← 024 · 026 · MS 260 · MS 240

Stihl 1121 · Section J · 9 of 17 · 33 parts

Tank housing

Fits 026.

Parts diagrams →

Historical fitment & changes (14) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161719192202021222324252627282933031323334456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (33)

PosPart numberDescriptionQty
1 1121 350 0829 Tank housing Fitment / change note → 1
2 1121 122 6600 Collar screw Fitment / change note → 2
3 0000 967 3662 Warning pictogram MS 1
4 1121 791 2800 Stop buffer Fitment / change note → 1
5 1125 442 1601 Contact spring 1
6 1121 123 7501 Grommet 1
7 1121 123 7502 Grommet 1
8 1121 123 7504 Grommet 1
9 0000 350 0525 Filler cap Fitment / change note → 1
10 9645 948 7734 O-ring 25x3.5 Fitment / change note → 1
11 0000 350 0520 Filler cap Fitment / change note → → replaced by 1127 350 0500 TI 48/1995 1
12 0000 350 0521 Filler cap 1
13 0000 359 1220 Sealing ring 1
14 0000 350 0900 Rope 1
15 0000 353 0600 Hook 1
16 0000 350 5800 Tank vent Fitment / change note → → replaced by 0000 350 5804 TI 41/2003 1
17 not sold separately O-ring not available as a separate item 1
19 1120 358 8105 Vent insert Fitment / change note → 1
20 9099 021 2770 Self-tapping screw 3.9x13 Fitment / change note → 1
21 1122 358 1800 Filter Fitment / change note → 1
22 1110 353 1600 Valve Fitment / change note → 1
23 1121 358 1800 Filter Fitment / change note → → replaced by 1122 358 1800 TI 31/2000 1
24 1121 358 2500 Cap Fitment / change note → 1
25 1121 350 5800 Tank vent Fitment / change note → 1
26 1121 358 7700 Hose Fitment / change note → 1
27 1121 358 7705 Hose Fitment / change note → 1
28 4114 353 1600 Valve Fitment / change note → → replaced by 1128 353 1600 TI 25/1996 1
29 1121 791 7500 Cover Fitment / change note → 1
30 0000 350 3504 Pickup body Fitment / change note → 1
31 1121 791 0600 Handle molding 1
32 9074 478 3076 Pan head self-tapping screw IS-P4x19 1
33 0000 967 3500 NLA Instruction label 1
34 0000 967 3405 Instruction label no longer available from factory 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · 024 / 026

024 / 026: tank housing and longer collar screws

The modified tank housing and same-number longer carburetor screws have different identification evidence.

X 32 611 639 — Modified tank housing from this machine number; not a separate heating-system or longer-screw cutoff.

  • Tank housing 1121 350 0801 changes to 1121 350 0804 from X 32 611 639 with the compensator air-filter system. Recesses and additional ribs give carburetor clearance and improved wire routing. TI31/1995 is retained but separately queued; its other air-filter and decompression changes are not imported by this note.
  • The housing includes two collar screws 1121 122 6600. Both old and new table columns print that same number; the new screws are 2 mm (0.08 inch) longer for electric carburetor heating. Part number alone does not distinguish screw length. Page 2 labels the illustrated dimension a = 45 mm (1 25/32 inch); do not reinterpret it as overall screw length or invent a new part number.
  • The tank changeover is not a separately stated introduction serial for the longer screws or the 026 VH heating system. Other parts remain as before in the section1 summary.
  • Original housings are supplied only while stocks last; only the new screw version is supplied. Page5 marks new tank housing as a universal replacement for all versions in this bulletin context. Historical supply is not current stock.

Source: TI 12/1996, p. 1 · TI 12/1996, p. 2 · TI 12/1996, p. 5 — Section 1 summary and remarks; section 2.1 dimension drawing; section 2.5 item1.

Part numbers (3)
  • 1121 350 0801 — Tank housingOriginal · 024 / 026
  • 1121 350 0804 — Tank housing including two collar screwsReplacement · 024 / 026
  • 1121 122 6600 — Collar screw; two per housingSame number, changed length · New electric-carburetor-heating clearance

Historical fitment · 026

026 VH: carburetor-box wiring and heater orientation

The original routing drawings distinguish ground, short circuit and heater connections and show TOP 1121 orientation.

  • Properly seat the harness grommet in the cutout at the top of the carburetor box; all three harness wires pass through it. Loop the generator/heater connection wire behind the ribs as drawing133TI023 KN; the insulating tube must completely cover the connectors.
  • Push the yellow-green ground-wire connector sleeve into the contact-spring loop. Push the short-circuit-wire connector sleeve into the switch-shaft seat. Route both wires behind the illustrated ribs (133TI024 KN). These are distinct destinations, not an interchangeable pair.
  • Push carburetor over the collar screws to the manifold flange without pinching wires. Move Master Control lever fully down to cold start. Fit the thermostatic-switch flag connector to the contact-spring tag; this tag is distinct from the loop receiving the ground wire.
  • Slip the heating element over the collar screws onto the carburetor, then fit the heating plate with TOP 1121 oriented as drawing133TI025 KN. The printed ordering number is 1125 121 9900; TOP 1121 is a marking, not a substitute ordering number.
  • These are the printed routing and assembly steps for 026 VH, not electrical diagnostic results, a universal retrofit or an instruction to energize hardware. The original drawing supplies orientation; no unprinted torque or wiring pinout is inferred.

Source: TI 12/1996, p. 4 · TI 12/1996, p. 5 — Section2.4.2 complete sequence and drawings133TI023/024/025 KN.

Part numbers (5)
  • 1121 440 3000 — Wiring harnessRouting subject · 026 VH
  • 1125 442 1600 — Contact springSeparate loop and connector tag · Ground and thermostat destinations
  • 1125 182 0901 — Switch shaftShort-circuit connector seat · 026 VH installation
  • 1128 434 5101 — Heating elementBefore heating plate · 026 VH
  • 1125 121 9900 — Heating plate marked TOP 1121Orientation-sensitive companion · 026 VH

Historical fitment · 024 / 026

024 / 026: changed tank stub and restricted vent

Tank housing 1121 350 0821 keeps its number while the vent stub changes from 17 mm to 15 mm diameter. Old vent parts remain historical spares.

2 46 606 073 — Section2 tank-vent/housing and pickup-body summary introduction; not the section1 clutch change or a universal model-identification range.

  • From serial 2 46 606 073, the improved tank vent requires changed diameter AND height of the tank-housing stub. The drawing labels previous A = 17 mm diameter and new B = 15 mm diameter. No numerical height is printed; do not infer a height or machining instruction from the image.
  • Tank housing 1121 350 0821 retains its number and includes items1–5. Only the modified version was supplied by the factory, with new vent and sintered filter. The same housing number is not proof of the old/new stub geometry.
  • Sintered filter changes from 1121 358 1800 to 1122 358 1800. Old cap 1121 358 2500 has no new cap counterpart in its table row; new vent assembly 1121 350 5802 includes self-tapping screw B3.9x13, 9099 021 2770, and grub-screw vent insert 1120 358 8105 (items4,5).
  • The self-tapping screw and grub screw restrict the cross-section of the two air inlet holes in the new vent. They are deliberate vent components, not shipping plugs. No installation depth, screw torque, airflow target or pressure test is printed.
  • The old sintered filter and cap remained available for older machines and other models. This does not establish that old/new vent parts interchange on unchanged housings, name any other model, or prove current parts supply. The later catalog sheet is navigation, not an override of the17/15mm distinction.

Source: TI 31/2000, p. 2 — Complete2 tank-vent portion: both stub diagrams, vent function, housing inclusion keys, items1–5 and remarks1–2.

Part numbers (7)
  • 1121 350 0821 — Tank housing including items1–5Same number; modified stub · 024 / 026; English USA TI31/2000 configuration only
  • 1121 358 1800 — Sintered filterPrevious; historical spare · 024 / 026; English USA TI31/2000 configuration only
  • 1122 358 1800 — Sintered filterNew version · 024 / 026; English USA TI31/2000 configuration only
  • 1121 358 2500 — CapPrevious; historical spare · 024 / 026; English USA TI31/2000 configuration only
  • 1121 350 5802 — Tank vent including screwsNew assembly · 024 / 026; English USA TI31/2000 configuration only
  • 9099 021 2770 — Self-tapping screw B3.9x13Air-inlet restriction component · 024 / 026; English USA TI31/2000 configuration only
  • 1120 358 8105 — Vent insert (grub screw)Air-inlet restriction component · 024 / 026; English USA TI31/2000 configuration only

Historical fitment · 024 / 026

024 / 026: 22 mm fuel pickup with molded weight

Pickup 0000 350 3504 replaces the 18 mm body with a 22 mm body and integrally molded weight.

2 46 606 073 — Section2 tank-vent/housing and pickup-body summary introduction; not the section1 clutch change or a universal model-identification range.

  • Previous fuel pickup 0000 350 3500 is18mm diameter; new pickup 0000 350 3504 is22mm diameter and has an integrally molded weight. The source says this further improves operation; no performance value, fuel-filter rating or measured result is supplied.
  • The section2 summary prints introduction from serial2 46 606 073 for this tank-system modification. The pickup is item6, outside the tank-housing inclusion range1–5: do not claim it is included with that housing or that the complete housing must be changed merely to replace the pickup.
  • The previous pickup remained available for other models (remark3), unlike the old vent parts explicitly retained for older machines and other models (remark2). Do not widen the old pickup remark into documented older024/026 spare approval or infer arbitrary hose/diameter interchange.
  • Last TI12/1999 is bibliography, not a missing instruction needed to interpret the printed pickup change. All availability is historical; present stock and physical interchange remain unverified.

Source: TI 31/2000, p. 2 — Complete2 pickup-body paragraph, item6, shared summary introduction and remark3.

Part numbers (2)
  • 0000 350 3500 — Fuel pickup body,18mm diameterPrevious; other-model supply retained · 024 / 026; English USA TI31/2000 configuration only
  • 0000 350 3504 — Fuel pickup body,22mm diameter with molded weightNew version · 024 / 026; English USA TI31/2000 configuration only

Conditional replacement · 026 / MS 260

026 / MS 260: clip caps and replacement fuel-tank housing

Same cap design does not mean the same fuel/oil cap or sealing ring.

  • Both tanks use the tool-free hinged-clip design, but fuel cap 0000 350 0525 and oil cap 0000 350 0526 have different numbers and seals. Modified filler openings are required; the TI does not authorize a cap-only conversion of an old filler neck.
  • To open the depicted cap, raise the clip and turn about a quarter-turn counterclockwise. To close, align the marks with the clip raised, turn about a quarter-turn clockwise to the stop, then fold the clip down. Proper closure requires the clip lug to engage its recess. These instructions describe the historical cap shown in the TI.
  • Tank housing 1121 350 0829 replaces 1121 350 0828 with a modified neck and new vent. The old housing includes the old vent (summary item16); the new housing includes items14–17: fuel cap, 25 x 3.5 sealing ring, new vent and its 10 x 2 ring. The clip cap was to be supplied with the new housing for about three years, enabling repairs to 026 saws; that historical packaging period is not a current kit-content guarantee. Old housing supply is limited to existing factory stocks.
  • Fuel cap 0000 350 0520 changes to 0000 350 0525 with ring 9645 948 7734 (25 x 3.5). Oil cap 0000 350 0510 changes to 0000 350 0526 with ring 9645 948 2470 (23 x 3). Both old caps remain available for older machines.
  • Shared IPL sheets do not extend these changes to unnamed variants. Introduction is in progress; the TI gives no numerical serial cutoff. Availability is the historical 2001 factory statement, not current stock. Later catalog numbers do not replace the historical evidence or prove unrestricted interchangeability.

Source: TI 43/2001, p. 2 · TI 43/2001, p. 3 · TI 43/2001, p. 7 · TI 43/2001, p. 8 — Sections3–4, all cap-operation diagrams and summary rows12–15,24–25/remarks1–2.

Part numbers (8)
  • 1121 350 0828 — Fuel-tank housingPrevious; stocks only · Only the named model/configuration; see conditions
  • 1121 350 0829 — Fuel-tank housing with items14–17New · Only the named model/configuration; see conditions
  • 0000 350 0520 — Fuel capPrevious; retained · Only the named model/configuration; see conditions
  • 0000 350 0525 — Fuel clip capNew; fuel only · Only the named model/configuration; see conditions
  • 9645 948 7734 — Sealing ring 25 x 3.5New fuel-cap seal · Only the named model/configuration; see conditions
  • 0000 350 0510 — Oil capPrevious; retained · Only the named model/configuration; see conditions
  • 0000 350 0526 — Oil clip capNew; oil only · Only the named model/configuration; see conditions
  • 9645 948 2470 — Sealing ring 23 x 3New oil-cap seal · Only the named model/configuration; see conditions

Conditional replacement · 026 / MS 260

026 / MS 260: diaphragm tank vent and sealing ring

Replacement vent admits air under tank vacuum; no pressure threshold is specified.

  • Vent 0000 350 5800 replaces 1121 350 5802 in the revised housing; it includes sealing ring 9645 948 7512 (10 x 2). The previous vent remains available for older machines.
  • Construction drawing: perforated sheet/diaphragm (1), air-side filter (2), tank-side filter (3), integral protective cap (4). The function drawings use a different key: air side (1), tank side (2), diaphragm (3), valve plate (4). Do not transfer callout numbers between drawings.
  • Equal air/tank pressures let the spring hold the diaphragm against the valve plate, closing the valve. Fuel withdrawal creates tank vacuum, lifting the diaphragm and admitting air; equalized pressure closes it again. No numerical test pressure, adjustment or reverse-pressure behavior is specified.
  • Shared IPL sheets do not extend these changes to unnamed variants. Introduction is in progress; the TI gives no numerical serial cutoff. Availability is the historical 2001 factory statement, not current stock. Later catalog numbers do not replace the historical evidence or prove unrestricted interchangeability.

Source: TI 43/2001, p. 3 · TI 43/2001, p. 4 · TI 43/2001, p. 7 · TI 43/2001, p. 8 — Section4.1 exploded/cross-section diagrams and summary rows16–17/remark1.

Part numbers (3)
  • 1121 350 5802 — Tank ventPrevious; retained · Only the named model/configuration; see conditions
  • 0000 350 5800 — Diaphragm tank ventNew; includes ring · Only the named model/configuration; see conditions
  • 9645 948 7512 — Sealing ring 10 x 2Vent ring · Only the named model/configuration; see conditions

Conditional replacement · 024 / 026

024 / 026: three-piece tank vent and housing restriction

Valve, sintered filter and cap replace the old vent from X 30 976 775, but fit ONLY the modified tank housing.

X 30 976 775 — Introduction of the modified tank vent and housing on explicitly named 024 and 026; not a universal model-identification range or later-variant cutoff.

  • From machine number X 30 976 775, the original vent with insert and self-tapping screw is replaced by valve (1) 4114 353 1600, sintered filter (2) 1121 358 1800 and cap (3) 1121 358 2500. The new parts can ONLY be installed in the modified tank housing, not individually retrofitted into the original housing.
  • The stated pressure equalization between fuel tank and atmosphere occurs at approximately 0.3 bar (4.5 psi) pressure differential. This is a description of valve operation, NOT a leak-test pressure, acceptance tolerance or complete diagnostic procedure. No pressure-direction-specific threshold is supplied.
  • The sintered filter helps prevent dirt entering the valve/tank; the cap protects it against damage and contamination. Both drawings retain keys 1 valve, 2 filter, 3 cap; the section shows the filter above the valve under the cap. The arrow identifies the cap air inlet/outlet in a low-dust zone of the carburetor box. No inferred machining dimensions or seal-installation method.
  • Original vent 1121 350 5800 includes insert 1120 358 8105 and self-tapping screw B3.9x13 9099 021 2770. All THREE original items remain available for older machines under remark 1; dashes in the new-version column do not mean universal unavailability. New valve MOQ 1, filter MOQ 10 and cap MOQ 10 are ordering quantities, NOT ten installed filters or caps.
  • The later 024/026 IPL also contains other vent/filter/valve versions. Its part-number-attached TI 25/1996 sentence names tank housing 1128 350 0806 and X 33 986 053; this does NOT establish that cutoff or valve interchange for 024/026. Canonical later rows and extracted annotations are retained without promoting them to a model-specific assertion here.
  • The retained metadata title mentions muffler, but neither of the two original pages contains a muffler section. No muffler change is inferred; the body/scans remain authoritative for this note.
  • Historical TI guidance for the explicitly named models only; exact-model IPL links are navigation, not proof of unrestricted interchange. No hardware operation was performed.

Source: TI 6/1995, p. 1 · TI 6/1995, p. 2 — Complete bulletin: all text, drawings, table, remarks and footer.

Part numbers (6)
  • 1121 350 5800 — Original tank ventolder-machine supply retained · 024; 026; stated TI conditions
  • 1120 358 8105 — Original vent insertincluded in original vent; remains available · 024; 026; stated TI conditions
  • 9099 021 2770 — Self-tapping screw B3.9x13included in original vent; remains available · 024; 026; stated TI conditions
  • 4114 353 1600 — Valve, drawing key 1new modified-housing vent · 024; 026; stated TI conditions
  • 1121 358 1800 — Sintered filter, drawing key 2new modified-housing vent · 024; 026; stated TI conditions
  • 1121 358 2500 — Cap, drawing key 3new modified-housing vent · 024; 026; stated TI conditions

Conditional replacement · 024 / 026

024 / 026: unchanged housing numbers, changed supplied vent

Standard 0801 and carburetor-heating 0814 housings retain their numbers; only modified housings with all three vent pieces are supplied.

X 30 976 775 — Introduction of the modified tank vent and housing on explicitly named 024 and 026; not a universal model-identification range or later-variant cutoff.

  • Standard tank housing 1121 350 0801 and carburetor-heating version 1121 350 0814 have the SAME number in the original and new columns. The housing shape changed to accept the new vent from X 30 976 775; a matching part number alone does not identify the physical housing revision.
  • Only the modified housing version is available from the factory (remark 2). Each of the two housing versions includes drawing items 1–3: valve 4114 353 1600, filter 1121 358 1800 and cap 1121 358 2500. Modified housings are supplied together with these vent parts to facilitate replacement; this is not permission to install the new vent in an original housing.
  • All other parts as before. The table distinguishes the standard and carburetor-heating configurations; it does not equate them, extend to all series 1121 variants, or authorize an MS240/MS260 retrofit.
  • Later exact-model 024/026 IPL tank sheets list housing 1121 350 0829, not either TI housing number. This edition difference remains visible; the TI alone does not prove an 0801/0814-to-0829 supersession or equivalence.
  • Both the prose and summary print the same introduction number. Footer: Waiblingen, February 1, 1995; ©1995 Andreas Stihl, D1/MTK-sc, Technical Documentation. The issue label 06.95 and footer date are bibliography, not a June production date.
  • Historical TI guidance for the explicitly named models only; exact-model IPL links are navigation, not proof of unrestricted interchange. No hardware operation was performed.

Source: TI 6/1995, p. 1 · TI 6/1995, p. 2 — Complete bulletin: all text, drawings, table, remarks and footer.

Part numbers (5)
  • 1121 350 0801 — Standard tank housingsame number; modified supply only · 024; 026; stated TI conditions
  • 1121 350 0814 — Tank housing for carburetor heatingsame number; modified supply only · 024; 026; stated TI conditions
  • 4114 353 1600 — Valve, item 1included with each modified housing · 024; 026; stated TI conditions
  • 1121 358 1800 — Filter, item 2included with each modified housing · 024; 026; stated TI conditions
  • 1121 358 2500 — Cap, item 3included with each modified housing · 024; 026; stated TI conditions

Service note · 024 / 026

024/026 standard tank housing: 0804 to 0821

Production cutoff, standard-housing scope and spare-supply distinctions.

X 36 348 620 — Printed production introduction for TI18/1997 tank-housing and carburetor changes only; not the undated spark-plug boot seal deletion.

  • Section 1 says modified tank housings with different part numbers enter ALL SAW VERSIONS from X 36 348 620. The actual numbered summary row is expressly Tank housing (STANDARD): 1121 350 0804 to 1121 350 0821. The broad introduction wording does not make this standard-housing number correct for every heated or special version; no other housing number is printed.
  • Table item 1 says includes items 2 to 8. Read that range WITH the old/new columns: the new column lists mushroom valve 1110 353 1600, S-shaped hose 1129 358 7700 and stop buffer 1121 791 2800; shutter, straight hose, cover and plug show dashes in the new column. The range is not a claim that deleted old components are all packed into the new housing. All other parts as before.
  • Remark 1: original standard housing supplied by the factory ONLY WHILE EXISTING STOCKS LAST. Remark 2 retains shutter 1121 791 1300, straight hose 1121 358 7705, cover 1121 791 7500 and plug 1121 791 1400 for older machines. Remark 3 separately retains original valve 4114 353 1600 for older machines AND OTHER MODELS. No replacement plug number or new purpose for that plug is specified.
  • The new replacement housing includes the stop buffer. Page 2 limits new-hose inclusion to ABOUT THE NEXT TWO YEARS from this historical notice, not permanent kit contents or an exact end date. Larger hose opening and conditional reopening of the molded intake cut-out must be considered separately; the housing is not an unconditional drop-in for every older configuration.
  • Historical TI18/1997 evidence for 024 and 026 only, not MS240/MS260 or other successors. Model-sheet links aid discovery, not universal variant fitment. Factory supply statements describe the bulletin date, not current stock. No reciprocal interchange or physical verification inferred. No hardware operation was performed.

Source: TI 18/1997, p. 1 · TI 18/1997, p. 2 · TI 18/1997, p. 3 — 024/026 standard tank housing: 0804 to 0821.

Part numbers (3)
  • 1121 350 0804 — Original standard tank housing, item 1Factory existing stocks only · 024/026; 024/026 standard tank housing: 0804 to 0821; configuration restrictions in note
  • 1121 350 0821 — New standard tank housing, item 1Replacement standard version · 024/026; 024/026 standard tank housing: 0804 to 0821; configuration restrictions in note
  • 1121 791 1400 — Original plug, item 8Deleted in new column; retained for older machines · 024/026; 024/026 standard tank housing: 0804 to 0821; configuration restrictions in note

Service note · 024 / 026

024/026 tank vent: inward-only mushroom valve

Fuel use admits air; stopped-engine tank pressure may remain.

X 36 348 620 — Printed production introduction for TI18/1997 tank-housing and carburetor changes only; not the undated spark-plug boot seal deletion.

  • Original two-way valve 4114 353 1600 is replaced by mushroom valve 1110 353 1600 in the revised tank configuration. Drawing 145TI016 shows the original valve LEFT and new valve RIGHT. The new valve ONLY ALLOWS AIR TO ENTER the fuel tank; it is not described as a two-way pressure-release valve.
  • Fuel consumption during operation lowers tank pressure, opening the mushroom valve so incoming air equalizes it. The arrows in 145TI017 show inward airflow. Heat from the engine or sun can build pressure while the engine is stopped. The printed precaution is to open the fuel filler cap SLOWLY so pressure releases gradually and fuel does not escape unexpectedly. No test pressure or leakage tolerance is provided.
  • The old valve remains available for older machines AND OTHER MODELS under summary remark 3. That supply statement does not authorize installing the new inward-only valve in every old housing or other model.
  • Historical TI18/1997 evidence for 024 and 026 only, not MS240/MS260 or other successors. Model-sheet links aid discovery, not universal variant fitment. Factory supply statements describe the bulletin date, not current stock. No reciprocal interchange or physical verification inferred. No hardware operation was performed.

Source: TI 18/1997, p. 1 · TI 18/1997, p. 3 — 024/026 tank vent: inward-only mushroom valve.

Part numbers (2)
  • 4114 353 1600 — Original two-way tank valveRetained for older machines and other models · 024/026; 024/026 tank vent: inward-only mushroom valve; configuration restrictions in note
  • 1110 353 1600 — New mushroom valveInward-air valve in revised housing · 024/026; 024/026 tank vent: inward-only mushroom valve; configuration restrictions in note

Service note · 024 / 026

024/026 S-shaped pickup hose: larger housing opening

New hose supplied with replacement housings for a limited historical period.

X 36 348 620 — Printed production introduction for TI18/1997 tank-housing and carburetor changes only; not the undated spark-plug boot seal deletion.

  • S-shaped fuel pickup hose 1129 358 7700 replaces original STRAIGHT hose 1121 358 7705 on the production line. The new hose REQUIRES A LARGER OPENING in the tank housing; replacement tank housings receive that same larger opening.
  • To ease changeovers, replacement tank housings are to be supplied with the new hose for ABOUT THE NEXT TWO YEARS. This is a prospective, approximate period in TI18/1997, not a present-day supply promise or a precisely dated expiration. The table lists new hose as item 4 and old straight hose separately as item 6.
  • The original straight hose remains available for older machines (remark 2). No instruction to enlarge an old hose opening, dimensions for such work, or proof of hose interchange in the original small opening is given. Do not confuse the larger fuel-hose opening with the separate air-intake molding skin discussed in section 1.3.
  • Historical TI18/1997 evidence for 024 and 026 only, not MS240/MS260 or other successors. Model-sheet links aid discovery, not universal variant fitment. Factory supply statements describe the bulletin date, not current stock. No reciprocal interchange or physical verification inferred. No hardware operation was performed.

Source: TI 18/1997, p. 1 · TI 18/1997, p. 2 · TI 18/1997, p. 3 — 024/026 S-shaped pickup hose: larger housing opening.

Part numbers (2)
  • 1121 358 7705 — Original straight pickup hose, item 6Retained for older machines · 024/026; 024/026 S-shaped pickup hose: larger housing opening; configuration restrictions in note
  • 1129 358 7700 — New S-shaped pickup hose, item 4Requires larger tank-housing opening · 024/026; 024/026 S-shaped pickup hose: larger housing opening; configuration restrictions in note

Service note · 024 / 026

024/026 tank cut-out: cover, shutter and older-filter adaptation

Molded closure may be reopened only for the stated older configurations.

X 36 348 620 — Printed production introduction for TI18/1997 tank-housing and carburetor changes only; not the undated spark-plug boot seal deletion.

  • Section 1.3 identifies COVER (026) and SHUTTER (024). Drawing 133TI028 labels cover (1) and shutter (2); these drawing callouts differ from summary-table item numbers. Table cover 1121 791 7500 is item 7; shutter 1121 791 1300 is item 2. Both remain available for older machines (remark 2).
  • With the 026 compensator air-filter system, combustion-air intake moved from the top to the bottom, BETWEEN CARBURETOR BOX COVER AND TANK HOUSING (cited TI31/1995). TI18 says the old cut-out in all saw-version housings is no longer required and is deleted, along with its cover or shutter depending on model/version.
  • Important service qualification: the cut-out is closed by a MOLDING SKIN, shown cross-hatched and arrowed in the drawing. It may be REOPENED for 026 SAWS WITH THE ORIGINAL AIR FILTER SYSTEM and for 024 saws, so their cover or shutter can be fitted. The source specifies careful drill-and-file work for an EXACT FIT. No dimensions or universal instruction to open every new housing are supplied.
  • The cited TI31/1995 page 3 separately restricts complete compensator-system installation to 026 from X 30 976 775, ONLY AS A COMPLETE ASSEMBLY with the needed lower-vent clearance. Reopening the cut-out is not authorization to retrofit that system to every 024 or older 026. Keep this older retrofit threshold distinct from TI18 production cutoff X 36 348 620. Referenced page 2 confirms the changed intake location. Existing TI31 review records remain unchanged.
  • Historical TI18/1997 evidence for 024 and 026 only, not MS240/MS260 or other successors. Model-sheet links aid discovery, not universal variant fitment. Factory supply statements describe the bulletin date, not current stock. No reciprocal interchange or physical verification inferred. No hardware operation was performed.

Source: TI 18/1997, p. 1 · TI 18/1997, p. 2 · TI 18/1997, p. 3 — 024/026 tank cut-out: cover, shutter and older-filter adaptation.

Referenced bulletin evidence: TI 31/1995, p. 2 · TI 31/1995, p. 3 — Referenced airflow location and complete-system/configuration restrictions only.

Part numbers (2)
  • 1121 791 7500 — 026 cover, drawing 1 / table 7Retained for older configurations · 024/026; 024/026 tank cut-out: cover, shutter and older-filter adaptation; configuration restrictions in note
  • 1121 791 1300 — 024 shutter, drawing 2 / table 2Retained for older configurations · 024/026; 024/026 tank cut-out: cover, shutter and older-filter adaptation; configuration restrictions in note

Service note · 024 / 026

024/026 stop buffer: left carburetor-box wall

Additional travel limiter included in the new replacement tank housing.

X 36 348 620 — Printed production introduction for TI18/1997 tank-housing and carburetor changes only; not the undated spark-plug boot seal deletion.

  • Stop buffer 1121 791 2800 is installed in the LEFT CARBURETOR BOX COVER WALL; drawing 133TI029 points to the location. It enhances the anti-vibration system by limiting buffer travel UNDER EXTREMELY HIGH LOADS, not by replacing all AV mounts.
  • The stop buffer is INCLUDED IN THE SCOPE OF SUPPLY of the new replacement tank housing and appears as new table item 5, with no original number. The historical source supplies no old-housing retrofit procedure, fastener torque or load specification. Its permanent inclusion wording is distinct from the approximate two-year hose-supply provision.
  • Historical TI18/1997 evidence for 024 and 026 only, not MS240/MS260 or other successors. Model-sheet links aid discovery, not universal variant fitment. Factory supply statements describe the bulletin date, not current stock. No reciprocal interchange or physical verification inferred. No hardware operation was performed.

Source: TI 18/1997, p. 1 · TI 18/1997, p. 3 — 024/026 stop buffer: left carburetor-box wall.

Part numbers (1)
  • 1121 791 2800 — Stop buffer, summary item 5Included in new replacement tank housing · 024/026; 024/026 stop buffer: left carburetor-box wall; configuration restrictions in note

Conditional replacement · 024 / 026

024 / 026: new fuel pickup hose

Pickup hose 1121 358 7700 replaces 1129 358 7700 on 024 and 026; the old hose remains available only while factory stocks last.

  • Section 2, figure 133TI042 KN and its one-row summary identify previous 1129 358 7700 at left and new 1121 358 7700 at right. The old hose will no longer be used on 024/026; remark 1 retains factory supply only until existing stocks are exhausted. No serial boundary is specified for this hose change.
  • The drawing distinguishes the old and new molded shapes; no length, wall thickness, fuel formulation, pressure-test procedure or clamping hardware is specified. Later exact 024 and 026 tank sheets also list 1121 358 7705, but this TI establishes only the 7700 change and no interchange with 7705.
  • TI12/1999 historical guidance for the explicitly named 024/026 configurations only. No MS successor or general part-number-prefix compatibility is inferred. Factory supply statements are historical, not current availability. No physical interchange, oil-delivery measurement or brake test was performed.

Source: TI 12/1999, p. 1 · TI 12/1999, p. 2 · TI 12/1999, p. 3 — All three original USA pages: contents, sections1–4, four figures, all summaries, remarks and serial conditions.

Part numbers (2)
  • 1129 358 7700 — Previous fuel pickup hoseDeleted from 024/026 use; stocks-only factory supply · 024 and 026; TI12/1999 section-specific conditions apply
  • 1121 358 7700 — New fuel pickup hoseReplacement specified for both models · 024 and 026; TI12/1999 section-specific conditions apply

Wrong number or missing part for the 026? Report a correction →