← TS 700 · FW 20 · TS 800

Stihl 4224 · Section B · 2 of 15 · 37 parts

Cylinder, Muffler

Fits TS 700.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121314151617181919191922020212324252627282933031323245678899
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (37)

PosPart numberDescriptionQty
1 4224 020 1205 Cylinder with piston Ø 56 mm 1
2 4224 020 1202 Cylinder with piston Ø 56 mm → replaced by 4224 020 1205 TI 43/2007 1
3 not sold separately Diaphragm not available as a separate item 1
4 not sold separately Support plate not available as a separate item 1
5 not sold separately Screw not available as a separate item 1
6 4224 030 2005 Piston Ø 56 mm 1
7 4224 034 1500 Piston pin 12x8x35 1
8 1115 034 3013 Piston ring Ø 56x1.5 mm 2
9 9463 650 1200 Snap ring 12x1 1
10 9512 003 3283 Needle cage 12x17x13 1
11 4223 020 9400 Decompression valve 1
12 4224 029 2302 Cylinder gasket 1
13 4224 029 2300 Cylinder gasket → replaced by 4224 029 2302 TI 43/2007 1
14 9022 341 1380 Spline screw IS-M6x35 4
15 0000 400 7000 Spark plug NGK BPMR7A 1
15 1110 400 7005 Spark plug Bosch WSR 6 F 1
16 9771 021 2620 Hose clip Ø 36x5 1
17 4223 141 2200 Manifold 1
18 1122 141 1805 Sleeve 1
19 9771 021 2524 Hose clip 27x5 4
20 4224 141 2202 Manifold 2
21 4224 141 5400 Hose 1
23 4224 140 0606 Muffler Fitment / change note → 1
24 4224 141 9001 Screen Fitment / change note → 1
25 9039 448 0656 Self-tapping screw M4x9.6 Fitment / change note → 1
26 4224 141 9000 Screen Fitment / change note → → replaced by 4224 141 9001 TI 39/2009 1
27 4224 141 6601 Clip Fitment / change note → 1
28 4224 149 0600 Muffler gasket 1
29 4224 080 0900 Air guide shroud 1
30 9416 868 6531 Hollow rivet 6.5x0.5x6.8 1
31 9991 003 5087 Sleeve 7.5x6.8 1
32 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 5
Not numbered on the diagram — assemblies, kits and options
— 4224 020 1601 Diaphragm 4
— 4224 020 1600 Diaphragm → replaced by 4224 020 1601 TI 43/2007 4
— 4224 007 1012 Set of gaskets 1
— 4224 007 1010 Set of gaskets → replaced by 4224 007 1012 TI 43/2007 1
— 4224 007 1019 Set of gaskets 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · TS 700 / TS 800

TS 700 / TS 800: new complete muffler fits older machines

Changed outlet shape accompanies a different screen attachment.

  • Muffler 4224 140 0602 is replaced by 4224 140 0606. Figure 376TI044 shows previous muffler LEFT (1) and new muffler RIGHT (2); arrows identify the changed shape at the exhaust opening. No dimensions are provided for reworking the old housing.
  • Previous muffler is no longer available; new muffler can also be used on older TS 700 / TS 800 machines. Summary row 6 includes old screen/clip items 8/9; row 7 includes new screen/screw items 8/10, with other parts as previously per the spare-parts list. Complete-muffler retrofit is not evidence that the new screen and screw fit the old housing.
  • Continuous introduction has no numeric serial cutoff. Preserve the associated screen and attachment revision when choosing the replacement; no fastening torque or cutting-machine operating procedure is supplied.
  • Historical English 2009 source for TS 700 and TS 800, series 4224. Supply statements describe that source date, not current stock. No physical interchange test was performed.

Source: TI 39/2009, p. 3 · TI 39/2009, p. 4 — new complete muffler fits older machines.

Part numbers (2)
  • 4224 140 0602 — Muffler with old screen and clipPrevious; discontinued · TS 700 / TS 800; exact carburetor or muffler version required
  • 4224 140 0606 — Muffler with new screen and screwNew; older-machine retrofit · TS 700 / TS 800; exact carburetor or muffler version required

Service note · TS 700 / TS 800

TS 700 / TS 800: old clip-mounted screen remains supported

New screen uses an M4x9.6 thread-forming screw on the revised muffler.

  • Figure 376TI044: old screen (3) 4224 141 9000 and clip (4) 4224 141 6601 are replaced in the revised muffler by new screen (5) 4224 141 9001 and thread-forming screw M4x9.6 (6) 9039 448 0656. The old round screen/clip and new rectangular screen/screw are shown separately; these are not equivalent attachment methods.
  • Previous screen 4224 141 9000 AND clip 4224 141 6601 remain available for older machines retaining previous muffler 4224 140 0602. Summary rows 8/9 confirm this old-version supply. Do not replace this conditional support with a universal obsolete-part label.
  • The new screen and screw belong to new muffler 4224 140 0606. The source does not authorize fitting that screen/screw to the old muffler, modifying the old outlet, omitting the screen, or substituting an arbitrary M4 screw. The printed 9.6 mm screw length is retained; no torque is given.
  • Historical English 2009 source for TS 700 and TS 800, series 4224. Supply statements describe that source date, not current stock. No physical interchange test was performed.

Source: TI 39/2009, p. 3 · TI 39/2009, p. 4 — old clip-mounted screen remains supported.

Part numbers (4)
  • 4224 141 9000 — Previous spark-arresting screenRetained for old muffler · TS 700 / TS 800; exact carburetor or muffler version required
  • 4224 141 6601 — Screen clipRetained for old muffler · TS 700 / TS 800; exact carburetor or muffler version required
  • 4224 141 9001 — New spark-arresting screenNew muffler · TS 700 / TS 800; exact carburetor or muffler version required
  • 9039 448 0656 — Thread-forming screw M4x9.6New screen attachment · TS 700 / TS 800; exact carburetor or muffler version required

Wrong number or missing part for the TS 700? Report a correction →