← FS 25-4, FS 65-4

Stihl 4170 · Section L · 11 of 14 · 29 parts

Gear head, Drive tube assembly

Fits FS 25-4, FS 65-4.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213151617181922202121222323242526273456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (29)

PosPart numberDescriptionQty
1 4130 641 0305 Gear housing 1
2 9503 003 9850 Grooved ball bearing 609 → replaced by 9503 003 9853 TI 46/2000 2
3 not sold separately Drive pinion not available as a separate item 1
4 not sold separately Spur bevel gear not available as a separate item 1
5 4130 642 0601 Drive shaft 1
6 9503 003 5190 Grooved ball bearing 6001-2RS 1
7 9456 621 3100 Circlip 28x1.2 1
8 9503 003 9853 Grooved ball bearing 609-2Z 1
9 9455 621 0750 Circlip 9x1 1
10 9456 621 2660 Circlip 24x1.2 1
11 4119 713 6500 Screw plug 1
12 4137 710 3800 Thrust plate 1
13 not sold separately Guard washer not available as a separate item 1
15 4130 713 1600 Thrust washer 1
16 4126 642 7600 Collar nut M10x1 l/h thread 1
17 9075 478 4159 Pan head self-tapping screw IS-D5x24 2
18 4126 713 3100 Rider plate option 1
19 4137 710 7108 Drive tube assembly Ø 25.4 mm / 1'' 1
20 4137 711 7300 Flexible liner 1455 mm / 57 5/16'' 1
21 4137 711 2101 Plug 2
22 4137 711 3200 Drive shaft → replaced by 4137 711 3202 TI 11/2005 1
23 4119 182 2110 Support 2
24 4140 007 1006 Hose clamp kit 1
25 9022 341 1270 Spline screw IS-M6x14 1
26 0000 711 2500 Sleeve 1
27 0000 967 3725 Warning pictogram FS 1
Not numbered on the diagram — assemblies, kits and options
— 4137 640 0100 Gearhead 1
— 4130 640 7301 Set of pinions 1
— 0781 120 1117 Gear lubricant 80 g Fitment / change note → not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · FS 25-4 / FS 65-4

FS 25-4 / FS 65-4: transport guards and service consumables

Accessory application ranges are not extra cutting-tool approvals; lubricant destinations stay distinct.

  • Page 6 section 4 lists transport guard 4116 790 3900 for all metal cutting tools;4119 790 3906 for cutting blades 230-4 and255-8 plus circular blade 225 scratcher/chisel;4119 790 3901 for circular blades 200 and225 scratcher/chisel. These are ACCESSORY application ranges, not approval of255-8 or225mm blades on these machines; section 3 remains the machine-tool limit.
  • Retained4170 transport-guard sheet lists3901 as Ø225 and3906 as Ø255, shorter/different descriptions than the TI ranges; preserve both, not a silent narrowing or expansion. Guard3900 is not listed there. No invented replacement chain, availability or drawing position.
  • STIHL gear lubricant 1109 (80g) /1110 (225g) is for DRIVE SHAFT IN DRIVE TUBE; heavy-duty gear lubricant 1117 (80g) /1118 (225g) is for GEARHEAD. Full order numbers are in the parts list below. Later4170 gearhead sheet calls1117 “Gear lubricant 80g”; its shorter wording does not merge the historical application distinction.
  • Special oil 0781 417 1315,100ml bottle: rewind spring and rope-rotor bearing bore, NOT the engine-oil specification. Page 7 section 4.2: saw set4020 893 5000 for200/225 CHISEL-TOOTH circular blades; sharpening template4020 890 5500 for brush knife. No sharpening angles or scratcher-tooth saw-setting permission is supplied.
  • Historical TI14/1998, series 4170: FS 25-4 and FS 65-4 only, with stated handle restrictions. Not FS 25/FS 65 two-strokes or later 4-MIX engines. No serial cutoff or current-stock promise is supplied. No hardware operation was performed.

Source: TI 14/1998, p. 6 · TI 14/1998, p. 7 — Page 6 entire section 4 accessory table; page 7 section 4.2 sharpening aids.

Part numbers (10)
  • 4116 790 3900 — Transport guardHistorical accessory/consumable · All metal cutting tools per TI
  • 4119 790 3906 — Transport guardHistorical accessory/consumable · 230-4,255-8 cutting blades;225 scratcher/chisel circular blades
  • 4119 790 3901 — Transport guardHistorical accessory/consumable · 200 and225 scratcher/chisel circular blades
  • 0781 120 1109 — Gear lubricant 80gHistorical accessory/consumable · Drive shaft in drive tube
  • 0781 120 1110 — Gear lubricant 225gHistorical accessory/consumable · Drive shaft in drive tube
  • 0781 120 1117 — Heavy-duty gear lubricant 80gHistorical accessory/consumable · Gearhead
  • 0781 120 1118 — Heavy-duty gear lubricant 225gHistorical accessory/consumable · Gearhead
  • 0781 417 1315 — Special oil 100mlHistorical accessory/consumable · Starter rewind spring and rope-rotor bearing bore
  • 4020 893 5000 — Saw setHistorical accessory/consumable · 200/225 circular blades CHISEL TOOTH
  • 4020 890 5500 — Sharpening templateHistorical accessory/consumable · Brush knife

Wrong number or missing part for the FS 25-4, FS 65-4? Report a correction →