← TS 700 · FW 20 · TS 800

Stihl 4224 · Section A · 1 of 15 · 23 parts

Crankcase

Fits TS 700.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415151516161617181922034566789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (23)

PosPart numberDescriptionQty
1 4224 020 2910 Crankcase Fitment / change note → 1
2 9503 003 0540 Grooved ball bearing 6204 1
3 9640 003 2257 Oil seal 20x42x5 1
4 4224 790 9902 Annular buffer 1
5 0000 791 3102 Spring 1
6 4224 792 2902 Bearing plug 2
7 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 1
8 4224 020 2605 Crankcase, fan side → replaced by 4224 430 0503 TI 43/2007 1
9 9503 003 0450 Grooved ball bearing 6203 1
10 9640 003 1745 Oil seal 17x28x7 1
11 1110 122 3900 Elbow connector 1
12 0000 988 8600 Sleeve 2
13 4224 790 9902 Annular buffer 1
14 4224 790 9903 Annular buffer 1
15 9074 478 4435 Pan head self-tapping screw IS-P6x19 3
16 1122 791 7300 Plug 3
17 4224 030 0400 Crankshaft 1
18 1120 036 8500 Woodruff key 2x3.7 1
19 4224 029 0500 Gasket 1
20 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 5
Not numbered on the diagram — assemblies, kits and options
— 4224 007 1012 Set of gaskets 1
— 4224 007 1010 Set of gaskets → replaced by 4224 007 1012 TI 43/2007 1
— 4224 007 1019 Set of gaskets 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · TS 700

TS 700: reshaped crankcase is an older-machine replacement

Column order must not turn a crankcase into a starter-cover replacement.

  • Section 1.7, under TS 700-only section 1: crankcase 4224 020 2903 is replaced by reshaped 4224 020 2910. Arrows in figure 376TI064 mark the changed shape. Previous crankcase is no longer available; new 2910 can also be used for older machines (summary row 6, remarks 1/2).
  • The extracted supersession 4224 020 2903 → 4224 190 0410 is FALSE: it joins the left crankcase column to the right starter-cover column. The correct crankcase pair is 2903 → 2910. This editorial correction does not alter the retained source body or canonical IPL rows.
  • The broad cover names TS 700/TS 800, but this section is TS 700 ONLY; no TS 800 crankcase interchange is inferred.
  • Historical English TI06/2010, series 4224. Modification introduced continuously; no numeric serial cutoff is supplied. Availability statements describe 2010, not current stock. No physical interchange test was performed.

Source: TI 6/2010, p. 4 · TI 6/2010, p. 11 · TI 6/2010, p. 12 — reshaped crankcase is an older-machine replacement.

Part numbers (2)
  • 4224 020 2903 — Previous crankcaseDiscontinued · TS 700; retain the specified guard and fastening generation
  • 4224 020 2910 — Reshaped crankcaseNew; older-machine replacement · TS 700; retain the specified guard and fastening generation

Wrong number or missing part for the TS 700? Report a correction →