Stihl 4238 · Section F · 6 of 13 · 18 parts
Ignition system
Fits TS 410, TS 420.
Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.
Parts (18)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4238 400 1202 | Flywheel | 1 |
| 2 | 4238 400 1201 NLA | Flywheel | 1 |
| 3 | 4238 400 4000 NLA | Generator | 1 |
| 4 | 9022 313 0658 | Spline screw IS-M4x12 | 3 |
| 5 | 0000 955 0802 | Collar nut M8x1 | 1 |
| 6 | 4238 400 1301 | Ignition module | 1 |
| 7 | not sold separately | Ignition lead 275 mm not available as a separate item | 1 |
| 8 | 0000 989 1002 | Grommet | 1 |
| 9 | 4238 431 2100 | Connector tag | 1 |
| 10 | 9022 341 1019 | Spline screw IS-M5x20 | 2 |
| 11 | 4223 084 1600 | Cover | 1 |
| 12 | 1128 405 1000 | Spark plug boot | 1 |
| 13 | 0000 998 0604 | Torsion spring | 1 |
| 14 | 4238 080 3100 | Fan cover Fitment / change note → | 1 |
| 15 | 0000 963 0809 | Bushing Fitment / change note → | 3 |
| 16 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 4 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 405 0600 NLA | Ignition lead 1 m not illustratedoption | 1 |
| — | 0000 930 2251 | Ignition lead 10 m not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · TS 410 / TS 420
TS 410 / TS 420: suppressed spark plug and electrode gap
The specified gap is a plug-electrode gap, not the ignition-module air gap.
- Section 2.3 specifies an ignition module with integrated ELECTRONIC SPEED LIMITATION and suppressed BOSCH WSR6F spark plug. Electrode gap: 0.020 in (0.5 mm).
- The 0.5 mm value is the SPARK-PLUG electrode gap, NOT flywheel/module clearance. The TI does not supply a module air gap, spark-plug tightening torque, alternate plug approval or a procedure for defeating speed limitation.
- Retained English-USA 2007 source guidance, not present-day stock availability or proof for later variants. No numeric serial cutoff is supplied. No physical interchange test was performed.
Source: TI 37/2007, p. 11 — suppressed spark plug and electrode gap.
No additional parts-table entry added.
Service note · TS 410 / TS 420
TS 410 / TS 420: repair allowances: included leak, fuel and circuit tests
The included tests and failure-cause repair are part of the printed allowances.
- The same trained-personnel, properly-equipped-shop scope and MINUTES apply. Rows 11–15: (11) replace crankcase/gasket or reseal crankcase, INCLUDING air-leak test = 160; (12) crankshaft main bearing(s), INCLUDING air-leak test = 170; (13) crankshaft seal(s), INCLUDING air-leak test = 70; (14) engine air-leak test alone = 30; (15) cylinder and/or piston, INCLUDING air-leak test AND repair of components causing failure = 90.
- Rows 16–20: (16) ignition module or flywheel replacement, INCLUDING stop-circuit test = 25; (17) fuel-tank line, vent line or pickup-body replacement = 40; (18) intake/transfer-port manifold or intake-flange replacement = 35; (19) carburetor repair/replacement, INCLUDING fuel-system testing = 45; (20) rewind-starter repair/replacement = 15.
- An included test must not be silently dropped or automatically charged twice by summing a standalone test row. These allowances do not supply leakage pressures, test durations, electrical limits, tightening torques or a full diagnostic sequence.
- Retained English-USA 2007 source guidance, not present-day stock availability or proof for later variants. No numeric serial cutoff is supplied. No physical interchange test was performed.
Source: TI 37/2007, p. 16 — repair allowances: included leak, fuel and circuit tests.
No additional parts-table entry added.
Service note · TS 410 / TS 420
TS 410 / TS 420: repair allowances: remaining jobs and no-labor rows
Handling allowance, miscellaneous repairs and no labor have different meanings.
- For trained/qualified personnel in properly equipped shops, in MINUTES: (21) repair/replace clutch, shoes or springs = 20; (22) replace rear handle frame or handle housing = 45; (23) replace muffler = 25; (24) replace air filter or filter housing = 15; (25) repair/replace stop switch INCLUDING circuit testing = 35.
- Row 40 miscellaneous/unlisted repairs = 15. Row 45 HANDLING ALLOWANCE ONLY — NO LABOR = 10. Row 50 NO LABOR = 0. The 10-minute handling allowance is not a repair labor estimate, and the explicit zero in row 50 is not the dash in engine-replacement row 1.
- The table has rows 1–25, 40, 45 and 50: 28 listed activities, NOT 50 rows or 50 completed repairs. The numbering gaps do not imply lost pages. Footer identifies 2007 Technical Documentation D1/MTK-fr; no prices or warranty approval are supplied.
- Retained English-USA 2007 source guidance, not present-day stock availability or proof for later variants. No numeric serial cutoff is supplied. No physical interchange test was performed.
Source: TI 37/2007, p. 16 — repair allowances: remaining jobs and no-labor rows.
No additional parts-table entry added.
Service note · TS 410 / TS 420
TS 410 / TS 420: fan cover keeps its number with three integrated bushings
Previous separate bushings remain available for previous fan covers.
- Fan cover 4238 080 3100 retains its number while THREE separate bushings 0000 963 0809 are replaced by permanently integrated knurled bushings. Figure 370TI050 shows old cover/bushing LEFT and revised cover RIGHT, including enlarged bushing details.
- New knurled bushings are NOT available as separate spare parts. Previous bushings 0000 963 0809 remain available for previous fan covers. Summary row 18 marks previous cover version discontinued and new version usable on older machines; unchanged number does not identify its physical revision.
- No C-index criterion or numeric serial cutoff is supplied in this fan-cover section. The filter-cover C-index and section 2 tank-joint serial 170 073 909 are NOT silently assigned to the fan cover. The retained ignition-system sheet contains this fan-cover part; it is not the bare starter cover revised in TI21/2009.
- Historical English 2009 source for TS 410 and TS 420, series 4238; supply statements are not present-day stock claims. No physical interchange test was performed.
Source: TI 22/2009, p. 6 · TI 22/2009, p. 7 — fan cover keeps its number with three integrated bushings.
Part numbers (2)
- 4238 080 3100 — Fan coverSame number; integrated-bushing revision · TS 410 / TS 420; source revision and pairing restrictions apply
- 0000 963 0809 — Separate bushingThree previously; retained for old covers · TS 410 / TS 420; source revision and pairing restrictions apply
Wrong number or missing part for the TS 410, TS 420? Report a correction →