Stihl 4128 · Section B · 2 of 21 · 23 parts
Rewind starter
Fits FS 400, FS 450, FS 480.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (23)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4128 080 1801 | Fan housing | 1 |
| 2 | 1110 084 9102 | Bushing | 1 |
| 3 | 4134 190 0601 | Rewind spring | 1 |
| 4 | 4128 195 0400 | Rope rotor | 1 |
| 5 | 0000 190 3405 | Starter grip ElastoStart Ø 3 mm | 1 |
| 6 | 0000 195 7000 | Cap | 1 |
| 7 | 0000 195 8203 | Starter rope Ø 3x850 mm | 1 |
| 8 | 0000 195 7200 | Pawl | 1 |
| 9 | 0000 958 0923 | Washer | 1 |
| 10 | 1118 195 3500 | Spring | 1 |
| 11 | 9104 003 0410 | Self-tapping screw P3x6 | 2 |
| 12 | 4223 084 5600 | Screw | 1 |
| 13 | 4134 190 0600 NLA | Rewind spring → replaced by 4134 190 0601 TI 22/2001 | 1 |
| 14 | 0000 190 3400 | Starter grip ElastoStart Ø 3 mm Fitment / change note → → replaced by 0000 190 3403, 0000 190 3403 TI 42/1999 | 1 |
| 15 | 0000 195 8200 | Starter rope Ø 3x800 mm Fitment / change note → | 1 |
| 16 | 4116 195 7200 | Pawl | 1 |
| 17 | 9099 021 2330 NLA | Self-tapping screw 3.5x6.5 | 1 |
| 18 | 0000 967 1500 | Nameplate STIHL | 1 |
| 19 | 4128 967 1505 | Model plate FS 400 | 1 |
| 20 | 4128 967 1506 | Model plate FS 450 | 1 |
| 21 | 4128 967 1510 | Model plate FS 480 | 1 |
| 22 | 0000 951 1100 | Screw IS-D5x20 | 4 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4128 080 2101 | Fan housing with rewind starter | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FS 120 / FS 200 / FS 350 / FS 400 / FS 450
FS120/200/350/400/450: ElastoStart grip and separate rope
Section4 resolves the engine-table starter-rope reference.
- Page3 engine-table starter-rope entries all say SEE4. Section4 lists ElastoStart grip0000 190 3400 for the rewind starter, explicitly GRIP WITH ROPE; separate ElastoStart rope0000 195 8200 is also listed for the rewind starter.
- This bulletin gives no rope diameter/length, grip contents beyond the rope, winding count or replacement procedure. Do not import dimensions from another bulletin/model simply because an order number matches. Single-pawl starter construction remains the page3 specification.
- Historical TI42/1997 configurations and listed combinations only; not blanket approval for later variants, present stock or verified physical interchange. No hardware operation was performed.
Source: TI 42/1997, p. 3 · TI 42/1997, p. 6 — Section2.1.1 starter-rope delegation and section4 complete ElastoStart rows.
Part numbers (2)
- 0000 190 3400 — ElastoStart grip with ropeHistorical approved tool or listed accessory · Named TI42/1997 rewind starters
- 0000 195 8200 — Separate ElastoStart ropeHistorical approved tool or listed accessory · Named TI42/1997 rewind starters
Wrong number or missing part for the FS 400, FS 450, FS 480? Report a correction →