← FS 360, FS 420, FS 420 L · FS 500, FS 550, FS 550 L

Stihl 4116 · Section D · 4 of 16 · 24 parts

Tank housing

Fits FS 500, FS 550, FS 550 L.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202122233456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (24)

PosPart numberDescriptionQty
1 4116 350 0807 Tank housing 1
2 4116 122 6600 Collar screw 2
3 9443 825 7130 Hollow rivet 7.5x1x6.8 7
4 9771 021 2620 Hose clip Ø 36x5 1
5 4116 141 2202 Manifold 1
6 1121 647 9400 Impulse hose 1
7 1119 141 1800 Sleeve 1
8 1119 121 8600 Washer 1
9 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 3
10 4116 120 0606 Carburetor HD-31 1
10 4116 120 0602 Carburetor HD-23 1
11 4116 120 0603 Carburetor HD-22 Fitment / change note → 1
12 4130 350 6200 Fuel pump Fitment / change note → → replaced by 4128 120 0100 TI 6/2009 1
13 4116 358 7602 Hose Fitment / change note → 1
14 4116 358 7702 Hose 1
15 0000 350 3502 Pickup body 1
16 4116 121 0600 Support plate 1
17 9210 260 0700 Hexagon nut M5 2
18 9074 478 4425 Pan head self-tapping screw IS-P6x19 2
19 4116 350 0502 Filler cap Fitment / change note → 1
20 0000 350 0900 Rope Fitment / change note → 1
21 0000 353 0600 Hook Fitment / change note → 1
22 0000 989 0511 Grommet 1
23 0000 967 3693 Warning pictogram Filler cap 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 550 / FS 360 / FS 420

FS 550: guide assembly, clutch and fuel-system spares

Guide includes its cover and screw; the two hoses retain different numbers.

  • Guide item 7 INCLUDES cover 8 and self-tapping screw 9, IS P4x16. Do not confuse this fuel-system grommet 15 with ignition grommet 6. Hoses 14 and 16 have different part numbers; no hose dimensions or routing are supplied by the summary.
  • Remark 1 extends ONLY clutch drum 10, segment 11 and tank housing 12 in this group to predecessor FS 360/FS 420. No predecessor-fitment remark is printed for guide 7, cover 8, screw 9, pump 13, hoses 14/16, grommet 15 or HD 22 carburetor 17. The carburetor row is not an HD 23 equivalence statement.
  • Historical TI 44/1997 source guidance, not current availability, verified physical interchange or a complete repair procedure. Shared IPL sheets do not extend claims to unnamed variants. No hardware operation was performed.

Source: TI 44/1997, p. 10 — Section7 rows7–17 and remark1.

Part numbers (11)
  • 4116 180 7200 — Item7 guide including8 and9Exact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 182 6801 — Item8 coverExact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 9074 478 3025 — Item9 self-tapping screw IS P4x16Exact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 160 2900 — Item10 clutch drum; remark1Exact section7 row; inclusions and remarks retained · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
  • 4116 084 7801 — Item11 segment; remark1Exact section7 row; inclusions and remarks retained · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
  • 4116 350 0806 — Item12 tank housing; remark1Exact section7 row; inclusions and remarks retained · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
  • 4130 350 6200 — Item13 fuel pumpExact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 358 7602 — Item14 hoseExact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4133 353 9201 — Item15 grommetExact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 358 7601 — Item16 hoseExact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row
  • 4116 120 0603 — Item17 carburetor HD22Exact section7 row; inclusions and remarks retained · FS 550 table context; no separate predecessor remark on this row

Historical fitment · FS 160 / FS 180 / FS 220 / FS 280 / FS 360 / FS 420 / FS 550

FS 160–550 named models: two-filter fuel cap and restricted spare-part supply

Complete cap replacement includes seven items; only cord and hook remain separate for the new version.

  • For FS 550, present fuel filler cap 4116 350 0501 is to be replaced in the FORESEEABLE FUTURE by 4116 350 0502; introduction remains IN PROGRESS. The new cap is ALSO a replacement for FS 160, FS 180, FS 220, FS 280, FS 360 and FS 420. This is an exact named-model list, NOT a continuous FS 160–550 range, and does not add K/L variants, FS 290, FS 500 or FR 220 from shared sheets or reused part numbers.
  • Figure 398TI010 KN shows TWO filters of SINTERED material with arrows to the two filter positions. Figure 398TI011 KN shows items 1–7 and the cord/hook routing: sealing ring (1), upper filter (2), valve (3), tank vent (4), lower filter (5), cord (6) and hook (7). It does not provide filter pore size, pressure limits, fabrication dimensions or a complete overhaul procedure.
  • To simplify stockkeeping and avoid assembly errors, only the COMPLETE NEW CAP and its separate CORD / HOOK are supplied as replacement parts. Cap 4116 350 0502 includes items 1–7. Original cap 4116 350 0501 is supplied only WHILE EXISTING STOCKS LAST (remark 1); this is not current availability.
  • Items 1–3 retain their ORIGINAL spare numbers 0000 992 7101 sealing ring, 0000 358 1810 filter and 4114 353 1600 valve under remark 2. Each NEW-version column is -*- with remark 3: NOT AVAILABLE SEPARATELY. Original cap-retainer assembly 4116 350 0900 likewise remains an ORIGINAL spare (remark 2), but the NEW retainer assembly is not separately supplied (remark 3). These retained old spares are not declared suitable to rebuild the new cap.
  • Tank vent item 4 has -*- in BOTH columns and remark 3; filter item 5 has --- original and -*- new with remark 3. No standalone part number is given for either new item, and none is invented. The footnote defines * as not separately available. Cord 0000 350 0900 and hook 0000 353 0600 have the SAME numbers in both columns and no numbered remark; they are the separately supplied new-cap retainer components. Do not confuse complete retainer 4116 350 0900 with cord 0000 350 0900.
  • All four exact-model tank-housing sheets retain cap 4116 350 0502 plus cord and hook. No variant expansion or IPL-row rewrite follows. Last TI44.97 is a bibliographic pointer, not a missing prerequisite for this self-contained cap replacement.
  • No hardware operation was performed. Historical factory supply is not current stock or verified physical interchange.

Source: TI 33/1998, p. 2 — Section 2 complete: two sintered filters, exact replacement models, complete-cap supply, exploded items 1–7, retainer rows, all remarks and footer.

Part numbers (8)
  • 4116 350 0501 — Original complete fuel filler capWhile stocks last · Only the seven named FS models; new cap versus original spares distinguished
  • 4116 350 0502 — New fuel filler cap including items 1–7Complete replacement · Only the seven named FS models; new cap versus original spares distinguished
  • 0000 992 7101 — Original sealing ring, item 1Original spare retained; new version not separate · Only the seven named FS models; new cap versus original spares distinguished
  • 0000 358 1810 — Original filter, item 2Original spare retained; new version not separate · Only the seven named FS models; new cap versus original spares distinguished
  • 4114 353 1600 — Original valve, item 3Original spare retained; new version not separate · Only the seven named FS models; new cap versus original spares distinguished
  • 4116 350 0900 — Original cap retainer assembly including 6 and 7Original spare retained; new assembly not separate · Only the seven named FS models; new cap versus original spares distinguished
  • 0000 350 0900 — Cord, item 6Unchanged; separate spare · Only the seven named FS models; new cap versus original spares distinguished
  • 0000 353 0600 — Hook, item 7Unchanged; separate spare · Only the seven named FS models; new cap versus original spares distinguished

Wrong number or missing part for the FS 500, FS 550, FS 550 L? Report a correction →