Stihl engine series 1138 · PRO
MS 441
Chain size for this family: 3/8″ · .050–.063″, 3003-mount bar. Typical STIHL drive-link counts for 3/8" (full) chain: 16″ = 60, 18″ = 66, 20″ = 72, 22″ = 76, 25″ = 84, 28″ = 91. Count the links on your old chain or read the bar stamp before ordering.
Chains & bars that fit the MS 441
Pitch & gauge 3/8″ · .050–.063″ · recommended bar 16–28″ · bar mount 3003 / D025 · round file 7/32" (5.5 mm) for Oregon; STIHL lists 13/64" (5.2 mm)
Chain & bar by length
| Bar | Drive links | Shop |
|---|---|---|
| 16″ | 60 DL | Chain .050″ →Chain .063″ → Bar · 3003 → |
| 18″ | 66 DL | Chain .050″ →Chain .063″ → Bar · 3003 → |
| 20″ | 72 DL | Chain .050″ →Chain .063″ → Bar · 3003 → |
| 22″ | 76 DL | Chain .050″ →Chain .063″ → Bar · 3003 → |
| 25″ | 84 DL | Chain .050″ →Chain .063″ → Bar · 3003 → |
| 28″ | 91 DL | Chain .050″ →Chain .063″ → Bar · 3003 → |
Drive-link counts come from STIHL's saw-chain selection chart and depend on the bar mount as well as length. Pick the chain link that matches the gauge stamped on your bar. Bar searches include mount 3003 / D025; still confirm the mount stamp, pitch, gauge and drive-link count on your installed bar before ordering.
Drive-link counts: STIHL 2025 US catalog, saw chain selection, pp. 166-167; Oregon chain fit guide, STIHL section. Checked Nov 2026. How we check fitment
Files, oil & sharpening
Suggested match: Oregon 72 (.050″) / 73 (.058″) / 75 (.063″) series, e.g. 72/75 EXL. Match the gauge and confirm the drive-link count for your exact bar before ordering. These are equivalent aftermarket (Oregon) chains, not genuine STIHL chain — STIHL sells its own chain through its dealer network, and we're not affiliated with STIHL. New to fitment? See the bar-mount identification guide and chain & cutter guide.
Some links earn us a commission. It never changes the specs or what we recommend.
Factory tuning settings
| Idle speed | 2,800 rpm |
| Max speed | 13,500 rpm |
| L screw (low speed) | 1/4 turn |
| H screw (high speed) | 3/4 turn |
| LA screw (idle stop) | 1 1/2 turns |
| Confidence | sourced |
Screw figures are turns open from lightly seated. These are the figures every model in this family shares; an individual model page may be more specific. Set the final mixture by ear and tachometer against the machine in front of you — running a two-stroke lean to hit a published number is how pistons get scored.
Models in this family (2)
459 part numbers across 17 exploded views — the Diagrams column goes straight to them.
| Model | Years | Market | Rarity | Diagrams | Notes |
|---|---|---|---|---|---|
| MS 441 70.7 cc | 2007–12 | Global | Common | 17 | Higher output |
| MS 441 C-M 70.7 cc | 2011–19 | Global | Common / sought | 17 | M-Tronic, long overlap |
Service bulletins (8)
Running changes and fixes STIHL published for this engine family.
- TI 27/2010 Air filter, baffle; Muffler; Cooling plate; Manifold, carburetor bracket, preheater plate; Throttle trigger; Summary
- TI 1/2010 New chain saw STIHL MS 441 C-M
- TI 13/2009 Shroud, grommet; Summary
- TI 45/2008 Throttle cable, support; Fastening the generator; Flywheel, tightening torque; Summary
- TI 16/2008 Tank housing, hoses; Ground wire; Summary
- TI 45/2007 Housing, wiring harness, ground wire; Summary
- TI 25/2007 Carburetor; Crankcase; Air filter system; Summary
- TI 14/2006 New chain saws STIHL MS 441, MS 441 C-Q – Series 1138
Data confidence
Verify anything tagged estimated or approx against STIHL spec sheets.
Chain, bar and mount: family research from STIHL product pages, parts catalogues and collector records. Checked Jul 2026. How we check fitment
Something here wrong or missing for the MS 441? Report a correction →