Stihl 4130 · Section C · 3 of 9 · 35 parts
Muffler, Shroud
Fits FC 44.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (35)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4130 140 0605 | Muffler | 1 |
| 1 | 4130 140 0600 | Muffler | 1 |
| 2 | 4130 141 9000 | Screen | 1 |
| 3 | 4130 145 3000 NLA | Screen frame | 1 |
| 4 | 9099 021 2360 | Self-tapping screw 3.5x9.5 | 2 |
| 5 | 4130 149 0600 | Muffler gasket | 1 |
| 6 | 9075 478 4265 | Pan head self-tapping screw IS-D5x60 | 4 |
| 7 | 4130 129 0900 | Gasket | 1 |
| 8 | 4130 120 0601 | Carburetor WT-160B | 1 |
| 8 | 4130 120 0603 | Carburetor WT-492A | 1 |
| 9 | 4130 123 7300 | Lever | 1 |
| 10 | 4130 350 0404 | Fuel tank | 1 |
| 11 | 4130 358 0700 | Hose | 1 |
| 12 | not sold separately | Hose 2.2x5.4x35 mm, R1 not available as a separate item | 1 |
| 13 | 0000 350 3502 | Pickup body | 1 |
| 14 | 4223 353 9201 | Grommet | 1 |
| 15 | 4223 350 5802 | Tank vent | 1 |
| 16 | 0000 989 0516 | Grommet | 2 |
| 17 | 4130 350 0507 | Filler cap | 1 |
| 18 | 0000 350 0900 | Rope | 1 |
| 19 | 0000 353 0600 | Hook | 1 |
| 20 | 0000 359 1240 | Sealing ring | 1 |
| 21 | not sold separately | Hose 3.1x5.7x110 mm, R3 not available as a separate item | 1 |
| 22 | 1122 353 9100 | Connector | 1 |
| 23 | 4114 353 1600 | Valve → replaced by 1128 353 1600 TI 25/1996 | 1 |
| 24 | 4130 350 6200 | Fuel pump → replaced by 4128 120 0100 TI 6/2009 | 1 |
| 25 | not sold separately | Hose 2.2x5.4x85 mm, R1 not available as a separate item | 1 |
| 26 | 4130 180 1101 | Throttle cable | 1 |
| 27 | 4130 084 0901 | Shroud | 1 |
| 28 | 9075 478 4155 | Pan head self-tapping screw IS-D5x24 | 4 |
| 29 | 4130 124 0800 | Filter | 1 |
| 30 | 4130 141 0500 | Filter cover | 1 |
| 31 | 4130 141 8100 | Screw | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 930 2802 | Hose 2.2x5.4 mm x 1 m, R1 not illustratedoption | 1 |
| — | 0000 930 2803 | Hose 3.1x5.7 mm x 1 m, R3 not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FC 44
FC 44: engine construction and intended use
30.2 cm³ occasional-use edger uses the FS36/40/44 engine design; 6.2 kg includes its blade.
- Designed for occasional users edging small/medium plots, grass borders around fields, lawns, flowerbeds and trees. Adjustable loop handle permits upright working position. Weight 6.2 kg (13.7 lb) WITH CUTTING BLADE; fuel condition unspecified. Engine 30.2 cm³ (1.84 cu.in), 34.8 mm bore, 31.8 mm stroke; output 0.7 kW (0.95 HP) to ISO8893.
- Compact single-cylinder two-stroke described as identical to FS36/40/44 engine. One-piece aluminium die-cast crankcase open at carburetor side, flange-mounted diaphragm carrier; special-aluminium cylinder with impregnated bore and aluminium piston with ONE compression ring. Crankshaft ball bearings; big/small ends use needle cages. No complete engine interchange procedure inferred.
- Smooth surfaces aid cleaning; housing reduces contact with hot parts. Exhaust and heated cooling air discharge rearward away from operator; large-volume muffler plus intake-air silencing. Sealed electronic ignition described as maintenance-free, not exemption from all checks. Illustrations show complete edger/use context, not dimensional or mounting templates.
- Historical TI 24/1994 for FC44 only; shared-engine or design-principle comparisons are not universal loose-part interchange. No serial cutoff supplied. Source date November 10, 1994; referenced manuals are not whole-manual acceptance. Owner-manual precautions remain required. No physical interchange test was performed.
Source: TI 24/1994, p. 1 · TI 24/1994, p. 2 · TI 24/1994, p. 4 · TI 24/1994, p. 5 — engine construction and intended use.
No additional parts-table entry added.
Service note · FC 44
FC 44: fuel mixture, choke and carburetor test conditions
Walbro WT160 basic settings and blade-free cutoff speed retain their exact conditions.
- Diaphragm-controlled Walbro WT160, flange-mounted to diaphragm carrier, has max-speed control valve and integral fuel pump. Manual pump primes carburetor before start; surplus fuel returns automatically to tank. Tank 0.51 L (1.1 US pt). Historical fuel instruction: brand-name regular gasoline unleaded OR leaded; 50:1 with STIHL1:50 oil, 25:1 with OTHER branded two-stroke oils. Do not collapse to one universal oil ratio.
- Ring-shaped foam filter 1; cover 2 rotates choke shutter between end-stop-defined RUN/CHOKE. FS44-type controls: stop slide 3, trigger interlock 4, trigger housing 5, trigger/latch 6. Starting-throttle position engages latch in housing notch. These are source controls, not permission to actuate unattended.
- Basic H and L settings EACH back off ONE FULL TURN; printed parenthesis says screws initially HARD AGAINST THEIR SEATS. Preserve wording as historical reference, not a recommendation to force/torque delicate needles. No seating torque or complete live-tuning procedure is supplied.
- Max permissible cut-off speed 9300 rpm ±700 WITHOUT CUTTING BLADE, not loaded working speed. Idle 3100 rpm. Carburetor leakage closing pressure 0.8 bar (11.6 psi). Crankcase test 0.5 bar (7.25 psi) GAUGE pressure and 0.4 bar (5.8 psi) UNDER VACUUM; latter is vacuum magnitude, not a second positive pressure. No test duration/leakdown limit given.
- Historical TI 24/1994 for FC44 only; shared-engine or design-principle comparisons are not universal loose-part interchange. No serial cutoff supplied. Source date November 10, 1994; referenced manuals are not whole-manual acceptance. Owner-manual precautions remain required. No physical interchange test was performed.
Source: TI 24/1994, p. 2 · TI 24/1994, p. 3 · TI 24/1994, p. 4 · TI 24/1994, p. 5 · TI 24/1994, p. 6 — fuel mixture, choke and carburetor test conditions.
No additional parts-table entry added.
Wrong number or missing part for the FC 44? Report a correction →