Stihl 1128 · Section Q · 16 of 16 · 47 parts
Rescue saw USA
Fits MS 460.
Historical fitment & changes (9) — includes parts and conditions not shown on this drawing.
Parts (47)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 0000 140 4402 | Air filter HD2 | 1 |
| 2 | 0000 967 1505 | Model plate MAGNUM RESCUE | 1 |
| 3 | 1122 084 7100 | Cap | 1 |
| 4 | 1122 025 2200 | Plug | 1 |
| 5 | 1128 790 3614 | Wrap around handlebar Fitment / change note → | 1 |
| 6 | 9074 478 4675 | Pan head self-tapping screw IS-P6x32.5 | 2 |
| 7 | 1128 791 5501 | Elbow connector Fitment / change note → | 1 |
| 8 | 1128 791 5500 | Elbow connector Fitment / change note → → replaced by 1128 791 5501 TI 15/2007 | 1 |
| 9 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 1 |
| 10 | 9307 021 0120 | Washer 5.3 Fitment / change note → | 1 |
| 11 | 1128 891 8600 | Support | 1 |
| 12 | 1122 648 0403 | Chain sprocket cover Fitment / change note → | 1 |
| 13 | 1121 648 6610 | Bumper strip | 2 |
| 14 | 1122 656 1510 | Guard | 1 |
| 15 | 3003 655 9200 | Washer Fitment / change note → | 2 |
| 16 | 1128 664 2200 | Cover Fitment / change note → | 1 |
| 17 | 1128 664 0501 | Bumper spike Fitment / change note → | 1 |
| 18 | 9008 319 1020 | Hexagon head screw M5x20 Fitment / change note → | 2 |
| 19 | 9214 320 0700 | Lock nut M5 Fitment / change note → | 3 |
| 20 | 9008 319 0960 | Hexagon head screw M5x12 Fitment / change note → | 2 |
| 21 | 1122 656 7700 | Chain catcher | 1 |
| 22 | 9022 341 1019 | Spline screw IS-M5x20 | 1 |
| 23 | 1128 195 3401 | Starter grip | 1 |
| 24 | 1113 195 8200 | Starter rope Ø 3.5x960 mm | 1 |
| 25 | 1128 145 3701 | Guard plate Fitment / change note → | 1 |
| 26 | 1128 148 1200 | Screw M6 | 1 |
| 27 | 9022 341 0960 | Spline screw IS-M5x12 → replaced by 9022 341 0980 TI 3/2006 | 2 |
| 28 | 9307 021 0120 | Washer 5.3 Fitment / change note → | 1 |
| 30 | 3944 660 0072 | 36RDR chain Rapid Duro R | 1 |
| 31 | 3003 650 6501 | Depth limiter kit | 1 |
| 32 | 9570 601 1880 | Star grip screw M8x35-AL Fitment / change note → | 1 |
| 33 | 9308 021 0180 | Washer 8.4 Fitment / change note → | 1 |
| 34 | 9064 341 1860 | Countersunk screw M8x30 Fitment / change note → | 2 |
| 35 | 3003 002 9421 | Guide bar Fitment / change note → | 1 |
| 36 | 9008 319 1010 | Hexagon head screw M5x18 Fitment / change note → | 2 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1128 640 1709 NLA | Chain sprocket cover Fitment / change note → | 1 |
| — | 0000 930 2203 | Starter rope Ø 3.5 mm x 30.5 m not illustratedoption | 1 |
| — | 3944 660 6300 | Right hand cutter Fitment / change note → | 1 |
| — | 3944 660 6500 | Left hand cutter Fitment / change note → | 1 |
| — | 3725 662 1000 NLA | Drive link Fitment / change note → | 1 |
| — | 3724 660 6600 | Tie strap with rivets Fitment / change note → | 1 |
| — | 3994 662 3901 | Triple-hump tie strap, right-hand Fitment / change note → | 1 |
| — | 3994 662 4001 | Triple-hump tie strap, left-hand Fitment / change note → | 1 |
| — | 3949 007 1000 NLA | Cutter repair kit, r/h Fitment / change note → not illustratedoption | 1 |
| — | 3949 007 1001 NLA | Cutter repair kit, l/h Fitment / change note → not illustratedoption | 1 |
| — | 3949 007 1002 NLA | Drive link repair kit Fitment / change note → not illustratedoption | 1 |
| — | 1128 007 1014 | Depth limiter kit Fitment / change note → | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · MS 460
MS 460 Rescue (USA): depth-limiter kits with or without guide bar
TI 21/2004 separates kit 1128 261 0001 with the prepared guide bar from kit 1128 007 1013 without it.
Later reviewed guidance: MS 460 Rescue (USA): revised depth-limiter kit and longer screws
- USA-edition MS 460 Rescue configuration only; this does not approve a conversion of a standard MS 460, 044 or 046 or extend the separate non-USA conversion-kit sheet.
- 1128 261 0001 contains items 1–8, including specially prepared guide bar 3003 002 9421. 1128 007 1013 contains items 2–8 and excludes the guide bar.
- The summary gives no separate order numbers for sleeve item 2 or guide item 3. Do not invent them or transfer unrelated sleeve numbers.
- Mounting requires repositioning the bumper spike with spacers 3003 655 9200 and M5x18 screws 9008 319 1010, as shown in section 1.1.
- The accessory limits depth of entry; it is not protection against chain contact. Source scope is specially trained rescue personnel, with the owner manual still required.
- Later TI 31/2005 revises the no-bar kit and its hardware. This 2004 composition is not a present-day kit-content guarantee.
- The metal sleeve slides within a preset range on the specially prepared bar. Its added weight makes the saw more nose-heavy. Page 1 shows the special accessory fitted to the Rescue saw; the photograph does not establish standard-saw interchange or dimensions.
- Section 1.1 and its diagrams require removing the sprocket cover and bumper spike, taking out both bumper strips and the old screws, installing M5x18 screws as illustrated, and refitting the strips. Spacer washers go between the cover and bumper spike; secure the spike with the locknuts. The summary supplies no separate order numbers for the strips, spike or locknuts and no tightening torque; do not infer them from diagram callouts.
- Section 1.2 mounts the guide bar and saw chain first, then slips the guide over the bar and inserts its screws. Push the sliding sleeve over the guide, fit the star knob and washer, and tighten the guide screws. Pull the sleeve forward as far as the stop and tighten the star knob firmly. The washer lies between the knob and sleeve in the illustration; no numerical screw or knob torque is specified.
- Section 1.3 states a cutting-depth range from a few fractions of an inch up to 7.8 in (20 cm); no exact numerical lower limit is provided. Before adjusting, shut off the engine, engage the chain brake by pushing the hand guard toward the bar nose, and put the saw on the ground with the right foot pressing down in the rear handle. Hold the top of the sleeve with the right hand, loosen the star knob with the left, adjust the depth and tighten the knob firmly. This is the source-described adjustment sequence, not permission for a live hardware operation.
- Diagram callouts are local, not global part identifiers: the star knob is item 4 in mounting section 1.2, item 2 in adjustment section 1.3 and item 6 in the summary. Summary drawing shows two guide screws (item 4), two spacers (item 7) and two M5x18 screws (item 8), with one knob and its washer. Sleeve item 2 and guide item 3 have no individual order numbers in the table.
- Rescue operators must be trained in both chain-saw use and emergency risk assessment. The source requires special cutting techniques and says a specifically authorized carbide-tipped chain may be necessary; it supplies no chain part number or universal material-cutting approval. Rescue work can cause severe or fatal injury even for trained users, with increased risks from reactive forces, fire or explosion, electrocution and damaged chain to users, bystanders and people being rescued.
- The Rescue saw owner manual remains a required separate source, especially Safety Precautions, Proper Clothing and Cutting Instructions. The TI notes that conventional felling/limbing instructions also appear in that manual because the saw can be used conventionally; this does not make the limiter a general-purpose accessory. The exact USA Rescue owner manual is not established in the checked local manual inventory or admitted reader. This historical note is not a substitute for its complete precautions.
Source: TI 21/2004, p. 1 · TI 21/2004, p. 2 · TI 21/2004, p. 3 · TI 21/2004, p. 4 · TI 21/2004, p. 5 — Complete sections 1, 1.1–1.3 and 2: Rescue-only purpose and precautions, bumper-spike repositioning, limiter mounting, depth adjustment, exploded diagram and both kit compositions.
Part numbers (8)
- 1128 261 0001 — Depth limiter kit with guide barKit, items 1–8 · USA MS 460 Rescue; includes prepared bar
- 1128 007 1013 — Depth limiter kitKit, items 2–8 · USA MS 460 Rescue; excludes guide bar
- 3003 002 9421 — Specially prepared guide barRequired matching bar · Depth-limiter configuration
- 9064 341 1860 — Countersunk screwKit item 4 · Depth-limiter guide mounting
- 9308 021 0180 — WasherKit item 5 · Star-knob assembly
- 9570 601 1880 — Star knobKit item 6 · Depth-limiter assembly
- 3003 655 9200 — SpacerKit item 7 · Bumper-spike repositioning
- 9008 319 1010 — Screw M5x18Kit item 8 · 2004 bumper-spike repositioning
Conditional replacement · MS 460
MS 460 Rescue (USA): revised depth-limiter kit and longer screws
TI 31/2005 replaces 1128 007 1013 with 1128 007 1014, adding the sprocket-cover shield and M5x20 mounting screws.
- Applies to the USA-edition MS 460 Rescue configuration, not an automatic retrofit to standard saws or the non-USA conversion-kit catalog sheet.
- Kit 1128 007 1014 adds cover 1128 664 2200 and longer mounting screws 9008 319 1020 (M5x20). All other parts of the previous no-bar depth-limiter kit remain unchanged in this source.
- The new number does not establish that a guide bar is included, nor a renumbering of the separate with-bar kit.
- Introduction is in progress; no serial cutoff is printed. The previous kit is supplied only while stocks last in this historical bulletin.
- Read the cited 2004 mounting context and 2005 cover assembly together; this note is not the full rescue saw operating manual.
- Section3 refers to the matching section2 cover assembly: new shield and longer hex-head screws, with all other limiter parts unchanged. The previous 2004 limiter uses M5x18 screws; the M5x12-to-M5x20 comparison in the 2005 summary describes the cover assemblies, not a claim that the old limiter had M5x12 screws. No new number or revised contents for with-bar kit1128 261 0001 are established.
Source: TI 31/2005, p. 1 · TI 31/2005, p. 2 · TI 31/2005, p. 3 · TI 31/2005, p. 4 — Complete sections1–1.4,2–4: chain design, applications, sharpening diagrams/settings, link repair, cover and kit revisions, exploded diagram and all20 summary items.
Part numbers (4)
- 1128 007 1013 — Depth limiter kitPrevious no-bar kit · 2004 rescue configuration
- 1128 007 1014 — Depth limiter kitRevised no-bar kit · USA MS 460 Rescue
- 1128 664 2200 — CoverAdded kit component · Chain-sprocket-cover shield
- 9008 319 1020 — Hex screw M5x20Longer mounting screw · Revised cover/depth-limiter configuration
Conditional replacement · MS 460
MS 460 Rescue (USA): sprocket cover and matching hardware
The 1703-to-1704 cover change includes a shield, spacers and revised screws/nuts; the bumper spike keeps its number.
Later reviewed guidance: MS 460 Rescue: 1709 cover accepts both collar-screw types
- USA-edition MS 460 Rescue configuration only. This does not broaden the regional applicability of the separate non-USA conversion-kit sheet.
- 1128 640 1703 includes the old M5x12 screws, old nuts and bumper spike (items 3, 5, 8). New 1128 640 1704 includes shield, M5x20 screws, new locknuts, spacers and the same bumper spike (items 2, 4, 6, 7, 8).
- Do not transfer the old short-screw combination to the revised shield assembly. The source specifies 9008 319 1020 and 9214 320 0700 for the new cover.
- Bumper spike 1128 664 0501 is unchanged. The old screw and nut remain available for other models in this historical source, not as universal substitutes here.
- Introduction is in progress; no numeric cutoff is supplied. Later TI 15/2007 restricts this 1704 cover to old collar screws; follow the linked compatibility note.
- Section2 compares the previous cover above the new assembly below. The exploded diagram places the two spacer washers between the sprocket cover and added shield, with the bumper spike outside the shield and locknuts outside the spike. Diagram callouts differ from summary item numbers; they do not supply torque or dimensions.
- The summary specifies old screw DIN933-M5x12-8.8 and new screw DIN933-M5x20-8.8; old nut DIN6927-M5-10 and new locknut DIN980-V M5-10. Strength classes and nut standards are retained, not reduced to thread size alone. Old screws and nuts each carry remark2 (other models); old cover carries remark1 (factory stocks last).
Source: TI 31/2005, p. 1 · TI 31/2005, p. 2 · TI 31/2005, p. 3 · TI 31/2005, p. 4 — Complete sections1–1.4,2–4: chain design, applications, sharpening diagrams/settings, link repair, cover and kit revisions, exploded diagram and all20 summary items.
Part numbers (9)
- 1128 640 1703 — Chain sprocket coverPrevious assembly · USA MS 460 Rescue; old hardware
- 1128 640 1704 — Chain sprocket coverRevised assembly · USA MS 460 Rescue; shield and new hardware
- 1128 664 2200 — CoverAdded shield · Revised assembly
- 9008 319 0960 — Screw M5x12Previous fastener · Old cover only in this record
- 9008 319 1020 — Screw M5x20Revised fastener · New cover assembly
- 9216 263 0700 — Nut M5Previous fastener · Old cover assembly
- 9214 320 0700 — Locknut M5Revised fastener · New cover assembly
- 3003 655 9200 — Washer/spacerAdded component · New cover assembly
- 1128 664 0501 — Bumper spikeUnchanged number · Both listed rescue cover assemblies
Conditional replacement · MS 460
MS 460 Rescue (USA): Rapid Duro S to Rapid Duro R
TI 31/2005 replaces the listed 36 RDS chain with 36 RDR; the chains have different repair components.
- Listed chain 3949 000 0072 (36 RDS) is replaced by 3944 000 0072 (36 RDR) on the MS 460 Rescue in this USA edition.
- This is not permission to mix RDS and RDR links, cutters or tie straps, or to generalize this loop number to every bar length.
- The RDR design has a triple-humped tie strap in front of each cutter on the opposite side. Individual RDR components can be replaced; old RDS repair parts remain separately identified.
- The source requires the USG with the appropriate diamond wheel and its instructions; carbide tips cannot be resharpened with a file. This record does not reproduce the complete sharpening or rescue-operation procedure.
- Introduction is in progress without a serial cutoff; application is specially trained rescue personnel. Historical stock statements are not current availability.
- The new RDR chain is identified by a yellow label. The comparison diagram places RDS above RDR; impact-resistant carbide tips are brazed over a large area of the top plate. The TI attributes increased strength, longer edge life and smoother cutting to this design and describes Oilomatic lubrication. These are qualitative source claims, not measured gains or a low-kickback certification.
- Section 1.3 gives sharpening angle a = 15°, side plate angle b = 85° and depth-gauge setting c = 0.65 mm. These geometric labels are distinct from USG scale letters A, B and C. For right/left cutters, USG settings are A +10/+10, B 0/0 and C +15/−15. For depth gauges, A +40, B 0 and C 0. Cutter wheel is 5203 757 0901; depth-gauge wheel is 5203 750 7015. Do not interchange the wheels or apply cutter settings to depth gauges.
- The TI expressly requires following the instructions supplied with the USG. An exact applicable USG instruction manual is not established in the bounded local filename inventory or admitted reader. The settings above do not reproduce full setup, wheel handling or sharpening instructions, and no unprinted feed, speed or grinding tolerance is inferred.
- Summary item10 (old RDS) and item11 (new RDR) both print remark1, whose wording refers to the previous version being supplied only while factory stocks last. The mark on the new RDR row is retained as a source ambiguity, not silently deleted or interpreted as proof that the new RDR was already discontinued. The old cover and old limiter kit also carry remark1.
Source: TI 31/2005, p. 1 · TI 31/2005, p. 2 · TI 31/2005, p. 3 · TI 31/2005, p. 4 — Complete sections1–1.4,2–4: chain design, applications, sharpening diagrams/settings, link repair, cover and kit revisions, exploded diagram and all20 summary items.
Part numbers (4)
- 3949 000 0072 — Rapid Duro S chain, 36 RDSPrevious chain · Listed MS 460 Rescue configuration
- 3944 000 0072 — Rapid Duro R chain, 36 RDRNew chain · Listed MS 460 Rescue configuration
- 5203 757 0901 — USG cutter grinding wheelSection1.3 footnote1 · RDR cutters; cutter USG settings only
- 5203 750 7015 — USG depth-gauge grinding wheelSection1.3 footnote2 · RDR depth gauges; depth-gauge USG settings only
Historical fitment · MS 460
MS 460 Rescue (USA): keep RDS and RDR repair components separate
The 2005 table retains RDS repair kits for older chains and separately lists RDR cutters and links; it does not establish mixed-chain compatibility.
- RDS right/left cutter repair kits 3949 007 1000 / 3949 007 1001 and drive-link item 3949 007 1002 remain for older machines in the table.
- RDR right cutter 3944 660 6300 and left cutter 3944 660 6500 are separate parts. Do not swap their handedness or treat them as RDS repair-kit replacements.
- RDR table lists drive link 3725 662 1000, right/left triple-hump tie straps 3994 662 3901 / 3994 662 4001, and preset tie strap 3724 660 6600.
- The 3994 prefix is printed for the tie straps even though the chain series is 3944; it is retained exactly, not normalized to match the chain number.
- Individual RDR component repair is supported by the source; no RDS/RDR component mixing or complete repair procedure is established here.
- Section 1.4 identifies NG 4, NG 5 and NG 7 chain breaking and rivet spinning tools for repair. Individual cutters, tie straps, triple-humped tie straps and drive links can be replaced on RDR; no rivet dimensions, tool settings or complete chain assembly procedure are supplied.
- Summary items12–14 each carry remark3: previous RDS repair components remain available for older machines. The other RDR repair rows are separate new entries, not one-to-one supersession pairs for the RDS kits. All other parts remain as before.
Source: TI 31/2005, p. 1 · TI 31/2005, p. 2 · TI 31/2005, p. 3 · TI 31/2005, p. 4 — Complete sections1–1.4,2–4: chain design, applications, sharpening diagrams/settings, link repair, cover and kit revisions, exploded diagram and all20 summary items.
Part numbers (9)
- 3949 007 1000 — RDS cutter repair kit, rightOlder-chain component · RDS only
- 3949 007 1001 — RDS cutter repair kit, leftOlder-chain component · RDS only
- 3949 007 1002 — RDS drive-link itemOlder-chain component · RDS only
- 3944 660 6300 — RDR cutter, rightNew-chain component · RDR only
- 3944 660 6500 — RDR cutter, leftNew-chain component · RDR only
- 3725 662 1000 — RDR drive link, 1.6 mmNew-chain component · RDR table item 17
- 3994 662 3901 — Triple-hump tie strap, rightNew-chain component · RDR table item 18
- 3994 662 4001 — Triple-hump tie strap, leftNew-chain component · RDR table item 19
- 3724 660 6600 — Preset tie strapNew-chain component · RDR table item 20
Conditional replacement · MS 460
MS 460 Rescue: new guard plate needs a separate washer
Guard plate 1128 145 3701 replaces 1128 145 3700 and requires washer 9307 021 0120 under the mounting screw.
- Guard plate 1128 145 3701 replaces 1128 145 3700 and requires washer 9307 021 0120 under the mounting screw.
- The new plate has an oblong front mounting hole instead of the previous round hole.
- The washer is not included in the guard-plate kit and must be ordered separately according to the source.
- USA rescue configuration only; this does not broaden the separate non-USA conversion-kit sheet.
- Retained edition: English USA. Introduction is continuous, with no numeric serial cutoff. Historical availability is not current stock or universal regional applicability.
Source: TI 8/2007, p. 1 · TI 8/2007, p. 2 — Guard plate service note and summary.
Part numbers (3)
- 1128 145 3700 — Guard platePrevious version · Round mounting hole
- 1128 145 3701 — Guard plateRevised version · Oblong hole; requires separate washer
- 9307 021 0120 — WasherRequired, not included · Under new guard mounting screw
Conditional replacement · MS 460
MS 460 Rescue: 1709 cover accepts both collar-screw types
Rescue cover 1128 640 1709 replaces 1128 640 1704; its countersunk holes accept either old or new collar screws.
- Rescue cover 1128 640 1709 replaces 1128 640 1704; its countersunk holes accept either old or new collar screws.
- Old 1128 640 1704 is restricted to old collar screws 0000 953 6605 and must not be combined with 1138 664 2400.
- The source explicitly permits the new cover on older machines; the summary includes wrap cover item 6 (1122 648 0403).
- Retain the lug-free side-plate requirement when changing to the countersunk cover. This USA rescue note does not alter non-USA conversion-kit scope.
- Retained edition: English USA. Introduction is continuous, with no numeric serial cutoff. Historical availability is not current stock or universal regional applicability.
Source: TI 15/2007, p. 1 · TI 15/2007, p. 3 · TI 15/2007, p. 4 · TI 15/2007, p. 5 · TI 15/2007, p. 8 — Sections 1.2–1.3, 2 and summary rescue-cover row.
Part numbers (5)
- 1128 640 1704 — Rescue sprocket coverPrevious version · Old collar screws only
- 1128 640 1709 — Rescue sprocket coverNew countersunk version · Either collar screw type
- 0000 953 6605 — Collar screwPrevious version · Old or new rescue cover
- 1138 664 2400 — Collar screwNew version · New countersunk rescue cover only
- 1122 648 0403 — Wrap-handle coverIncluded item 6 · New rescue cover assembly
Conditional replacement · MS 460
MS 460: rescue wrap handle with tool holder and matching elbow
1128 790 3614 is listed for the rescue saw with tool holder; no predecessor is specified. New elbow 1128 791 5501 cannot be used with old wrap handlebars.
- 1128 790 3614 is listed for the rescue saw with tool holder; no predecessor is specified. New elbow 1128 791 5501 cannot be used with old wrap handlebars.
- New handlebars supplied with the matching new elbow can be fitted to older machines. This does not permit an elbow-only swap onto the old handle.
- Old elbow 1128 791 5500 remains a historical service part for old wrap handles. Keep standard, heated and rescue/tool-holder configurations distinct.
- The required extended-lower-section sprocket cover remains part of the wrap-handle configuration.
- Retained edition: English USA. Introduction is continuous, with no numeric serial cutoff. Historical availability is not current stock or universal regional applicability.
Source: TI 15/2007, p. 1 · TI 15/2007, p. 3 · TI 15/2007, p. 6 · TI 15/2007, p. 8 — Section 3: rescue wrap handle with tool holder; elbow service note and summary.
Part numbers (3)
- 1128 790 3614 — Rescue wrap handle with tool holderRevised configuration · MS 460; new matching elbow
- 1128 791 5500 — Elbow connectorPrevious configuration · Old wrap handlebars
- 1128 791 5501 — Elbow connectorNew matching component · New wrap handlebars only
Service note · MS 460
MS 460: wrap-handle contour and elbow dimensions
The new elbow is shorter in the illustrated dimension and cannot be fitted to old wrap handlebars.
- Section 3 is MS 460 ONLY. The new wrap handlebar is longer, its bending radius on the sprocket-cover side is reduced, and its hose is shorter in the lower curved section. Figure 176TI021 KN identifies the matching elbow as item 1; no numerical handle-bend radius is given.
- Figure 176TI022 KN labels dimension a on old elbow 1128 791 5500 as 2.0 inches (51 mm), versus 1.33 inches (33.75 mm) on new elbow 1128 791 5501. These are the illustrated elbow dimensions, NOT handle bend radii.
- New handlebars include the new elbow and can be fitted to older machines within this scope. New elbow 1128 791 5501 CANNOT be used with old wrap handlebars. Old elbow 1128 791 5500 remains for old handlebars; do not treat the smaller dimension as permission to trim an old elbow.
- Standard 1128 790 3616, heated 1128 790 3619 and rescue/tool-holder 1128 790 3614 configurations remain distinct in the companion fitment notes. The rescue tool holder is for the combination wrench.
- Retained 2007 source guidance, not present-day stock availability. No numeric serial cutoff is supplied. No physical interchange test was performed.
Source: TI 15/2007, p. 6 · TI 15/2007, p. 8 — MS 460: wrap-handle contour and elbow dimensions.
Part numbers (5)
- 1128 791 5500 — Previous elbow connectorIllustrated a = 51 mm · MS 460; source restrictions apply
- 1128 791 5501 — New elbow connectorIllustrated a = 33.75 mm; new handle only · MS 460; source restrictions apply
- 1128 790 3616 — Standard wrap handlebarNew elbow included · MS 460; source restrictions apply
- 1128 790 3619 — Heated wrap handlebarDistinct heated configuration · MS 460; source restrictions apply
- 1128 790 3614 — Rescue wrap handlebarCombination-wrench holder · MS 460; source restrictions apply
Wrong number or missing part for the MS 460? Report a correction →