Stihl 1122 · Section J · 9 of 14 · 47 parts
Tank housing
Fits 064.
Historical fitment & changes (5) — includes parts and conditions not shown on this drawing.
Parts (47)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1122 350 0816 | Tank housing Fitment / change note → | 1 |
| 2 | 1122 120 0102 | Carburetor housing Fitment / change note → | 1 |
| 3 | 1122 122 6602 | Collar screw | 2 |
| 4 | 1122 141 1805 | Sleeve | 1 |
| 5 | 1122 141 2201 | Manifold | 1 |
| 6 | 1128 121 8600 | Washer | 1 |
| 7 | 9104 003 0650 | Self-tapping screw P4x10 | 7 |
| 8 | 1122 350 5851 NLA | Tank vent Fitment / change note → | 1 |
| 9 | 1120 358 8105 | Vent insert Fitment / change note → | 1 |
| 10 | 1122 353 0200 NLA | Clamp Fitment / change note → | 1 |
| 11 | 1110 353 1600 | Valve Fitment / change note → | 1 |
| 12 | 1128 791 8400 | Ring | 1 |
| 13 | 0000 967 3662 | Warning pictogram MS | 1 |
| 14 | 0000 963 0808 | Bushing | 1 |
| 15 | 1122 790 9920 | Annular buffer 1122/20 | 1 |
| 16 | 9022 341 0980 | Spline screw IS-M5x16 | 1 |
| 17 | 1124 358 7700 | Hose | 1 |
| 18 | 1122 353 2600 | Elbow connector | 1 |
| 19 | not sold separately | Hose 3.1x5.7x52 mm, R5 not available as a separate item | 1 |
| 20 | 0000 350 3504 | Pickup body | 1 |
| 21 | 1127 141 8600 | Impulse hose | 1 |
| 22 | 0000 989 0812 | Grommet | 1 |
| 23 | 1122 182 0700 | Grommet | 1 |
| 24 | 1122 123 7503 | Grommet Fitment / change note → | 1 |
| 25 | 1122 180 0905 | Switch shaft → replaced by 1122 182 0902 TI 1/1998 | 1 |
| 26 | 1122 442 1603 | Contact spring | 1 |
| 27 | 1122 442 2500 | Axle | 1 |
| 28 | 1122 182 2100 | Support | 1 |
| 30 | 9371 470 2600 | Cylindrical pin 5x16 | 1 |
| 31 | 1122 182 1502 | Throttle rod | 1 |
| 32 | 1117 182 4500 | Torsion spring | 1 |
| 33 | 1117 182 0805 | Lockout lever | 1 |
| 34 | 1122 791 0600 | Handle molding | 1 |
| 35 | 9074 478 3076 | Pan head self-tapping screw IS-P4x19 | 1 |
| 36 | 0000 350 0508 | Filler cap | 1 |
| 37 | 0000 359 1203 | Sealing ring | 1 |
| 38 | 0000 359 1230 | Sealing ring | 1 |
| 39 | 0000 350 0900 | Rope | 1 |
| 40 | 0000 353 0600 | Hook | 1 |
| 41 | 1122 122 6601 NLA | Collar screw | 2 |
| 42 | 1122 141 2200 NLA | Manifold | 1 |
| 43 | 1122 141 2000 NLA | Shim | 1 |
| 44 | 1111 129 1100 | Gasket | 1 |
| 45 | 0000 992 7101 | Sealing ring | 1 |
| 46 | 1119 358 7701 | Hose | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1122 350 0854 | Tank housing | 1 |
| — | 0000 937 5004 | Hose 3.1x5.7 mm x 1 m, R5 not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · 064 / 066
064 / 066: revised tank-vent package without the extra 044/046 ring
1122 350 5851 replaces the earlier package; the added ring is not required on 064/066.
- Section 2 replaces complete tank vent 1122 350 5850 with 1122 350 5851 in connection with 044/046 changes. The summary says introduction is in progress, with no numeric serial. The previous complete vent is no longer available from the factory (remark 1); this is a 1999 supply statement.
- The new complete vent includes items 2–4: tank vent 1122 350 5802 and thrust ring 1122 353 0200 retain their numbers, while thrust ring 1128 353 0200 is added. Remark 2 requires the added 1128 ring only for 044 and 046; inclusion in the package is not a requirement to install it on 064/066.
- A detailed instruction sheet is supplied with the vent. It is not reproduced here and was not identified in the bounded 43-file retained docs inventory. Its full installation procedure remains a named source gap; do not infer it from this parts table. TI36/1997 is retained and pending separate review, not missing or automatically reviewed by this citation.
- TI01/1998 separately describes the later 066 protected-housing vent 1122 350 5803 and retains 1122 350 5850 for older machines. This 1999 replacement of that earlier package is not evidence to remove a protected-housing vent or retrofit every 066. Confirm the installed housing; no 1998 serial limit is silently reapplied as a new 1999 cutoff.
- Historical TI52/1999 instructions and spare-availability statements are not present stock or physical interchange verification. Base-model catalog sheets are navigation anchors; printed R/M variant restrictions remain controlling. No applicability to MS 640, MS 650 or MS 660 is inferred.
Source: TI 52/1999, p. 2 — Section 2, complete four-row summary and both remarks.
Part numbers (4)
- 1122 350 5850 — Complete tank vent, previousReplaced; no longer factory-supplied in this TI · 064 / 066 earlier tank-vent arrangement; not every 066 housing
- 1122 350 5851 — Complete tank vent, newIncludes items 2–4; installation is model-specific · 064 / 066 earlier tank-vent arrangement; not every 066 housing
- 1122 350 5802 — Tank vent componentUnchanged item 2 · 064 / 066 earlier tank-vent arrangement; not every 066 housing
- 1122 353 0200 — Thrust ringUnchanged item 3 · 064 / 066 earlier tank-vent arrangement; not every 066 housing
Conditional replacement · 064
064: revised carburetor-adjustment screwdriver grommet
Grommet 1122 123 7503 replaces 1122 123 7500 from 1 45 498 144.
1 45 498 144 — Production introduction for this specific modification only; not proof of an individual saw’s installed configuration.
- The grommet guides the screwdriver for carburetor adjustment. From serial 1 45 498 144, 1122 123 7500 is replaced by 1122 123 7503. The previous grommet is no longer available from the factory (summary remark 1).
- This is the 064-only grommet cutoff, not the 066 crankcase cutoff 1 45 500 383 or the shared hand-guard cutoff 1 44 673 876. No dimensions, adjustment settings or extension to 066 are supplied.
- Historical TI52/1999 instructions and spare-availability statements are not present stock or physical interchange verification. Base-model catalog sheets are navigation anchors; printed R/M variant restrictions remain controlling. No applicability to MS 640, MS 650 or MS 660 is inferred.
Source: TI 52/1999, p. 3 — Section 4 full prose, summary and remark.
Part numbers (2)
- 1122 123 7500 — 064 screwdriver guide grommetPrevious; historical factory unavailability · 064 only; carburetor-adjustment screwdriver guide
- 1122 123 7503 — 064 screwdriver guide grommetNew version · 064 only; carburetor-adjustment screwdriver guide
Service note · 064 / 066
064 / 066: 1997 tank vent and housing modification
TI36/1997 introduces vent 1122 350 5850 from X 38 139 451, with a 5.6 mm housing hole and unchanged housing numbers. Later 066 guidance is linked separately.
Later reviewed guidance: 066 wider housing and protected tank vent · 064 / 066: revised tank-vent package without the extra 044/046 ring
X 38 139 451 — Introduction of the described 064/066 tank-vent modification; not a universal model/part interchange boundary.
- The modified vent discharges into the gap between the carburetor housing and shroud. Introduction is from machine number X 38 139 451 for the named 064/066 modification; this is not a model-identification range or proof of interchange with later vents.
- Tank housing 1122 350 0816 (including summary items 1–6) and carburetor housing 1122 120 0102 retain their numbers. Only the modified housing versions were available from the factory. Numbers alone therefore do not identify the molding state; inclusion keys do not require refitting the deleted cap/filter.
- Service sequence, page 1: remove carburetor box cover and air filter; drill the carburetor housing at the molding skin indicated by the arrow, diameter 5.6 mm (printed 0.22 inch), then carefully remove drill shavings. No coordinate, substitute drilling location or added tolerance is supplied; use the original drawing, not a dimension inferred from its scale.
- Page 2: remove the old cap and filter; place the tank vent in position. Grip it with suitable pliers as illustrated and seat it by tapping the pliers once or twice with a mallet. Slip the thrust piece over the vent in the illustrated orientation.
- Page 3: use suitable pliers to press the thrust piece home by tapping once or twice with a mallet. Push the vent through the carburetor housing into the gap; install the air filter and carburetor box cover. The figures show where the pliers bear; no seating force, depth or torque is printed.
- The vent assembly 1122 350 5850 includes vent insert 1120 358 8105 and thrust piece 1122 353 0200 (items 3–4). The insert was already in inventory. Original cap 1121 358 2500 and filter 1121 358 1800 are deleted for this modification but remained available for other, unnamed models; that is not fitment evidence for any particular other model.
- The printed instruction to always install 1122 350 5850 as a replacement is bounded to this 1997 configuration. The same summary limits supply of that vent to the end of 1999. These statements do not prove current availability, or override the later 066 vent/housing revision and later 064/066 package guidance linked below.
- Last-TI entries 08/1997 for 064 and 15/1997 for 066 are bibliographic references, not missing prerequisites to this printed sequence. Historical instructions only; no physical retrofit or leak-test result is claimed.
Source: TI 36/1997, p. 1 · TI 36/1997, p. 2 · TI 36/1997, p. 3 — Complete service sequence, all illustrations, summary inclusion keys and four availability remarks.
Part numbers (7)
- 1122 350 0816 — Tank housing including items 1–6Same number, modified housing · 064 / 066; TI36/1997 configuration only
- 1122 120 0102 — Carburetor housingSame number, modified housing · 064 / 066; TI36/1997 configuration only
- 1122 350 5850 — Tank vent including insert and thrust pieceNew assembly / historically time-limited spare · 064 / 066; TI36/1997 configuration only
- 1120 358 8105 — Vent insertExisting inventory; vent assembly component · 064 / 066; TI36/1997 configuration only
- 1122 353 0200 — Thrust pieceVent assembly component · 064 / 066; TI36/1997 configuration only
- 1121 358 2500 — CapDeleted for this modification; other unnamed models only · 064 / 066; TI36/1997 configuration only
- 1121 358 1800 — FilterDeleted for this modification; other unnamed models only · 064 / 066; TI36/1997 configuration only
Service note · 064 / 066
064 / 066: larger pickup filter has different component stock limits
New complete pickup replaces the old one; old filter remains, but old weight and cap last only while stocks do.
X 29 412 876 — Printed introduction for this component only; not a universal machine cutoff or interchange guarantee.
- From X 29 412 876, pickup body 0000 350 3500 replaces 1115 350 3503 with a larger filter area to enhance operation and standardize parts. Original complete pickup is no longer factory-available. This cutoff is separate from the 066 crankshaft change at X 29 588 002.
- Drawing shows original pickup exploded into filter (1), weight (2) and cap (3), alongside new complete pickup. Original filter 1110 358 1800 REMAINS available for older machines; NEW filter is NOT separately available (-*- is not an order number). Original weight 1115 358 8200 and cap 1115 358 2500 remain supplied ONLY WHILE STOCKS LAST. Do not apply their stock-exhaustion limit to the retained original filter.
- No new weight/cap numbers or S-shaped-hose pairing are specified here. Other-model standardization is not permission for unlisted model interchange. Previous-TI pointer 08.94 is a reference, not another completed review. Original footer is March 11, 1994.
- Historical TI 19/1994 guidance for explicitly named models only; no successor or unlisted variant applicability inferred. Factory supply statements are historical, not current stock claims. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.
Source: TI 19/1994, p. 2 — 064 / 066: larger pickup filter has different component stock limits.
Part numbers (5)
- 1115 350 3503 — Original complete pickup bodyno longer factory-available · 064 / 066: larger pickup filter has different component stock limits
- 0000 350 3500 — Larger-filter pickup bodynew complete replacement · 064 / 066: larger pickup filter has different component stock limits
- 1110 358 1800 — Original filter, item 1retained spare; new filter assembly-only · 064 / 066: larger pickup filter has different component stock limits
- 1115 358 8200 — Original weight, item 2while stocks last · 064 / 066: larger pickup filter has different component stock limits
- 1115 358 2500 — Original cap, item 3while stocks last · 064 / 066: larger pickup filter has different component stock limits
Service note · 064 / 066
064 / 066: one-way mushroom vent and retained-pressure warning
Tank housing number unchanged; cap/filter predate the valve change, with their own printed range.
X 35 661 524 — Tank valve modification only; cap/filter prior range separately retained.
- From X 35 661 524, mushroom valve 1110 353 1600 replaces original two-way valve 4114 353 1600 in tank housing 1122 350 0816. Housing includes items 2–4 (cap, filter, valve) and keeps its number; all other parts remain as before. Only the modified housing is factory supplied in this historical notice.
- Cap 1121 358 2500 and filter 1121 358 1800 keep their numbers. Remark 2 says these parts are ALREADY installed from X 34 687 772 TO X 35 661 523. This is the stated prior cap/filter range, not a second introduction of the mushroom valve or an ending serial for the unchanged cap/filter.
- Original two-way valve remains available FOR OTHER MODELS (remark 3), not an unrestricted alternative on this modification. The new mushroom valve is already in inventory (remark 4). No exact list of other models is supplied.
- Air enters through the new valve as fuel volume falls, but cannot flow from INSIDE OUTWARDS. Pressure can therefore build with the engine STOPPED if fuel is heated by sunlight or other influences. Source warning: always open the filler cap SLOWLY to release excess pressure gradually and avoid unexpected fuel escape. Better pressure equalization does not mean outward venting or a pressure-free tank.
- Figure145TI016 compares original1 and new2; arrows in145TI017 show inward flow. No opening pressure, vent-test value, machining instruction or complete retrofit procedure is given.
- Historical TI08/1997 evidence for the stated 064/066 configurations only. Independent modification cutoffs are not whole-model identification ranges, current stock claims or blanket retrofit permission. No MS640/MS660 successor scope or tested physical interchange is inferred. No hardware operation was performed.
Source: TI 8/1997, p. 1 · TI 8/1997, p. 2 — 064 / 066: one-way mushroom vent and retained-pressure warning.
Part numbers (5)
- 1122 350 0816 — Tank housing including cap/filter/valveUnchanged assembly number; modified contents · 064 / 066; only the described configuration
- 1121 358 2500 — Vent cap, item2Unchanged; earlier stated range · 064 / 066; only the described configuration
- 1121 358 1800 — Vent filter, item3Unchanged; earlier stated range · 064 / 066; only the described configuration
- 4114 353 1600 — Original two-way valveReplaced here; supply retained for other models · 064 / 066; only the described configuration
- 1110 353 1600 — New mushroom valveReplacement; already in inventory · 064 / 066; only the described configuration
Wrong number or missing part for the 064? Report a correction →