Stihl 1122 · Section H · 8 of 14 · 25 parts
Rewind starter
Fits 064.
Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.
Parts (25)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1122 080 1805 | Fan housing | 1 |
| 2 | 1122 080 6500 | Axle Fitment / change note → → replaced by 1122 080 6501 TI 8/1994 | 1 |
| 3 | 0000 967 2035 | Nameplate STIHL | 1 |
| 4 | 1110 084 9102 | Bushing | 1 |
| 5 | 0000 958 0607 | Washer | 1 |
| 6 | 9416 868 6530 | Hollow rivet 6.5x0.5x6.8 | 1 |
| 7 | 1122 084 9600 | Thrust pad | 1 |
| 8 | 1122 190 0600 | Rewind spring | 1 |
| 9 | 1122 195 0400 | Rope rotor | 1 |
| 10 | 1119 162 8925 | Washer Ø 12 mm | 1 |
| 11 | 1124 195 7200 | Pawl | 2 |
| 12 | 1124 195 3500 | Spring | 1 |
| 13 | 1122 084 7805 | Segment | 1 |
| 14 | 9022 313 0660 | Spline screw IS-M4x12 | 2 |
| 15 | 1122 190 3400 | Starter grip ElastoStart Ø 4,5 mm Fitment / change note → | 1 |
| 16 | 1122 190 2900 | Starter rope Ø 4.5 mm Fitment / change note → | 1 |
| 17 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 3 |
| 18 | 1121 195 3400 | Starter grip Fitment / change note → | 1 |
| 19 | 1107 195 8200 | Starter rope Ø 4.5x1000 mm Fitment / change note → | 1 |
| 20 | 0000 974 1000 | Round head rivet 3x6 | 2 |
| 21 | 1118 162 8935 | Washer | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1122 080 2105 | Fan housing with rewind starter Fitment / change note → | 1 |
| — | 0000 930 2268 | Starter rope Ø 4.5mm / 28 pieces | 1 |
| — | 1122 080 2100 NLA | Fan housing with rewind starter Fitment / change note → | 1 |
| — | 0000 930 2200 NLA | Starter rope Ø 4.5 mm x 30.5 m not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 064 / 066
064 / 066: steel starter post replaces aluminium
Fan housing 1122 080 1808 retains its number while its included starter post changes.
- Original aluminium starter post 1122 080 6500 changes to steel starter post 1122 080 6501 to reduce wear. Fan housing 1122 080 1808 retains its number and includes the new post; only the modified fan housing is factory-supplied.
- The ORIGINAL starter post remains factory-supplied only until existing stocks are exhausted. This availability distinction does not mean both fan-housing versions remain available. No post installation/removal procedure, dimension, or blanket interchange guarantee is provided.
- TI08/1994 names historical 064 and 066, series 1122, not later MS models. All six changes are in progress; no numeric serial cutoff is supplied. Publication date is January 31, 1994; 08.94 is the bulletin identifier, not an August production date. MOQ columns are commercial order quantities, not installed counts. No physical interchange test was performed.
Source: TI 8/1994, p. 3 · TI 8/1994, p. 4 — steel starter post replaces aluminium.
Part numbers (3)
- 1122 080 1808 — Fan housing including starter postunchanged number · steel starter post replaces aluminium
- 1122 080 6500 — Aluminium starter postoriginal; while stocks last · steel starter post replaces aluminium
- 1122 080 6501 — Steel starter postnew version · steel starter post replaces aluminium
Service note · 064 / 066
064 / 066: rewind spring uses disposable sheetmetal holder
1128 190 0600 changes to 1129 190 0600; the original spring housing is deleted.
- Replacement rewind springs for 064/066 will be supplied in a sheetmetal holder of the type introduced with the launch of 020 T. This mention is timing/design context, NOT an assignment of every listed 064/066 component to 020 T.
- The original spring housing is deleted. The sheetmetal holder can be scrapped AFTER installing the rewind spring; it is not a replacement housing to retain in service. Claimed benefits are lower weight, one fewer part to wear, cheaper replacement and improved service friendliness; no quantified performance is supplied.
- Rewind spring 1128 190 0600 changes to 1129 190 0600. Original spring remains factory-supplied only until existing stocks are exhausted. The drawing and text are not a complete tensioned-spring installation procedure. Prior TI20.93 is a reference, not reviewed here by proxy.
- TI08/1994 names historical 064 and 066, series 1122, not later MS models. All six changes are in progress; no numeric serial cutoff is supplied. Publication date is January 31, 1994; 08.94 is the bulletin identifier, not an August production date. MOQ columns are commercial order quantities, not installed counts. No physical interchange test was performed.
Source: TI 8/1994, p. 4 — rewind spring uses disposable sheetmetal holder.
Part numbers (2)
- 1128 190 0600 — Rewind springoriginal; while stocks last · rewind spring uses disposable sheetmetal holder
- 1129 190 0600 — Rewind spring with sheetmetal holdernew version · rewind spring uses disposable sheetmetal holder
Service note · 064
064: ElastoStart grip, rope and starter assembly
ElastoStart begins at a different cutoff from the front-handle change; the new grip is not separately supplied.
X 30 802 442 — 064 ElastoStart introduction only; not the front-handle cutoff.
- From X 30 802 442, the 064 receives an ElastoStart grip for improved starting comfort. Figure 137TI001 shows its internal grip construction in two states; the drawing supplies no dimensions or numerical force limits. Construction, function and repair are referred to TI 37/1991 (066), NOT reproduced as a complete procedure here. That exact TI is not in the retained 690-bulletin corpus or the mounted STIHL service documentation extracted filename inventory; the referral remains unverified, not a global absence claim.
- Fan housing with rewind starter 1122 080 2100 becomes 1122 080 2105, including table items 1–3. ElastoStart 1122 190 3400 is key 1, includes item 2 (rope), and has no old number. Rope 1107 195 8200 becomes 1122 190 2900 (key 2, MOQ 1). Old grip 1121 195 3400 is key 3; its new-column symbol is NOT a new part number.
- Remark 1 retains original versions for older machines. Rope and grip also carry remark 2, availability for other models. Remark 3 explicitly says the NEW GRIP is NOT AVAILABLE SEPARATELY. Do not invent a new separate-grip number or claim all components are mutually interchangeable. Other MOQ cells are blank, not zero. The table inclusion range 1–3 and the separate-grip supply restriction are both retained.
- Historical TI 45/1994 guidance, not current stock, universal compatibility or physical verification. No hardware operation was performed.
Source: TI 45/1994, p. 1 — ElastoStart grip, rope and starter assembly.
Part numbers (6)
- 1122 080 2100 — Original fan housing with rewind starterolder-machine availability · 064 only in the version/configuration described here
- 1122 080 2105 — New fan housing with rewind starterincludes 1–3 · 064 only in the version/configuration described here
- 1122 190 3400 — ElastoStart; key 1includes rope 2 · 064 only in the version/configuration described here
- 1107 195 8200 — Original starter rope; key 2older/other models · 064 only in the version/configuration described here
- 1122 190 2900 — New starter rope; key 2MOQ 1 · 064 only in the version/configuration described here
- 1121 195 3400 — Original starter grip; key 3new grip not separately available · 064 only in the version/configuration described here
Wrong number or missing part for the 064? Report a correction →