← 044/046 · MS 440/460/461

Stihl 1128 · Section N · 13 of 16 · 26 parts

Handlebar, Heating element

Fits MS 460.

Parts diagrams →

Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101010101111121213131414151516171717181922020212223242525345667789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (26)

PosPart numberDescriptionQty
1 1128 790 1753 Handlebar 1
2 1128 790 1754 Handlebar 1
3 1128 790 3616 Wrap around handlebar Fitment / change note → 1
4 1128 790 3619 Wrap around handlebar Fitment / change note → option 1
5 not sold separately Handle hose 450 mm / 17 13/16'' not available as a separate item 1
6 not sold separately Insulating hose not available as a separate item 1
7 0000 442 7000 NLA Contact sleeve no longer available from factory 1
8 not sold separately Handle hose 164 mm not available as a separate item 1
9 not sold separately Handle hose 373 mm not available as a separate item 1
10 9074 478 4435 Pan head self-tapping screw IS-P6x19 2
11 9074 478 4475 Pan head self-tapping screw IS-P6x21.5 2
12 1128 791 5501 Elbow connector Fitment / change note → 1
13 1128 791 5500 Elbow connector Fitment / change note → → replaced by 1128 791 5501 TI 15/2007 1
14 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 1
15 9074 478 4675 Pan head self-tapping screw IS-P6x32.5 2
16 1128 434 5000 NLA Heating element 1
17 1118 431 6700 NLA Terminal socket no longer available from factory 2
18 1118 431 6600 NLA Terminal pin no longer available from factory 1
19 1121 791 9000 NLA Clamp 1
20 1121 442 0402 NLA Insulating hose 35 mm / 1.4'' 2
21 1128 430 0200 Switch 1
22 0000 958 1511 Washer 1
23 1128 432 2200 Hexagon nut 1
24 1110 432 9200 Grommet 1
25 9307 021 0120 Washer 5.3 1
Not numbered on the diagram — assemblies, kits and options
— 0000 791 2009 Handle hose Ø 19 mm x 5 m / 3/4x197'' not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · MS 460

MS 460: wrap handle and matching elbow

1128 790 3602 → 1128 790 3616. New elbow 1128 791 5501 cannot be used with old wrap handlebars.

  • 1128 790 3602 → 1128 790 3616. New elbow 1128 791 5501 cannot be used with old wrap handlebars.
  • New handlebars supplied with the matching new elbow can be fitted to older machines. This does not permit an elbow-only swap onto the old handle.
  • Old elbow 1128 791 5500 remains a historical service part for old wrap handles. Keep standard, heated and rescue/tool-holder configurations distinct.
  • The required extended-lower-section sprocket cover remains part of the wrap-handle configuration.
  • Retained edition: English USA. Introduction is continuous, with no numeric serial cutoff. Historical availability is not current stock or universal regional applicability.

Source: TI 15/2007, p. 1 · TI 15/2007, p. 3 · TI 15/2007, p. 6 · TI 15/2007, p. 8 — Section 3: wrap handle; elbow service note and summary.

Part numbers (4)
  • 1128 790 3602 — Previous wrap handlePrevious configuration · MS 460 wrap handle
  • 1128 790 3616 — Wrap handleRevised configuration · MS 460; new matching elbow
  • 1128 791 5500 — Elbow connectorPrevious configuration · Old wrap handlebars
  • 1128 791 5501 — Elbow connectorNew matching component · New wrap handlebars only

Conditional replacement · MS 460

MS 460: heated wrap handle and matching elbow

1128 790 3603 → 1128 790 3619. New elbow 1128 791 5501 cannot be used with old wrap handlebars.

  • 1128 790 3603 → 1128 790 3619. New elbow 1128 791 5501 cannot be used with old wrap handlebars.
  • New handlebars supplied with the matching new elbow can be fitted to older machines. This does not permit an elbow-only swap onto the old handle.
  • Old elbow 1128 791 5500 remains a historical service part for old wrap handles. Keep standard, heated and rescue/tool-holder configurations distinct.
  • The required extended-lower-section sprocket cover remains part of the wrap-handle configuration.
  • Retained edition: English USA. Introduction is continuous, with no numeric serial cutoff. Historical availability is not current stock or universal regional applicability.

Source: TI 15/2007, p. 1 · TI 15/2007, p. 3 · TI 15/2007, p. 6 · TI 15/2007, p. 8 — Section 3: heated wrap handle; elbow service note and summary.

Part numbers (4)
  • 1128 790 3603 — Previous heated wrap handlePrevious configuration · MS 460 heated wrap handle
  • 1128 790 3619 — Heated wrap handleRevised configuration · MS 460; new matching elbow
  • 1128 791 5500 — Elbow connectorPrevious configuration · Old wrap handlebars
  • 1128 791 5501 — Elbow connectorNew matching component · New wrap handlebars only

Service note · MS 460

MS 460: wrap-handle contour and elbow dimensions

The new elbow is shorter in the illustrated dimension and cannot be fitted to old wrap handlebars.

  • Section 3 is MS 460 ONLY. The new wrap handlebar is longer, its bending radius on the sprocket-cover side is reduced, and its hose is shorter in the lower curved section. Figure 176TI021 KN identifies the matching elbow as item 1; no numerical handle-bend radius is given.
  • Figure 176TI022 KN labels dimension a on old elbow 1128 791 5500 as 2.0 inches (51 mm), versus 1.33 inches (33.75 mm) on new elbow 1128 791 5501. These are the illustrated elbow dimensions, NOT handle bend radii.
  • New handlebars include the new elbow and can be fitted to older machines within this scope. New elbow 1128 791 5501 CANNOT be used with old wrap handlebars. Old elbow 1128 791 5500 remains for old handlebars; do not treat the smaller dimension as permission to trim an old elbow.
  • Standard 1128 790 3616, heated 1128 790 3619 and rescue/tool-holder 1128 790 3614 configurations remain distinct in the companion fitment notes. The rescue tool holder is for the combination wrench.
  • Retained 2007 source guidance, not present-day stock availability. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 15/2007, p. 6 · TI 15/2007, p. 8 — MS 460: wrap-handle contour and elbow dimensions.

Part numbers (5)
  • 1128 791 5500 — Previous elbow connectorIllustrated a = 51 mm · MS 460; source restrictions apply
  • 1128 791 5501 — New elbow connectorIllustrated a = 33.75 mm; new handle only · MS 460; source restrictions apply
  • 1128 790 3616 — Standard wrap handlebarNew elbow included · MS 460; source restrictions apply
  • 1128 790 3619 — Heated wrap handlebarDistinct heated configuration · MS 460; source restrictions apply
  • 1128 790 3614 — Rescue wrap handlebarCombination-wrench holder · MS 460; source restrictions apply

Wrong number or missing part for the MS 460? Report a correction →