← FS 360, FS 420, FS 420 L · FS 500, FS 550, FS 550 L

Stihl 4116 · Section C · 3 of 12 · 26 parts

Ignition system

Fits FS 360, FS 420, FS 420 L.

Parts diagrams →

Historical fitment & changes (6) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111212131415233031323334353637384567899
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (26)

PosPart numberDescriptionQty
1 4116 400 1200 Flywheel Fitment / change note → 1
2 9210 261 1140 Hexagon nut M8x1 1
3 0000 400 1300 Ignition module Fitment / change note → → replaced by 1122 400 1311, 0000 400 1305, 0000 400 1305 TI 51/1994 1
4 not sold separately Ignition lead 410 mm 1
5 4116 440 1100 Short circuit wire 160 mm / 6.3'' 1
6 0751 030 8957 Terminal socket 4.8-1/0.8 no longer available from factory 1
7 9291 021 0120 Washer 5.3 2
8 9022 371 1022 Spline screw IS-M5x20 2
9 4116 160 2001 Clutch Fitment / change note → 1
10 0000 997 1700 Tension spring Fitment / change note → 1
11 0000 961 0802 Ring Fitment / change note → 2
12 4116 162 1000 Cover washer Fitment / change note → 2
13 4116 162 4201 Hexagon head screw Fitment / change note → 2
14 4116 160 2900 Clutch drum Fitment / change note → 1
15 4116 084 7801 Segment Fitment / change note → 1
30 0000 961 0801 Ring 2
31 4116 182 7201 Guide piece 1
32 0000 958 0809 Washer Fitment / change note → 4
33 4116 182 7202 Guide piece 1
34 4116 431 2105 Double connector tag 1
35 9100 021 0810 Self-tapping screw 4.2x9.5 1
36 4116 431 2100 Connector tag 1
37 9074 478 4405 Pan head self-tapping screw IS-P6x14 1
38 4116 182 6800 Cover 1
Not numbered on the diagram — assemblies, kits and options
— 0000 405 0600 NLA Ignition lead 1 m option 1
— 0000 930 2251 Ignition lead 10 m option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · FS 360 / FS 420

FS 360 / FS 420: aluminium-flywheel ignition module split

The clearing-saw branch restores optimized 0000 400 1300; sharing a diagram does not extend the bulletin to FS 420 L or modern FS 360 variants.

Later reviewed guidance: FS 360 / FS 420: series 4116 replacement ignition assignment

  • TI22/1998 explicitly names FS 360 and FS 420 with aluminium flywheels. FS 420 L, FS 360 C, C-E and C-EM are not named and are not approved by this record.
  • The reactivated 0000 400 1300 number identifies the optimized aluminium-flywheel module here. The modified version has an integrated 400 mm (15 3/4 inch) ignition lead, no separate ignition lead and no short-circuit wire. The reused number alone does not distinguish all older constructions.
  • Use only 0000 400 1300 in this branch. Existing 0000 400 1305 stock permission is for eligible 046/066 saws, not these clearing saws. No numeric FS changeover is stated.
  • TI22/1998 reports isolated reliability problems with the former universal module on aluminium-flywheel machines. Different timing requirements led to two optimized modules; this is historical manufacturer field-test guidance, not a project hardware test.
  • Order only 0000 400 1300 or 1122 400 1314 according to the named model and restrictions. There is no automatic one-number replacement for 0000 400 1305.
  • The 02.98 microfiche/CD-ROM issue documents the future part numbers. Both summary rows say the original 0000 400 1305 is no longer available from the factory; that does not revoke the expressly permitted use of existing stocks on eligible 046/066 machines.
  • Introduction is in progress, without a new production cutoff. Factory availability is a 1998 statement, not current stock or proof of physical interchange.

Source: TI 22/1998, p. 1 · TI 22/1998, p. 2 — Sections 1–6: history, split, service note and ordering.

Part numbers (2)
  • 0000 400 1305 — Former universal ignition moduleEarlier recommendation · FS 360 and FS 420 only
  • 0000 400 1300 — Optimized aluminium-flywheel ignition moduleLater replacement · FS 360 and FS 420 only

Historical fitment · FS 360 / FS 420

FS 360 / FS 420: series 4116 replacement ignition assignment

0000 400 1300 with flywheel 4116 400 1200; 410 mm ignition lead.

  • Printed series 4116. Use 0000 400 1300 with flywheel 4116 400 1200.
  • Printed ignition-lead length: 410 mm (16 1/16 in). Preserve both printed units.
  • TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
  • Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
  • Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
  • Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
  • Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.
  • Unresolved length discrepancy: TI22/1998 describes the 0000 400 1300 integrated lead as 400 mm, while this table prints 410 mm (16 1/16 in) for FS 360 / FS 420. Preserve both; this is not a verified cutting instruction or an inferred supersession.

Source: TI 1/1999, p. 1 · TI 1/1999, p. 3 — 1.1 general restrictions and 1.2.2 power-tool assignments.

Part numbers (2)
  • 0000 400 1300 — Replacement ignition moduleAssigned component · FS 360 / FS 420, printed series 4116, listed combination only
  • 4116 400 1200 — Assigned flywheelRequired pairing · FS 360 / FS 420, printed series 4116

Service note · FS 360 / FS 420

FS 360 / FS 420: lined clutch returns; complete drum conversion required

Different drum diameters prohibit mixing lined and unlined clutch parts; replace the unlined clutch or drum as a complete assembly.

X 30 931 357 — FS 360 / FS 420 lined-clutch reintroduction; not special-version cutoff.

  • From X 30 931 357, unlined clutch 4116 160 2002 (introduced in TI 18/1994) is replaced by the original lined clutch 4116 160 2001. This return to an earlier design is not a rule that the numerically larger part is newer.
  • Individual parts of clutches WITH and WITHOUT linings CANNOT BE MIXED OR INSTALLED TOGETHER because the drum diameters differ. A complete clutch-with-drum 4116 160 2051 MUST replace either the unlined clutch OR its drum. Do not offer the new drum alone as an unlined-system repair.
  • Complete assembly 4116 160 2050 becomes 4116 160 2051, includes keys 1–2; clutch 4116 160 2002 becomes 4116 160 2001 (key 1); drum 4116 160 2900 is key 2. Each new row has MOQ 1. Original assembly and unlined clutch are no longer factory available; the original drum was NOT AVAILABLE SEPARATELY and has no printed number. All other parts remain as before. No drum diameter values or installation torque are printed.
  • Historical TI 48/1994 guidance, not current stock or verified physical interchange. Shared IPL sheets do not extend the named source models or variants. No hardware operation was performed.

Source: TI 48/1994, p. 1 — lined clutch returns; complete drum conversion required.

Part numbers (5)
  • 4116 160 2050 — Original unlined clutch with drumno longer factory available · FS 360 / FS 420 only in the configuration described here
  • 4116 160 2051 — Replacement lined clutch with drumincludes keys 1–2; MOQ 1 · FS 360 / FS 420 only in the configuration described here
  • 4116 160 2002 — Unlined clutch; key 1no longer factory available · FS 360 / FS 420 only in the configuration described here
  • 4116 160 2001 — Lined clutch; key 1MOQ 1 · FS 360 / FS 420 only in the configuration described here
  • 4116 160 2900 — Lined-system drum; key 2MOQ 1; not a stand-alone unlined conversion · FS 360 / FS 420 only in the configuration described here

Service note · FS 360 / FS 420

FS 360 / FS 420: spark plug terminal requires its new cover

The new terminal may only be used with the new cover; initial changeover uses the complete kit.

X 30 629 622 — FS 360 / FS 420 terminal/cover change only.

  • From X 30 629 622, old cover-shaped terminal 4116 405 1000 is replaced by terminal 1106 405 1000 and a separate cover. Terminal 1106 405 1000 CAN ONLY BE USED TOGETHER WITH THE NEW COVER. Initial changeover kit 4116 400 7150 includes keys 1–3: cover, mounting screw and terminal; MOQ 1.
  • Cover (key 1) has NO separate number and is NOT AVAILABLE SEPARATELY. Screw 9025 313 0741 is IS/slotted M4x25x10, key 2, MOQ 10; terminal 1106 405 1000 is key 3, MOQ 1. The prose calls the fastener M4x25; do not discard the table suffix or invent a torque. The threaded insert is integrally molded into the shroud and is not separately available according to this TI.
  • Leg spring 0000 998 0603 (key 4) is unchanged. Old cable clamp 4116 431 2500 (key 5), B3.9x16 screw 9099 021 2790 (key 6), IS M4x16 screw 4116 404 7800 (key 7) remain available as spares despite dashes in the new column. Old terminal lasts only while factory stocks remain. Blank MOQ cells remain unknown, not zero.
  • Figure 340TI002 shows old and new cover/terminal arrangements; it is not authority to fit the new terminal bare. The later shroud IPL lists a threaded insert 4116 084 6600, but this TI gives no insert number: exact identity with the molded insert is UNESTABLISHED. Preserve the historical non-separate-supply statement without treating the later row as proof of a safe retrofit.
  • Historical TI 48/1994 guidance, not current stock or verified physical interchange. Shared IPL sheets do not extend the named source models or variants. No hardware operation was performed.

Source: TI 48/1994, p. 3 · TI 48/1994, p. 4 — spark plug terminal requires its new cover.

Part numbers (8)
  • 4116 405 1000 — Original cover-shaped terminalwhile stocks last · FS 360 / FS 420 only in the configuration described here
  • 4116 400 7150 — Initial terminal changeover kitincludes 1–3; MOQ 1 · FS 360 / FS 420 only in the configuration described here
  • 9025 313 0741 — IS/slotted M4x25x10 screw; key 2MOQ 10 · FS 360 / FS 420 only in the configuration described here
  • 1106 405 1000 — Spark plug terminal; key 3MOQ 1; new cover required · FS 360 / FS 420 only in the configuration described here
  • 0000 998 0603 — Leg spring; key 4unchanged · FS 360 / FS 420 only in the configuration described here
  • 4116 431 2500 — Original cable clamp; key 5remains available as spare · FS 360 / FS 420 only in the configuration described here
  • 9099 021 2790 — Original B3.9x16 screw; key 6remains available as spare · FS 360 / FS 420 only in the configuration described here
  • 4116 404 7800 — Original IS M4x16 screw; key 7remains available as spare · FS 360 / FS 420 only in the configuration described here

Service note · FS 550 / FS 360 / FS 420

FS 550: guide assembly, clutch and fuel-system spares

Guide includes its cover and screw; the two hoses retain different numbers.

  • Guide item 7 INCLUDES cover 8 and self-tapping screw 9, IS P4x16. Do not confuse this fuel-system grommet 15 with ignition grommet 6. Hoses 14 and 16 have different part numbers; no hose dimensions or routing are supplied by the summary.
  • Remark 1 extends ONLY clutch drum 10, segment 11 and tank housing 12 in this group to predecessor FS 360/FS 420. No predecessor-fitment remark is printed for guide 7, cover 8, screw 9, pump 13, hoses 14/16, grommet 15 or HD 22 carburetor 17. The carburetor row is not an HD 23 equivalence statement.
  • Historical TI 44/1997 source guidance, not current availability, verified physical interchange or a complete repair procedure. Shared IPL sheets do not extend claims to unnamed variants. No hardware operation was performed.

Source: TI 44/1997, p. 10 — Section7 rows7–17 and remark1.

Part numbers (11)
  • 4116 180 7200 — Item7 guide including8 and9Exact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 182 6801 — Item8 coverExact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 9074 478 3025 — Item9 self-tapping screw IS P4x16Exact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 160 2900 — Item10 clutch drum; remark1Exact section7 row; inclusions and remarks retained · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
  • 4116 084 7801 — Item11 segment; remark1Exact section7 row; inclusions and remarks retained · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
  • 4116 350 0806 — Item12 tank housing; remark1Exact section7 row; inclusions and remarks retained · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
  • 4130 350 6200 — Item13 fuel pumpExact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 358 7602 — Item14 hoseExact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4133 353 9201 — Item15 grommetExact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 358 7601 — Item16 hoseExact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 120 0603 — Item17 carburetor HD22Exact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row

Conditional replacement · FS 360 / FS 420 / FS 500 / FS 550

FS 360 / FS 420 / FS 500 / FS 550: clutch cover plates

From printed serial 1 43 596 645, two cover plates replace four washers; clutch order number 4116 160 2001 stays unchanged.

  • Section 2 applies to FS 500 and FS 550 and explicitly also FS 360 and FS 420. Modified clutch 4116 160 2001 is introduced from printed serial 1 43 596 645. No separate model-specific serial, inferred manufacture date or L-variant approval is supplied.
  • Two cover plates 4116 162 1000 are fitted in front of and behind the clutch shoes instead of four washers 0000 958 0809. Drawing 398TI018 KN shows plate 4 on each face and old washer callout 6 at both ends, with mounting screw 5. This is replacement, not an instruction to stack both configurations.
  • The replacement clutch is supplied complete with cover plates and mounting screws for easier installation. The two item-1 rows retain order number 4116 160 2001 but change included contents from items 2 and 3 to items 2–5. Spring 0000 997 1700, ring 0000 961 0802 and screw 4116 162 4201 keep their numbers; no new clutch order number is fabricated.
  • Remark 1 says the previous clutch version is no longer available from factory. Remark 2 says the previous washers remain available, despite dashes in the new column. These remarks do not approve using the old washers together with the new plates. No tightening torque or complete clutch service procedure is given.
  • Historical TI34/1999 evidence only; availability and performance claims are dated source statements, not current stock or measured performance. Grouped IPL navigation does not add FS 550 L or other unlisted variants. No hardware operation or physical interchange verification.

Source: TI 34/1999, p. 3 — FS 360 / FS 420 / FS 500 / FS 550: clutch cover plates; complete relevant text, drawings and table rows.

Part numbers (6)
  • 4116 160 2001 — ClutchSame order number; old items 2–3, new items 2–5 · FS 360 / FS 420 / FS 500 / FS 550
  • 0000 997 1700 — Clutch springUnchanged; item 2 · Specified clutch
  • 0000 961 0802 — RingUnchanged; item 3 · Specified clutch
  • 4116 162 1000 — Cover plate, twoNew; item 4 · Specified clutch
  • 4116 162 4201 — Hexagon head screwUnchanged; item 5 · Specified clutch
  • 0000 958 0809 — Washer, fourDeleted from new clutch configuration; remains available · Previous specified clutch configuration

Wrong number or missing part for the FS 360, FS 420, FS 420 L? Report a correction →