Stihl 4221 · Section G · 7 of 20 · 24 parts
Rewind starter
Fits TS 460.
Historical fitment & changes (6) — includes parts and conditions not shown on this drawing.
Parts (24)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4221 701 0200 | Cast arm | 1 |
| 2 | 4221 660 0400 | Belt tensioner | 1 |
| 3 | 4221 664 2100 | Clamping lever | 1 |
| 4 | 4221 664 4200 | Cover | 1 |
| 5 | 9022 341 0975 NLA | Spline screw IS-M5x14 | 2 |
| 6 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 6 |
| 7 | 9490 000 7850 | Narrow V-belt 9.7x850 | 1 |
| 8 | 4221 701 0900 | Cover | 1 |
| 9 | 4221 190 0405 | Starter cover Fitment / change note → | 1 |
| 10 | 1110 084 9102 | Bushing | 1 |
| 12 | 4116 190 0600 | Rewind spring | 1 |
| 13 | 4224 190 1001 | Rope rotor | 1 |
| 14 | 0000 190 3414 | Starter grip ElastoStart Ø 4.5 mm | 1 |
| 15 | 0000 190 2901 | Starter rope Ø 4.5 mm → replaced by 0000 190 3500 TI 21/2009 | 1 |
| 16 | 4221 195 7200 | Pawl | 1 |
| 17 | 1118 162 8935 | Washer | 1 |
| 18 | 1117 195 3500 | Spring | 1 |
| 19 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 4 |
| 40 | 4221 084 5600 | Screw Fitment / change note → | 1 |
| 41 | 1107 195 8200 | Starter rope Ø 4.5x1000 mm Fitment / change note → | 1 |
| 42 | 1121 195 3400 | Starter grip Fitment / change note → | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4221 190 4000 | Rewind starter Fitment / change note → | 1 |
| — | 0000 930 2295 NLA | Starter rope Ø 4.5mm / 28 pieces not illustratedoption | 1 |
| — | 0000 930 2200 NLA | Starter rope Ø 4.5 mm x 30.5 m Fitment / change note → not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · TS 460
TS 460 starter: single plastic pawl transmits starting torque
Single-pawl engagement in the rope rotor; wear statement is limited to that mechanism.
- The single-pawl starter positively transmits starting torque to the starter wheel via a PLASTIC pawl inserted in the rope rotor. The page 4 paragraph identifies that pawl as the only wear part here and says it can be replaced easily.
- The phrase only wear part here describes the torque-engagement arrangement, NOT a guarantee that the whole starter, rope, rewind spring or machine cannot wear. It provides no pawl part number, replacement interval or rope dimension; those are not inferred from the drawing or another model.
- Historical TI 43/1995 description of TS 460, type 4221, not current supply, measured performance or a complete repair procedure. No hardware operation was performed. The sheet link identifies the exact model/component only; no later IPL revision is backdated to 1995.
Source: TI 43/1995, p. 4 — TS 460 starter: single plastic pawl transmits starting torque.
No additional parts-table entry added.
Service note · TS 460
TS 460 starter rope: printed metric and inch lengths conflict
4.5 mm diameter, 1000 mm length; source prints an inconsistent 3 5/16 inch length.
- The original page 7 scan gives starter-rope diameter 4.5 mm and length 1000 mm, followed by the printed parenthesis 3/16 in × 3 5/16 in. The indexed text agrees on that anomalous inch length; it is NOT silently corrected to a plausible feet/inches value.
- 1000 mm is approximately 39.37 inches, not 3 5/16 inches. This arithmetic identifies an internal source discrepancy, not an independently verified replacement length. Preserve the metric specification and conflicting printed inch value together; no rope part number or modern replacement approval is inferred.
- Historical TI 43/1995 description of TS 460, type 4221, not current supply, measured performance or a complete repair procedure. No hardware operation was performed. The sheet link identifies the exact model/component only; no later IPL revision is backdated to 1995.
Source: TI 43/1995, p. 7 — TS 460 starter rope: printed metric and inch lengths conflict.
No additional parts-table entry added.
Service note · TS 460
TS 460 ElastoStart: force smoothing and rope-limited extension
Quick-starting system combines ElastoStart with a decompression valve from X 32 675 830.
X 32 675 830 — Introduction from this printed machine number for TS 460 and this modification only; not a model-identification range or a cutoff for other changes.
- The cover contents name four changes; only the quick-starting system is introduced generally from X 32 675 830. ElastoStart comprises starter grip, rubber element and starter rope. The graph compares ElastoStart with a standard grip against tensile force and hand displacement; neither axis gives numerical units or calibrated values, so no force-reduction percentage is derived.
- A plastic plate is vulcanized onto both ends of the rubber element in the grip. The two injection-moulded rope nipples are separated by more than the relaxed element length but less than its extended length; intervening rope is compressed into the relaxed element bore.
- The page 2 drawing identifies handle (1), rubber element (2), lower nipple (3), rope (4), upper nipple (5). Initial force passes through handle, element and LOWER nipple into the rope; compression stretches the element. The source describes extension proportional to force and almost uniform handle force after first compression, not measured project results.
- Extension is LIMITED BY THE ROPE inside the element. At that limit force passes directly from the handle through the UPPER nipple into the rope. This is the source’s overextension-limiting design claim, not evidence an aged or damaged starter cannot fail.
- Historical TI evidence for TS 460, type 4221, not current supply, verified physical interchange or a complete repair procedure. No hardware operation was performed. Exact-model IPL links identify components only; no later IPL revision is backdated to 1995.
Source: TI 49/1995, p. 1 · TI 49/1995, p. 2 — TS 460 ElastoStart: force smoothing and rope-limited extension.
No additional parts-table entry added.
Historical fitment · TS 460
TS 460 starter cover keeps its number while ElastoStart contents change
4221 190 4000 retained; old plain rope and handle stay available for older machines.
X 32 675 830 — Introduction from this printed machine number for TS 460 and this modification only; not a model-identification range or a cutoff for other changes.
- Starter cover with starter mechanism 4221 190 4000 is UNCHANGED IN NUMBER; remark 2 says only the MODIFIED version is available from factory. The inclusion range is items 10–14, interpreted with each row’s former/new dashes rather than requiring both old and new handles together.
- Former starter rope 1107 195 8200, diameter 4.5 × 1000 mm, and handle 1121 195 3400 have dashes in the new column. ElastoStart handle 1122 190 3400 includes item 14, starter rope 1122 190 2900, diameter 4.5 mm. The latter’s fitted LENGTH is not stated; do not transfer the old 1000 mm length.
- Bulk starter rope 0000 930 2200 is described as diameter 4.5 mm × 30.5 m and has a new-column dash. The new row 0000 930 2268 is diameter 4.5 / 28 units: 28 is a supply count, not a fitted length of 28 mm or 28 m.
- Remark 3 keeps the old 1107 195 8200 rope, 1121 195 3400 handle and 0000 930 2200 bulk rope available for OLDER MACHINES AND OTHER SERIES. This is not global deletion or evidence of direct conversion with the old plain rope. Quick-starting introduction is X 32 675 830; rotor timing is separately future/stock-limited.
- Historical TI evidence for TS 460, type 4221, not current supply, verified physical interchange or a complete repair procedure. No hardware operation was performed. Exact-model IPL links identify components only; no later IPL revision is backdated to 1995.
Source: TI 49/1995, p. 3 — TS 460 starter cover keeps its number while ElastoStart contents change.
Part numbers (7)
- 4221 190 4000 — Starter cover with modified starter contentsretained-number · TS 460; historical configuration and supply limits in this note
- 1107 195 8200 — Plain starter rope 4.5 × 1000 mm; retained older-machine supplyoriginal · TS 460; historical configuration and supply limits in this note
- 1121 195 3400 — Plain handle; retained older-machine supplyoriginal · TS 460; historical configuration and supply limits in this note
- 1122 190 3400 — ElastoStart handle including ropenew · TS 460; historical configuration and supply limits in this note
- 1122 190 2900 — ElastoStart rope, diameter 4.5 mm; length unspecifiednew · TS 460; historical configuration and supply limits in this note
- 0000 930 2200 — Bulk rope 4.5 mm × 30.5 m; retained older-machine supplyoriginal · TS 460; historical configuration and supply limits in this note
- 0000 930 2268 — Rope diameter 4.5 / 28 unitsnew · TS 460; historical configuration and supply limits in this note
Conditional replacement · TS 460
TS 460 rope rotor gains pressed-in bushing: future introduction, stock-limited old part
4221 195 0400 → 4221 190 1000; no independent rotor serial cutoff.
- Section 1.2 says rope rotor 4221 195 0400 WILL BE replaced by 4221 190 1000 with a PRESSED-IN BUSHING in the FORESEEABLE FUTURE. The summary repeats this pair and remark 4 keeps the unchanged version available WHILE STOCKS LAST.
- The summary’s X 32 675 830 introduction line explicitly labels the STIHL QUICK-STARTING SYSTEM. It does not override the rotor’s separate future-tense prose. No independent rotor serial cutoff is established; this note deliberately has no structured changeover.
- No bushing service number, dimensional compatibility measurement or reverse-interchange approval is supplied. The stated functional improvement is a historical manufacturer claim.
- Historical TI evidence for TS 460, type 4221, not current supply, verified physical interchange or a complete repair procedure. No hardware operation was performed. Exact-model IPL links identify components only; no later IPL revision is backdated to 1995.
Source: TI 49/1995, p. 3 — TS 460 rope rotor gains pressed-in bushing: future introduction, stock-limited old part.
Part numbers (2)
- 4221 195 0400 — Rope rotor; while stocks lastoriginal · TS 460; historical configuration and supply limits in this note
- 4221 190 1000 — Rope rotor with pressed-in bushingnew · TS 460; historical configuration and supply limits in this note
Conditional replacement · TS 460
TS 460: steel starter post keeps the cover and mechanism numbers
Groove-headed screw is omitted in the new design but retained for older machines.
- Historical TI06/1998 for TS 460, type 4221 only. Later 2012 IPL sheets provide exact-model navigation/comparison, not proof that later carburetor variants share the 1998 settings. No extension to other cut-off machines or saws. Historical factory availability is not current stock or verified physical interchange. No hardware operation was performed.
- The original starter cover has an INTEGRALLY MOULDED PLASTIC SHAFT plus a GROOVE-HEADED SCREW for mounting the spring clip. The revised cover has a CAST-IN STEEL SHAFT; that groove-headed screw is OMITTED ENTIRELY from the new design.
- Starter mechanism 4221 190 4000 and starter cover 4221 190 0405 retain IDENTICAL original/new numbers. Their original versions remain available WHILE STOCKS LAST (remark1), unlike the carburetor-control modified-only rule. Number identity alone cannot distinguish plastic versus steel shaft.
- Groove-headed screw 4221 084 5600 has a dash in the new column but remains available for OLDER MACHINES (remark2). Do not fit it to the new steel-shaft design merely because it is still listed in the later exact-model IPL.
- The mechanism inclusion line lists rows2 and3, interpreted with the version columns: the new assembly includes the revised cover but not the omitted screw. OTHER PARTS AS BEFORE. Introduction is CONTINUOUS, with no serial cutoff, shaft dimensions, clip-conversion procedure or torque stated.
- The earlier TI49/1995 same-number starter change concerned ElastoStart contents and its own modified-only supply rule; this 1998 steel-post revision has a distinct while-stocks-last rule. Neither edition’s availability wording silently replaces the other historical revision.
- The contents page calls starter mechanism item3 whereas the actual body heading is section2. The last-TI footer TS460:46.96, copyright1998 and documentation6228 are bibliographic items, not a delegated installation procedure.
Source: TI 6/1998, p. 3 — Section2 starter mechanism, all summary rows and both remarks.
Referenced bulletin evidence: TI 49/1995, p. 3 — TS 460 starter cover keeps its number while ElastoStart contents change.
Part numbers (3)
- 4221 190 4000 — Starter mechanismSame number; revised steel-post design · TS 460; only the version and conditions stated here
- 4221 190 0405 — Starter coverSame number; plastic or steel shaft by revision · TS 460; only the version and conditions stated here
- 4221 084 5600 — Groove-headed screwOmitted in new design; retained for older machines · TS 460; only the version and conditions stated here
Wrong number or missing part for the TS 460? Report a correction →