← 021/023/025 · MS 210/230/250

Stihl 1123 · Section D · 4 of 19 · 39 parts

Engine housing

Fits 021, 023, 025.

Parts diagrams →

Historical fitment & changes (7) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202123242526262727282933031323334353644056789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (39)

PosPart numberDescriptionQty
1 1123 020 3003 Engine housing 1
2 1123 020 3004 Engine housing 1
3 1128 640 9100 Valve Fitment / change note → 1
4 1123 162 7800 Flat spring Fitment / change note → 1
5 1123 664 2400 Collar screw Fitment / change note → 2
6 0000 989 0816 Grommet Fitment / change note → 1
7 1123 790 9900 Annular buffer 1
8 1123 790 9900 Annular buffer 2
9 1123 790 9901 Annular buffer 1
10 9075 478 4155 Pan head self-tapping screw IS-D5x24 3
11 1123 790 9901 Annular buffer 1
12 1123 791 7300 Plug 3
13 1120 664 1500 Tensioning nut 1
14 1123 664 1605 Adjusting screw 1
15 1123 664 2205 Cover 1
16 not sold separately Spur gear optionnot available as a separate item 1
17 not sold separately Adjusting screw optionnot available as a separate item 1
18 1123 640 1900 Tensioner slide option 1
19 1123 664 1400 Thrust pad option 1
20 1123 664 2200 Cover option 1
21 9075 478 3015 Pan head self-tapping screw IS-D4x15 option 1
23 9645 948 2470 O-ring 23x3 1
24 0000 350 0510 Filler cap Fitment / change note → 1
25 0000 359 1210 Sealing ring Fitment / change note → 1
26 0000 350 0900 Rope Fitment / change note → 1
27 0000 353 0600 Hook 1
28 0000 350 0525 Filler cap 1
29 9645 948 7734 O-ring 25x3.5 1
30 0000 350 0520 Filler cap Fitment / change note → → replaced by 1127 350 0500 TI 48/1995 1
31 0000 359 1220 Sealing ring Fitment / change note → 1
32 1117 350 5800 Tank vent → replaced by 0000 350 5802, 0000 350 5800 TI 5/2002 1
33 1120 358 8105 Vent insert 2
34 1123 358 7703 Hose 1
35 0000 350 3500 Pickup body Fitment / change note → 1
36 0000 967 3662 Warning pictogram MS 1
40 0000 974 1200 Notched pin 2.6x8 Fitment / change note → 1
Not numbered on the diagram — assemblies, kits and options
— 1123 007 1000 Chain tensioner kit option 1
— 1123 007 1004 Spur gear / chain adjusting screw kit option 1
— 1123 350 3651 Set hose / pick-up body 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · 021 / 023 / 025

021 / 023 / 025 easy start: engine and handle housing inclusion boundaries

Engine housing includes items 2–4; handle housing includes collar screw 7.

  • Engine housing 1123 020 3006 (item 1) includes valve 1128 640 9100 (2), notched pin 2.6x8 0000 974 1200 (3) and collar screw 1123 664 2400 (4). This valve is not decompression valve 1123 020 9400 or primer non-return valve. No valve function beyond this roster is inferred.
  • Handle housing 1123 790 1008 (6) includes collar screw 1125 122 6600 (7). Tank grommet 0000 989 0816 is separately item 5, not within the printed engine-housing items 2–4 or handle-housing item 7 inclusion. The primer service requires the grommet for sealing.
  • Items 2, 3, 4, 7 carry remark 1: included in other versions of 021/023. It is not a new blanket 025 cross-version claim. No unchanged old housing number or whole-system retrofit is stated.
  • Historical TI 10/1994 guidance for the named 021/023/025 variants, not MS 210/MS 230/MS 250 successors or later starting systems. Page 6 remark 1 says parts are included in other versions of 021/023; it does not independently extend that remark to 025. MOQ is a commercial order quantity, not a fitting quantity. No physical interchange test was performed.

Source: TI 10/1994, p. 5 · TI 10/1994, p. 6 — 021 / 023 / 025 easy start: engine and handle housing inclusion boundaries.

Part numbers (7)
  • 1123 020 3006 — Engine housing, item 1includes 2–4 · 021 / 023 / 025 easy start: engine and handle housing inclusion boundaries
  • 1128 640 9100 — Valve, item 2included; remark 1 · 021 / 023 / 025 easy start: engine and handle housing inclusion boundaries
  • 0000 974 1200 — Notched pin 2.6x8, item 3included; remark 1 · 021 / 023 / 025 easy start: engine and handle housing inclusion boundaries
  • 1123 664 2400 — Collar screw, item 4included; remark 1 · 021 / 023 / 025 easy start: engine and handle housing inclusion boundaries
  • 0000 989 0816 — Rubber grommet, item 5separate roster item · 021 / 023 / 025 easy start: engine and handle housing inclusion boundaries
  • 1123 790 1008 — Handle housing, item 6includes 7 · 021 / 023 / 025 easy start: engine and handle housing inclusion boundaries
  • 1125 122 6600 — Collar screw, item 7included; remark 1 · 021 / 023 / 025 easy start: engine and handle housing inclusion boundaries

Service note · 021 / 023 / 025

021 / 023 / 025: filler-cap hook removal depends on housing eye

Revised fuel and oil tanks take the retainer cord directly; service caps still come with a hook.

X 28 020 718 — Printed introduction for this component only; not a universal machine cutoff or interchange guarantee.

  • From X 28 020 718, cord (1) clips directly into an eye in the engine housing; hook (2) is deleted on the production line. New housings have cord eyes in BOTH fuel and oil tanks. Engine-housing part number remains unchanged; no numeric housing or cap part number is printed here.
  • Replacement filler caps continue to be supplied WITH a hook. Remove that hook BEFORE fitting the cap in a housing equipped with a cord eye. This conditional service instruction does not delete the hook from older housings without an eye; the drawing distinguishes cord (1) from hook (2).
  • Historical TI 13/1994 guidance for the explicitly named models only; no successor or unlisted variant applicability inferred. Factory supply statements are historical, not current stock claims. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 13/1994, p. 1 — 021 / 023 / 025: filler-cap hook removal depends on housing eye.

No additional parts-table entry added.

Service note · 021 / 023 / 025

021 / 023 / 025: larger pickup requires the S-shaped hose

Fuel hose and pickup are paired in temporary service set 1123 350 3650.

  • Hose 1123 358 7700 changes to 1123 358 7701. Pickup body 1120 350 3500 changes to 0000 350 3500 with a larger filter area. The new pickup can ONLY be installed together with the S-shaped hose. Page 3 drawing shows original on left and new bent hose/pickup on right; no unrestricted pickup-only retrofit is admitted.
  • Set 1123 350 3650 includes hose 1123 358 7701 (item 1) and pickup 0000 350 3500 (item 2), offered for ABOUT three years in this historical bulletin, not a current availability promise or exact end date. The new hose and pickup also have individual rows; that does not remove the mandatory pairing.
  • Original hose and pickup are no longer factory-available. Introduction in progress with no serial; page 4 continues the page 3 table. This pairing is for the cover models, not every machine using the same pickup number.
  • Historical TI 13/1994 guidance for the explicitly named models only; no successor or unlisted variant applicability inferred. Factory supply statements are historical, not current stock claims. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 13/1994, p. 3 · TI 13/1994, p. 4 — 021 / 023 / 025: larger pickup requires the S-shaped hose.

Part numbers (5)
  • 1123 358 7700 — Original fuel intake hoseno longer factory-available · 021 / 023 / 025: larger pickup requires the S-shaped hose
  • 1123 358 7701 — S-shaped fuel intake hose, item 1required with new pickup · 021 / 023 / 025: larger pickup requires the S-shaped hose
  • 1120 350 3500 — Original pickup bodyno longer factory-available · 021 / 023 / 025: larger pickup requires the S-shaped hose
  • 0000 350 3500 — Larger-filter pickup body, item 2requires S-shaped hose · 021 / 023 / 025: larger pickup requires the S-shaped hose
  • 1123 350 3650 — Hose and pickup set, items 1–2historical temporary service set · 021 / 023 / 025: larger pickup requires the S-shaped hose

Service note · 021 / 023 / 025

021 / 023 / 025: flat brake spring fits old and new engine housings

Original cam lever cannot be reused with a new housing on an older machine.

X 28 310 255 — Printed component-specific introduction, not a universal machine cutoff or unrestricted interchange guarantee.

  • FROM X 28 310 255, flat spring 1123 162 7800 replaces cam lever 1123 162 5010 and helical spring 0000 997 0628. New engine housing deletes cam pivot hole and helical-spring anchor pin, adding flat-spring support rib.
  • On machines UP TO X 28 310 254, fitting NEW engine housing means original cam lever CANNOT BE USED. Each new replacement housing includes flat spring. For chain-brake repair flat spring can fit BOTH ORIGINAL AND NEW housing versions. Do not infer cam lever fits new housing.
  • Engine housings retain numbers 1123 020 3005 (standard) and 1123 020 3006 (easy start). Notched pin 2.6x 8 0000 974 1200 deleted here; pin and helical spring remain available for older machines/other models. Old cam and unmodified housings only until stocks exhausted. Table says each housing includes items 1/2 across old/new columns, not both deleted pin and flat spring in new housing. MOQ 10 is not ten fitted springs.
  • Historical TI 26/1994 guidance only. No successor or unlisted model applicability inferred. Factory supply and warranty statements are historical, not current availability or entitlement. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 26/1994, p. 1 · TI 26/1994, p. 2 — 021 / 023 / 025: flat brake spring fits old and new engine housings.

Part numbers (6)
  • 1123 162 5010 — Cam leverold; stocks only · 021 / 023 / 025: flat brake spring fits old and new engine housings
  • 0000 997 0628 — Helical springold; retained for older/other machines · 021 / 023 / 025: flat brake spring fits old and new engine housings
  • 1123 162 7800 — Flat springnew; both housing versions · 021 / 023 / 025: flat brake spring fits old and new engine housings
  • 1123 020 3005 — Standard engine housingsame number · 021 / 023 / 025: flat brake spring fits old and new engine housings
  • 1123 020 3006 — Easy-start engine housingsame number · 021 / 023 / 025: flat brake spring fits old and new engine housings
  • 0000 974 1200 — Notched pin2.6x8deleted here; older/other machines · 021 / 023 / 025: flat brake spring fits old and new engine housings

Service note · 021 / 023 / 025

021 / 023 / 025 engine housings supplied with filler caps

Same-number standard/easy-start housings include both cap assemblies.

  • Standard engine housing 1123 020 3005 and EASY START engine housing 1123 020 3006 retain their SAME NUMBERS. Both are supplied complete with oil and fuel filler caps to protect the threads during shipment; this is a scope-of-supply change, not evidence of altered thread geometry.
  • Each housing includes items 1–5: filler cap 0000 350 0510 (item 1) includes cord 0000 350 0900 (item 2) and sealing ring 0000 359 1210 (item 3). Filler cap 0000 350 0520 (item 4) includes the same cord number (item 2) and sealing ring 0000 359 1220 (item 5). Figure repeats item 2 at the two cap assemblies; do not treat the shared item number as only one cord for the entire housing.
  • Only the modified supply version of the housings is available from factory; all listed parts are marked existing parts. Introduction IN PROGRESS, no serial cutoff. The table names both rows simply filler cap; no new ordering number or unprinted quantity is invented.
  • Later shared engine-housing sheet D keys 1/2 instead lists 1123 020 3003/3004. This difference does not prove a 3005/3006-to-3003/3004 supersession, equivalence or deletion of the historical easy-start distinction. D keys 24–26 and 30–31 retain the named cap, rope and seal numbers.
  • Historical TI guidance for the named models and stated versions only. Shared IPL sheets or series do not extend applicability to other variants or successor models. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.

Source: TI 29/1995, p. 2 — Section 3.1 supply, figure 135TI023 SC and complete summary.

Part numbers (7)
  • 1123 020 3005 — Standard engine housingsame-number revised scope of supply · 021 / 023 / 025; Section 3.1 supply, figure 135TI023 SC and complete summary
  • 1123 020 3006 — Easy-start engine housingsame-number revised scope of supply · 021 / 023 / 025; Section 3.1 supply, figure 135TI023 SC and complete summary
  • 0000 350 0510 — Filler capincluded item 1 with items 2/3 · 021 / 023 / 025; Section 3.1 supply, figure 135TI023 SC and complete summary
  • 0000 350 0900 — Cordincluded item 2 in both cap assemblies · 021 / 023 / 025; Section 3.1 supply, figure 135TI023 SC and complete summary
  • 0000 359 1210 — Sealing ringincluded item 3 · 021 / 023 / 025; Section 3.1 supply, figure 135TI023 SC and complete summary
  • 0000 350 0520 — Filler capincluded item 4 with items 2/5 · 021 / 023 / 025; Section 3.1 supply, figure 135TI023 SC and complete summary
  • 0000 359 1220 — Sealing ringincluded item 5 · 021 / 023 / 025; Section 3.1 supply, figure 135TI023 SC and complete summary

Service note · 021 / 023 / 025

021 / 023 / 025 quick tensioner: replace rear housing stud

Replacement housing needs collar screw 2402; slow stud removal protects threads.

  • Replacement standard housing 1123 020 3005 and easy-start housing 1123 020 3006 arrive with TWO COLLAR STUDS OF THE SAME LENGTH. For a saw WITH QUICK CHAIN TENSIONER, the REAR stud (1) MUST be replaced by collar screw 1123 664 2402 (2). The screw may be transferred from the faulty housing or ordered separately. This is conditional conversion of the replacement housing, not a change to every standard-tensioner saw.
  • Use M8 stud puller 5910 893 0501 to unscrew the rear stud SLOWLY from the replacement housing: removing it too quickly may damage the housing thread. Remove the collar screw from the faulty housing when reusing it. Apply a LITTLE OIL to the new or original screw thread; oil grade and numerical extraction speed are not specified.
  • Position screw in replacement-housing hole, rotate COUNTERCLOCKWISE UNTIL IT DROPS DOWN SLIGHTLY, then screw home CLOCKWISE to APPROXIMATELY 8 Nm (6.0 lbf.ft). Its collar MUST BUTT AGAINST THE ENGINE HOUSING like the original stud. Do not replace this thread-engagement step with a cutting or drilling operation.
  • Install the engine housing as described in the service manual and fit the REQUIRED longer-spike bumper 1123 664 0501; its separate mounting torque is 3.7 Nm (2.8 lbf.ft), not the collar screw torque. TI 42/1994 is cited and retained locally; this note does not reproduce the full engine-housing replacement procedure.
  • Later quick-tensioner sheet E key 10 lists 2402. Later housing sheet D lists 3003/3004 instead of the TI 3005/3006; that difference is not a proven supersession. Figures identify the rear location and seated collar, not a numerical stud-length specification.
  • Historical TI guidance for the named models and stated versions only. Shared IPL sheets or series do not extend applicability to other variants or successor models. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.

Source: TI 29/1995, p. 3 — Section 3.2 collar-stud conversion and figures 135TI024/025 SC.

Part numbers (5)
  • 1123 020 3005 — Standard replacement engine housingtwo equal-length studs supplied · 021 / 023 / 025; Section 3.2 collar-stud conversion and figures 135TI024/025 SC
  • 1123 020 3006 — Easy-start replacement engine housingtwo equal-length studs supplied · 021 / 023 / 025; Section 3.2 collar-stud conversion and figures 135TI024/025 SC
  • 1123 664 2402 — Rear collar screwrequired for quick tensioner · 021 / 023 / 025; Section 3.2 collar-stud conversion and figures 135TI024/025 SC
  • 5910 893 0501 — M8 stud pullerslow removal of rear stud · 021 / 023 / 025; Section 3.2 collar-stud conversion and figures 135TI024/025 SC
  • 1123 664 0501 — Longer-spike bumpermandatory companion requirement · 021 / 023 / 025; Section 3.2 collar-stud conversion and figures 135TI024/025 SC

Historical fitment · 021 / 023 / 025

021/023/025: quick-tensioner stiffener retrofit

Added stiffener reinforces the bar mounting flange; the kit number stays unchanged.

  • Section 1: stiffener 1123 021 2800 is installed IN THE ENGINE HOUSING to increase rigidity at the bar mounting flange. Drawing 135TI030 shows its location; this is not a chain-cover washer or a replacement bar stud.
  • The stiffener CAN BE BACKFITTED to machines WITH A QUICK CHAIN TENSIONER brought in for repair or servicing. This does not establish fitment to standard-tensioner machines or a complete standard-to-quick conversion procedure.
  • Quick chain tensioner kit 1123 007 1008 retains the SAME original/new number and now includes item 2, stiffener 1123 021 2800. Only the modified kit is available from the factory under remark 1. An older kit bearing the same number is not proof that the stiffener is present.
  • Later SCS 01-2012 sheet E lists the stiffener as Insert at key 15 and marks kit 1008 no longer available. These later catalog labels do not negate the 1996 inclusion/backfit statement or promise current availability.
  • Historical TI24/1996 guidance only. No serial cutoff is stated; introduction is in progress, not a verified calendar date. Shared IPL sheets do not extend applicability to other variants or MS successor models. Supply statements are historical, not present stock guarantees. No hardware operation was performed.

Source: TI 24/1996, p. 1 — 021/023/025: quick-tensioner stiffener retrofit.

Part numbers (2)
  • 1123 007 1008 — Quick chain tensioner kit, including stiffenerSame-number revised kit · 021/023/025 with quick chain tensioner
  • 1123 021 2800 — Stiffener for bar mounting flangeNew; conditional retrofit · 021/023/025 with quick chain tensioner

Wrong number or missing part for the 021, 023, 025? Report a correction →