retained title scope Japan/Canada

Conditional replacement · 046 / MS 460

046 / MS 460: fine-dust filter kit and START-STOP label

Retain the installation label and the summary’s missing item 6 without inventing an order number.

  • Fine-dust filter assembly 0000 120 1655 is a special accessory for 046 and MS 460, intended to improve filtration in very dusty work areas. It is not announced as a universal replacement for all filters or assigned a serial cutoff.
  • Remove the existing filter cover and air filter. Fit prefilter 0000 141 0600 over air filter 0000 120 1601. Press twist lock 1124 140 9500 into retaining plate 0000 124 1000. Fit the filter/prefilter, then the retaining plate with twist lock and tighten firmly. No numerical tightening torque is given.
  • Stick the adhesive START-STOP label on the tank housing at the arrowed position in the page 2 drawing. Diagram callout 5 is this label, whereas summary item 5 is the retaining plate; the diagram and summary numberings are not interchangeable.
  • Unresolved source omission: summary item 1 says the assembly includes items 2 to 6, but the printed table ends at item 5 and supplies no label row or unambiguous label order number. The extracted text includes the fragment “000 967 4955 A XX”, but the retained scan does not establish a complete four-digit-prefix label order number. That fragment is not admitted as a separately orderable part. Do not fabricate item 6, drop the label instruction or claim complete current kit contents.
  • Last-TI references 16/2002 and 05/2001 are bibliographic pointers, not required external installation steps. The printed two-page instruction is fully reviewed with its internal table omission explicitly retained.
  • The named model scope is not extended to other models sharing series 1128 or later IPL sheets. Factory supply statements are historical, not current stock. No physical interchange test was performed.

Source: TI 39/2002, p. 1 · TI 39/2002, p. 2 — Entire TI 39/2002: installation drawings, label and summary.

Part numbers (5)
  • 0000 120 1655 — Fine-dust filter assemblySpecial accessory · Only the named model and configuration; see conditions
  • 0000 141 0600 — PrefilterFits over filter · Only the named model and configuration; see conditions
  • 0000 120 1601 — Air filterInner filter · Only the named model and configuration; see conditions
  • 1124 140 9500 — Twist lockRetaining-plate fastener · Only the named model and configuration; see conditions
  • 0000 124 1000 — Retaining plateIncludes fitted twist lock · Only the named model and configuration; see conditions

Service note · MS 440 / MS 460 / MS 650 / MS 660 / MS 880

MS 440 / MS 460 / MS 650 / MS 660 / MS 880: HD2 retrofit

HD2 replaces HD and is used WITHOUT the old prefilter.

  • Exact cover scope: MS440/MS460 series1128, MS650/MS660 series1122 and MS880 series1124. Previous HD air filter 0000 120 1654 with prefilter 0000 141 0300 is replaced by HD2 0000 140 4402. HD2 has a black frame and pleated filter material; the illustration distinguishes old filter and wraparound prefilter from new HD2.
  • HD2 can also be used on older machines in this named scope. Use HD2 WITHOUT a prefilter. Prefilter 0000 141 0300 remains available for the old HD filter, NOT as a requirement for HD2. Do not confuse this prefilter with required filter insert 0000 124 0800 on equipped systems.
  • The old HD filter is no longer available from factory; summary row1 includes prefilter row2 and insert row3 in the old assembly. These inclusions must not be transferred to the new HD2 package. See separate insert note for system-dependent retention.
  • Changeover is model-by-model over the next few months in this 2010 bulletin; summary says continuously. No universal changeover date or serial is supplied, and unnamed 044/046/064/066/088 models are not silently added.
  • New material is described as oil/water repellent, sturdy, easy to clean, retaining integrity after numerous cleaning cycles and giving improved filtration especially in dust. These are historical vendor claims, not a quantified efficiency, service-life guarantee or locally reproduced test.
  • Retained 2012 IPL sheets still list the prefilter beside HD2. That catalog coexistence is not permission to install the old prefilter on HD2: this TI explicitly says WITHOUT a prefilter. Canonical IPL rows remain unchanged; the historical service restriction is shown separately.
  • Historical English TI47/2010; no numeric serial cutoff or current stock promise. No physical interchange test was performed.

Source: TI 47/2010, p. 1 · TI 47/2010, p. 3 — MS 440 / MS 460 / MS 650 / MS 660 / MS 880: HD2 retrofit.

Part numbers (3)
  • 0000 120 1654 — HD air filterPrevious; discontinued from factory · TI47/2010 named models; preserve the stated filter-system conditions
  • 0000 141 0300 — Prefilter for HD filterRetained for old HD; omit on HD2 · TI47/2010 named models; preserve the stated filter-system conditions
  • 0000 140 4402 — HD2 air filterNew; older-machine use in named scope · TI47/2010 named models; preserve the stated filter-system conditions

Service note · MS 440 / MS 460 / MS 650 / MS 660 / MS 880

HD2 retrofit: retain the separately ordered filter insert

Systems already using 0000 124 0800 must continue to use it.

  • Air filter systems equipped with filter insert 0000 124 0800 MUST still use that insert after switching to HD2. The source does not identify which individual model variants have it; do not require it universally or remove it from an equipped system.
  • Order insert 0000 124 0800 separately: it is NOT supplied with HD2 0000 140 4402. The insert illustration depicts a separate piece, unlike the old wraparound prefilter on page1.
  • Summary row3 retains the insert for older machines and refers to service notes; old HD summary row1 includes rows2/3. New HD2 row4 has no such inclusion. WITHOUT a prefilter means omit 0000 141 0300, not omit this required insert.
  • Historical English TI47/2010; no numeric serial cutoff or current stock promise. No physical interchange test was performed.

Source: TI 47/2010, p. 1 · TI 47/2010, p. 2 · TI 47/2010, p. 3 — HD2 retrofit: retain the separately ordered filter insert.

Part numbers (2)
  • 0000 124 0800 — Filter insertRetain on equipped systems; order separately · TI47/2010 named models; preserve the stated filter-system conditions
  • 0000 140 4402 — HD2 air filterDoes not include the required separate insert · TI47/2010 named models; preserve the stated filter-system conditions

Service note · MS 440 / MS 460 / MS 650 / MS 660 / MS 880

HD2 air filter: clean from inside outwards

Use non-flammable cleaner for stubborn dirt; no pressure washer or extreme heat.

  • Section1.2: knock out the air filter or blow clear with compressed air FROM INSIDE OUTWARDS. For stubborn dirt, wash in clean NON-FLAMMABLE liquid, e.g. warm soapy water, then rinse from inside to outside under a water jet.
  • DO NOT use high-pressure cleaners. Dry ALL air filter parts; DO NOT expose to extreme heat. No numerical compressed-air pressure, water pressure, drying temperature or service interval is specified.
  • This cleaning section belongs to the HD2 change; the adjacent wire-mesh accessory heading is a separate section. Do not silently generalize these instructions to every filter material.
  • Historical English TI47/2010; no numeric serial cutoff or current stock promise. No physical interchange test was performed.

Source: TI 47/2010, p. 2 — HD2 air filter: clean from inside outwards.

No additional parts-table entry added.

Service note · MS 440 / MS 460 / MS 650 / MS 660 / MS 880

Wire-mesh filter: green housing remains a special accessory

The HD-to-HD2 replacement does not delete the wire-mesh option.

  • Section2 and summary row5 retain wire-mesh air filter 0000 120 1653 as a SPECIAL ACCESSORY. The source identifies a green filter housing, distinct from the black HD2 frame.
  • No replacement of this wire-mesh filter by HD2 is stated, and no environmental-use recommendation or comparative filtering efficiency is supplied for it. Historical continued availability is not a present-stock promise.
  • Historical English TI47/2010; no numeric serial cutoff or current stock promise. No physical interchange test was performed.

Source: TI 47/2010, p. 2 · TI 47/2010, p. 3 — Wire-mesh filter: green housing remains a special accessory.

Part numbers (1)
  • 0000 120 1653 — Wire-mesh air filter, green housingRetained special accessory · TI47/2010 named models; preserve the stated filter-system conditions

Wrong number or missing part for the MS 460? Report a correction →