← FS 360, FS 420, FS 420 L · FS 500, FS 550, FS 550 L

Stihl 4116 · Section C · 3 of 16 · 23 parts

Ignition system, Clutch

Fits FS 500, FS 550, FS 550 L.

Parts diagrams →

Historical fitment & changes (7) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213131415161617181922021213445689
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (23)

PosPart numberDescriptionQty
1 4116 400 1200 Flywheel Fitment / change note → 1
2 9210 261 1140 Hexagon nut M8x1 1
3 4116 400 1306 Ignition module Fitment / change note → 1
4 not sold separately Ignition lead 410 mm 1
5 0000 989 1010 Grommet Fitment / change note → 1
6 4116 440 1100 Short circuit wire 160 mm / 6.3'' 1
8 9022 341 1019 Spline screw IS-M5x20 2
9 0000 998 0603 Torsion spring → replaced by 0000 998 0604 TI 30/1995 1
10 1106 405 1000 Spark plug boot → replaced by 1128 405 1000, 1128 405 1000 TI 30/1995 1
11 9025 313 0741 Spline screw M4x25 1
12 not sold separately Cover not available as a separate item 1
13 4116 160 2001 Clutch Fitment / change note → 1
14 0000 997 1700 Tension spring Fitment / change note → 1
15 0000 961 0802 Ring Fitment / change note → 2
16 4116 162 1000 Cover washer Fitment / change note → 2
17 4116 162 4201 Hexagon head screw Fitment / change note → 2
18 4116 084 7801 Segment Fitment / change note → 1
19 4116 160 2900 Clutch drum Fitment / change note → 1
20 9291 021 0120 Washer 5.3 2
21 0000 958 0809 Washer Fitment / change note → 4
Not numbered on the diagram — assemblies, kits and options
— 0000 405 0600 NLA Ignition lead 1 m option 1
— 0000 930 2251 Ignition lead 10 m option 1
— 4116 400 7150 Spark plug boot 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · FS 500 / FS 550

FS 500 / FS 550: series 4116 replacement ignition assignment

4116 400 1306 with flywheel 4116 400 1200; 410 mm ignition lead.

  • Printed series 4116. Use 4116 400 1306 with flywheel 4116 400 1200.
  • Printed ignition-lead length: 410 mm (16 1/16 in). Preserve both printed units.
  • TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
  • Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
  • Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
  • Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
  • Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.

Source: TI 1/1999, p. 1 · TI 1/1999, p. 3 — 1.1 general restrictions and 1.2.2 power-tool assignments.

Part numbers (2)
  • 4116 400 1306 — Replacement ignition moduleAssigned component · FS 500 / FS 550, printed series 4116, listed combination only
  • 4116 400 1200 — Assigned flywheelRequired pairing · FS 500 / FS 550, printed series 4116

Service note · FS 550

FS 550: engine limits, single-pawl starter and ElastoStart

56.5 cc engine; 12,500 rpm cut-off without a cutting tool is not the rated output-shaft speed.

  • Engine: displacement 3.45 cu.in (56.5 cc), bore 1.81 in (46 mm), stroke 1.34 in (34 mm), power to ISO 8893 of 3.8 bhp (2.8 kW). These FS 550 specifications do not resolve the separate 44 mm/46 mm spare-cylinder rows on page 10 or establish a bore-conversion approval.
  • Idle is 2,500 rpm; clutch engages at 3,250 rpm. ELECTRONIC CUT-OFF WITHOUT CUTTING TOOL is 12,500 rpm (+/- 800 rpm). Maximum RATED OUTPUT-SHAFT speed is 9,400 rpm. Keep crankshaft/cut-off and output-shaft speeds distinct; the no-tool test condition is not authorization to run a machine unattended.
  • The rewind starter uses a SINGLE PAWL and ElastoStart grip. Starter rope diameter is 0.14 in (3.5 mm); no rope length or part number is supplied in these sections. Easy start combines a decompression valve, ElastoStart grip and MANUAL FUEL PUMP; this is not a claim for a later spring-assisted starting system.
  • Historical TI44/1997 guidance for the named FS 550 configuration only. Shared IPL sheets do not extend these claims to FS 500, FS 550 L, FS 360 or FS 420. Not current stock, verified physical interchange or a complete operating procedure. No hardware operation was performed.

Source: TI 44/1997, p. 1 · TI 44/1997, p. 2 · TI 44/1997, p. 3 — Section 1 cylinder/easy start and section 2.1.1 full engine specification.

No additional parts-table entry added.

Service note · FS 550

FS 550: limited ignition, 410 mm lead and specified weight

Three suppressed spark plugs are named; 9.8 kg excludes the cutting tool and deflector.

  • The ignition module has an integral electronic speed limiter. Ignition lead length is 410 mm (16.14 in). Suppressed spark-plug alternatives are Bosch WSR 6F, NGK BPMR 7 A or Champion RCJ 6Y. No electrode gap, plug tightening torque or universal ignition-module replacement is stated here.
  • Weight is 21.6 lb (9.8 kg), explicitly WITHOUT CUTTING TOOL AND DEFLECTOR. Do not present it as fully equipped working weight or silently add a dry/fuel condition not stated in this row.
  • Historical TI44/1997 guidance for the named FS 550 configuration only. Shared IPL sheets do not extend these claims to FS 500, FS 550 L, FS 360 or FS 420. Not current stock, verified physical interchange or a complete operating procedure. No hardware operation was performed.

Source: TI 44/1997, p. 2 · TI 44/1997, p. 5 · TI 44/1997, p. 6 — Section 1 ignition; section 2.1.3 and complete section 2.3 weight row.

No additional parts-table entry added.

Service note · FS 550 / FS 360 / FS 420

FS 550 TI 44: 44 mm and 46 mm cylinder rows remain distinct

The new-spares table lists both bores; it does not approve a bore conversion.

  • Items 1–6 retain the exact numbers shown below. Ignition module item 5 INCLUDES grommet item 6. No inclusion of the decompression valve in either cylinder assembly is explicitly stated.
  • The FS 550 specification on page 3 says 46 mm bore, yet the page 10 table lists BOTH 44 mm and 46 mm cylinder-with-piston assemblies. Preserve both entries without calling the 44 mm assembly the FS 550 production cylinder or approving a displacement conversion. The table does not explain this model-allocation ambiguity.
  • Remark 1 explicitly makes items 1, 2, 3 spare parts for predecessor FS 360 and FS 420 as well. It does NOT attach to items 4, 5, 6. This is a scoped source assertion, not proof that either cylinder can replace every predecessor cylinder without other changes.
  • Historical TI 44/1997 source guidance, not current availability, verified physical interchange or a complete repair procedure. Shared IPL sheets do not extend claims to unnamed variants. No hardware operation was performed.

Source: TI 44/1997, p. 3 · TI 44/1997, p. 10 — Section7 rows1–6 and remark1, compared with section2.1.1 specification.

Part numbers (6)
  • 4116 020 2116 — Item1 crankcase; remark1New-spares table; bore/model restriction retained · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
  • 4116 020 1203 — Item2 cylinder with piston44 mm; remark1New-spares table; bore/model restriction retained · 44 mm table entry; FS 550 production allocation unresolved against46 mm specification; remark1 names FS 360/FS 420; no bore conversion approval
  • 4116 020 1215 — Item3 cylinder with piston46 mm; remark1New-spares table; bore/model restriction retained · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
  • 1128 020 9400 — Item4 decompression valveNew-spares table; bore/model restriction retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 400 1306 — Item5 ignition module including item6New-spares table; bore/model restriction retained · FS 550 table context; no separate predecessor remark on this row
  • 0000 989 1010 — Item6 grommetNew-spares table; bore/model restriction retained · FS 550 table context; no separate predecessor remark on this row

Service note · FS 550 / FS 360 / FS 420

FS 550: guide assembly, clutch and fuel-system spares

Guide includes its cover and screw; the two hoses retain different numbers.

  • Guide item 7 INCLUDES cover 8 and self-tapping screw 9, IS P4x16. Do not confuse this fuel-system grommet 15 with ignition grommet 6. Hoses 14 and 16 have different part numbers; no hose dimensions or routing are supplied by the summary.
  • Remark 1 extends ONLY clutch drum 10, segment 11 and tank housing 12 in this group to predecessor FS 360/FS 420. No predecessor-fitment remark is printed for guide 7, cover 8, screw 9, pump 13, hoses 14/16, grommet 15 or HD 22 carburetor 17. The carburetor row is not an HD 23 equivalence statement.
  • Historical TI 44/1997 source guidance, not current availability, verified physical interchange or a complete repair procedure. Shared IPL sheets do not extend claims to unnamed variants. No hardware operation was performed.

Source: TI 44/1997, p. 10 — Section7 rows7–17 and remark1.

Part numbers (11)
  • 4116 180 7200 — Item7 guide including8 and9Exact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 182 6801 — Item8 coverExact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 9074 478 3025 — Item9 self-tapping screw IS P4x16Exact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 160 2900 — Item10 clutch drum; remark1Exact section7 row; inclusions and remarks retained · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
  • 4116 084 7801 — Item11 segment; remark1Exact section7 row; inclusions and remarks retained · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
  • 4116 350 0806 — Item12 tank housing; remark1Exact section7 row; inclusions and remarks retained · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
  • 4130 350 6200 — Item13 fuel pumpExact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 358 7602 — Item14 hoseExact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4133 353 9201 — Item15 grommetExact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 358 7601 — Item16 hoseExact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 120 0603 — Item17 carburetor HD22Exact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row

Service note · FS 550 / FS 360 / FS 420

FS 550 / FS 360 / FS 420: same-number clutch, nine-turn spring

Eight-turn spring stocks are reserved for original clutches; the changeover is only described as in progress.

  • Section 2 changes clutch-shoe shape for production reasons. Clutch 4116 160 2001 and the FS 360/420 clutch-with-drum 4116 160 2051 keep their assembly numbers. Each contains the spring and shoes. A matching assembly number alone cannot identify which clutch revision is installed.
  • New spring 0000 997 1700 has NINE turns, replacing eight-turn 0000 997 1703. Drawing 398TI013 SC shows original eight-turn spring LEFT and new nine-turn spring RIGHT. Existing old-spring stocks may be used up ON MACHINES WITH THE ORIGINAL CLUTCH; no mixed-revision spring/shoe permission is stated.
  • The prose says only modified assemblies will be available when the change comes on line. Table remark 1 still permits unmodified assemblies for a temporary period, and remark 2 permits old springs only while stocks last. These are transitional statements, not a contradiction to erase or a present-day availability promise.
  • The summary gives introduction as IN PROGRESS, not a serial number. Clutch shoes are not available separately (remark 3); both shoe columns show -*-. All other parts remain as before. The later FS 500/550/550 L ignition/clutch sheet contains 4116 160 2001 and 0000 997 1700; it does not prove the historical state of any individual clutch.
  • Historical TI49/1998 only, not current stock or physical interchange verification. Shared catalog sheets do not extend these instructions to FS 500, FS 550 L, FS 420 L or other models. The throttle cutoff is not a clutch, fuel-hose or handlebar cutoff.

Source: TI 49/1998, p. 2 · TI 49/1998, p. 3 — FS 550 / FS 360 / FS 420: same-number clutch, nine-turn spring.

Part numbers (4)
  • 4116 160 2001 — Clutch, unchanged assembly numberOriginal and modified versions · FS 550/FS 360/FS 420; exact TI49/1998 version and conditions only
  • 4116 160 2051 — Clutch with drum for FS 360/420Original and modified versions · FS 550/FS 360/FS 420; exact TI49/1998 version and conditions only
  • 0000 997 1703 — Original eight-turn clutch springOriginal clutch only · FS 550/FS 360/FS 420; exact TI49/1998 version and conditions only
  • 0000 997 1700 — New nine-turn clutch springModified clutch · FS 550/FS 360/FS 420; exact TI49/1998 version and conditions only

Conditional replacement · FS 360 / FS 420 / FS 500 / FS 550

FS 360 / FS 420 / FS 500 / FS 550: clutch cover plates

From printed serial 1 43 596 645, two cover plates replace four washers; clutch order number 4116 160 2001 stays unchanged.

  • Section 2 applies to FS 500 and FS 550 and explicitly also FS 360 and FS 420. Modified clutch 4116 160 2001 is introduced from printed serial 1 43 596 645. No separate model-specific serial, inferred manufacture date or L-variant approval is supplied.
  • Two cover plates 4116 162 1000 are fitted in front of and behind the clutch shoes instead of four washers 0000 958 0809. Drawing 398TI018 KN shows plate 4 on each face and old washer callout 6 at both ends, with mounting screw 5. This is replacement, not an instruction to stack both configurations.
  • The replacement clutch is supplied complete with cover plates and mounting screws for easier installation. The two item-1 rows retain order number 4116 160 2001 but change included contents from items 2 and 3 to items 2–5. Spring 0000 997 1700, ring 0000 961 0802 and screw 4116 162 4201 keep their numbers; no new clutch order number is fabricated.
  • Remark 1 says the previous clutch version is no longer available from factory. Remark 2 says the previous washers remain available, despite dashes in the new column. These remarks do not approve using the old washers together with the new plates. No tightening torque or complete clutch service procedure is given.
  • Historical TI34/1999 evidence only; availability and performance claims are dated source statements, not current stock or measured performance. Grouped IPL navigation does not add FS 550 L or other unlisted variants. No hardware operation or physical interchange verification.

Source: TI 34/1999, p. 3 — FS 360 / FS 420 / FS 500 / FS 550: clutch cover plates; complete relevant text, drawings and table rows.

Part numbers (6)
  • 4116 160 2001 — ClutchSame order number; old items 2–3, new items 2–5 · FS 360 / FS 420 / FS 500 / FS 550
  • 0000 997 1700 — Clutch springUnchanged; item 2 · Specified clutch
  • 0000 961 0802 — RingUnchanged; item 3 · Specified clutch
  • 4116 162 1000 — Cover plate, twoNew; item 4 · Specified clutch
  • 4116 162 4201 — Hexagon head screwUnchanged; item 5 · Specified clutch
  • 0000 958 0809 — Washer, fourDeleted from new clutch configuration; remains available · Previous specified clutch configuration

Wrong number or missing part for the FS 500, FS 550, FS 550 L? Report a correction →