← MS 441

Stihl 1138 · Section J · 9 of 17 · 29 parts

Shroud, Housing

Fits MS 441, MS 441 C.

Parts diagrams →

Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202122232425263456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (29)

PosPart numberDescriptionQty
1 1138 084 0902 Shroud Fitment / change note → 1
2 1121 084 7000 Slotted nut 1
3 1121 084 6901 Insulator 1
4 1135 028 1002 Grommet 1
5 1121 084 7100 Cap 1
6 1138 028 1001 Grommet Fitment / change note → 1
7 1138 028 1000 Grommet Fitment / change note → 1
8 1138 028 1004 Grommet Fitment / change note → 1
9 1138 028 1002 Grommet Fitment / change note → → replaced by 1138 028 1004 TI 13/2009 1
10 1128 084 1400 Cover 1
11 1138 084 4101 Shutter 1
12 9074 478 2967 Pan head self-tapping screw IS-P4x10 1
13 1138 120 3502 Housing 1
14 1138 120 3503 Housing 1
15 1138 120 3504 Housing 1
16 1138 440 3004 Wiring harness 1
17 1138 440 2202 NLA Ground wire 1
18 not sold separately Bushing not available as a separate item 4
19 9022 341 0980 Spline screw IS-M5x16 4
20 0000 989 0507 Grommet 1
21 1138 182 0701 Grommet 1
22 0000 989 0808 Grommet 1
23 1138 140 7801 Pre-separator 1
24 1138 141 7600 Duct base 1
25 9022 346 0658 Spline screw IS-M4x12 2
26 0000 967 1593 Model plate Magnum 1
Not numbered on the diagram — assemblies, kits and options
— 1138 080 1651 Shroud Fitment / change note → 1
— 1138 080 1650 Shroud Fitment / change note → 1
— 1138 007 1005 Set of grommets Fitment / change note → 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · MS 441 / MS 441 C-Q

MS 441 / MS 441 C-Q: matched shroud and decompression-valve grommet

Old and new shrouds require their corresponding grommets.

  • Previous shroud 1138 084 0900 becomes 1138 084 0902. New shroud has modified COOLING-AIR ROUTING and easier mounting/removal; original figure 219TI043 shows old LEFT, new RIGHT. No quantified cooling or performance improvement is supplied.
  • Cylinder grommet 1138 028 1002 becomes 1138 028 1004, adapted to the new shroud. Prose describes a LARGER RECESS for the decompression valve; figure 219TI044 captions say previous WITHOUT RECESS, new WITH RECESS. Both descriptions are retained, not converted into invented dimensions.
  • Old grommet 1138 028 1002 can ONLY be combined with OLD shroud 1138 084 0900 and remains available for older machines. New grommet 1138 028 1004 can ONLY be combined with NEW shroud 1138 084 0902; the new shroud likewise requires the new grommet. No mixed old/new pairing is approved.
  • Previous shroud is factory supplied only WHILE STOCKS LAST. Modification introduction is CONTINUOUS, without a numeric serial boundary.
  • Source explicitly names MS 441 and MS 441 C-Q, series 1138. MS 441 provides an exact catalog navigation anchor; the shared IPL label MS 441 C is NOT asserted to be an exact C-Q alias or permission for other C variants.
  • Historical English 2009 source, not present-day stock or approval for unlisted variants. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 13/2009, p. 1 · TI 13/2009, p. 2 — MS 441 / MS 441 C-Q: matched shroud and decompression-valve grommet.

Part numbers (4)
  • 1138 084 0900 — Previous shroudOnly previous grommet; stocks last · MS 441 / MS 441 C-Q; source restrictions apply
  • 1138 084 0902 — New shroudOnly new grommet · MS 441 / MS 441 C-Q; source restrictions apply
  • 1138 028 1002 — Previous cylinder grommetOnly old shroud; older-model supply · MS 441 / MS 441 C-Q; source restrictions apply
  • 1138 028 1004 — New cylinder grommetOnly new shroud; valve recess · MS 441 / MS 441 C-Q; source restrictions apply

Service note · MS 441 / MS 441 C-Q

MS 441 / MS 441 C-Q: two shroud-kit numbers with different included parts

Kit 1650 includes one grommet; the summary separately lists kit 1651 with a set.

  • Section 1.3 names NEW shroud kit 1138 080 1650 for older machines, including modified cylinder grommet 1138 028 1004. Summary item 3 repeats1650, includes item 4, and has older-machine/service-note remarks 1/2.
  • Summary item 2 separately lists old kit 1138 080 1601 to NEW 1138 080 1651, INCLUDING ITEM5 (set of grommets). Remarks1/4 permit older machines and retain old kit only while stocks last. The printed1650 and1651 are BOTH retained as different listed packages, not silently corrected to one number.
  • The prose says the new shroud kit does NOT include grommets 1138 028 1000 or 1138 028 1001; procure them separately if needed. This statement occurs with the prose’s1650 kit; the TI does NOT enumerate the full contents of1651 or its grommet set, so do not infer those two grommets are included in1651.
  • Previous shroud 1138 084 0900 and old kit 1138 080 1601 remain available only WHILE STOCKS LAST. Retrofit permission for a complete kit does not permit mismatched new shroud/old cylinder grommet.
  • Source explicitly names MS 441 and MS 441 C-Q, series 1138. MS 441 provides an exact catalog navigation anchor; the shared IPL label MS 441 C is NOT asserted to be an exact C-Q alias or permission for other C variants.
  • Historical English 2009 source, not present-day stock or approval for unlisted variants. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 13/2009, p. 2 — MS 441 / MS 441 C-Q: two shroud-kit numbers with different included parts.

Part numbers (6)
  • 1138 080 1601 — Previous shroud kitWhile stocks last · MS 441 / MS 441 C-Q; source restrictions apply
  • 1138 080 1650 — Shroud kit including cylinder grommetProse and summary item 3 · MS 441 / MS 441 C-Q; source restrictions apply
  • 1138 080 1651 — Shroud kit including grommet setSummary item 2; distinct package · MS 441 / MS 441 C-Q; source restrictions apply
  • 1138 028 1004 — Modified cylinder grommetIncluded in1650 · MS 441 / MS 441 C-Q; source restrictions apply
  • 1138 028 1000 — GrommetNot included by prose kit description · MS 441 / MS 441 C-Q; source restrictions apply
  • 1138 028 1001 — GrommetNot included by prose kit description · MS 441 / MS 441 C-Q; source restrictions apply

Service note · MS 441 / MS 441 C-Q

MS 441 / MS 441 C-Q: grommet-set replacement and old-shroud service supply

The new set is restricted to the new shroud; old-shroud grommets become individual purchases.

  • Set of grommets 1138 007 1001 becomes 1138 007 1005. NEW SET 1138 007 1005 can ONLY be combined with NEW SHROUD 1138 084 0902.
  • Old set 1138 007 1001 remains available only WHILE STOCKS LAST. After exhaustion, grommets for OLD SHROUD 1138 084 0900 must be procured INDIVIDUALLY. This is not permission to substitute the new set into an old shroud.
  • Summary item 5 repeats the set replacement and service-note/stock-exhaustion remarks 2/4. No complete set contents, individual quantities or present-day availability are established by this historical source.
  • Source explicitly names MS 441 and MS 441 C-Q, series 1138. MS 441 provides an exact catalog navigation anchor; the shared IPL label MS 441 C is NOT asserted to be an exact C-Q alias or permission for other C variants.
  • Historical English 2009 source, not present-day stock or approval for unlisted variants. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 13/2009, p. 2 — MS 441 / MS 441 C-Q: grommet-set replacement and old-shroud service supply.

Part numbers (4)
  • 1138 007 1001 — Previous grommet setStocks last; then individual old-shroud parts · MS 441 / MS 441 C-Q; source restrictions apply
  • 1138 007 1005 — New grommet setOnly new shroud 1138 084 0902 · MS 441 / MS 441 C-Q; source restrictions apply
  • 1138 084 0900 — Previous shroudIndividual grommets after old-set exhaustion · MS 441 / MS 441 C-Q; source restrictions apply
  • 1138 084 0902 — New shroudRequired by new set · MS 441 / MS 441 C-Q; source restrictions apply

Wrong number or missing part for the MS 441, MS 441 C? Report a correction →