← 044/046 · MS 440/460/461

Stihl 1128 · Section K · 10 of 17 · 32 parts

AV system

Fits 044.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202122232425262728293444404141425667789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (32)

PosPart numberDescriptionQty
1 1128 791 8401 Ring 1
2 1128 791 8400 Ring 1
3 1122 790 9905 Annular buffer 1122/05 1
4 9074 478 4435 Pan head self-tapping screw IS-P6x19 3
5 1122 791 7301 Plug 1
6 1121 790 9904 Annular buffer 2
7 1125 791 7306 Plug 2
8 1128 790 9909 Annular buffer 1
9 9416 868 5630 Hollow rivet 5.5x0.5x6.8 2
10 9022 313 0680 Spline screw IS-M4x16 2
11 1128 791 7200 Sleeve 1
12 1128 792 8500 Hose 1
13 9074 478 4675 Pan head self-tapping screw IS-P6x32.5 1
14 1125 790 9910 Annular buffer 1125/10 1
15 1125 790 9904 Annular buffer 1125/04 1
16 1128 790 9911 Annular buffer 1
17 1133 791 5900 Stop buffer 1
18 1128 141 2203 Manifold → replaced by 1128 141 2204 TI 46/2008 1
19 1128 141 2204 Manifold 1
20 1117 141 1800 Sleeve 1
21 9771 021 2578 Hose clip Ø 34x5 1
22 1110 145 9001 Plug Fitment / change note → 1
23 1128 121 8600 Washer 1
24 1128 120 0625 Carburetor HD-15C → replaced by 1128 120 0622 TI 39/2003 1
25 1128 120 0622 Carburetor HD-17C 1
26 1128 121 7000 Baffle 1
27 9210 260 0700 Hexagon nut M5 2
28 1128 182 0700 Grommet 1
29 1128 123 7502 Grommet 1
40 1128 790 9908 Annular buffer 1
41 1125 790 9906 Annular buffer 1125/06 2
42 1128 120 0620 Carburetor HD-11A no longer available from factory 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · 044

044: modified housings add AV stop buffers

The modified crankcase and tank housing provide openings for additional AV stops.

1 41 628 724 — 044 AV stop/housing introduction; not the 046 cylinder-screw cutoff.

  • Crankcase 1128 020 2117 → 1128 020 2119 adds the opening for stop buffer 1125 791 2810 below the ignition module. Install the buffer from the side facing the tank housing.
  • Tank housing 1128 350 0815 → 1128 350 0813 adds the opening for plug 1110 145 9001, used as a stop buffer.
  • The supplied openings are part of this change; no drilling or universal buffer-only retrofit is established.
  • The summary lists crankcase item 1 including stop buffer item 2, and tank housing item 3 including plug item 4. These are historical supply descriptions, not guarantees of current package contents.
  • Remark 1 says the original 044 crankcase 1128 020 2117 and tank housing 1128 350 0815 were no longer available from the factory at the bulletin date.
  • The AV introduction also says annular buffers were modified, but gives no separate annular-buffer part number or dimensional change. Do not infer a buffer-only retrofit.

Source: TI 3/1999, p. 1 · TI 3/1999, p. 3 — Sections 1 and 3: AV openings and 044 summary.

Part numbers (6)
  • 1128 020 2117 — CrankcaseOriginal version · 044
  • 1128 020 2119 — CrankcaseModified AV version · 044 with stop-buffer opening
  • 1125 791 2810 — Stop bufferNew companion · 044 modified crankcase
  • 1128 350 0815 — Tank housingOriginal version · 044
  • 1128 350 0813 — Tank housingModified AV version · 044 with plug opening
  • 1110 145 9001 — Plug / stop bufferNew companion · 044 modified tank housing

Wrong number or missing part for the 044? Report a correction →