Stihl 1128 · Section Q · 16 of 16 · 44 parts
Conversion kit rescue saw not for USA (27.2000), (31.2005)
Fits 046.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (44)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 0000 140 4402 | Air filter HD2 | 1 |
| 2 | 1128 790 3614 | Wrap around handlebar | 1 |
| 3 | 9074 478 4675 | Pan head self-tapping screw IS-P6x32.5 Fitment / change note → | 2 |
| 4 | 1128 791 5501 | Elbow connector | 1 |
| 5 | 1128 791 5500 | Elbow connector Fitment / change note → → replaced by 1128 791 5501 TI 15/2007 | 1 |
| 6 | 9022 371 1020 | Spline screw IS-M5x20 Fitment / change note → → replaced by 9022 371 1050 TI 30/2004 | 1 |
| 7 | 9307 021 0120 | Washer 5.3 Fitment / change note → | 1 |
| 8 | 1128 891 8600 | Support | 1 |
| 9 | 1122 648 0403 | Chain sprocket cover | 1 |
| 10 | 1121 648 6610 | Bumper strip | 1 |
| 11 | 1122 656 1510 | Guard | 1 |
| 12 | 3003 655 9200 | Washer | 2 |
| 13 | 1128 664 2200 | Cover | 1 |
| 14 | 1128 664 0501 | Bumper spike | 1 |
| 15 | 9008 319 1020 | Hexagon head screw M5x20 | 2 |
| 16 | 9214 320 0700 | Lock nut M5 | 2 |
| 17 | 3003 656 3000 NLA | Cover Fitment / change note → | 1 |
| 18 | 9008 319 0960 | Hexagon head screw M5x12 Fitment / change note → | 2 |
| 19 | 9216 263 0700 | Hexagon nut M5 Fitment / change note → → replaced by 9220 260 0701 TI 25/1994 | 2 |
| 20 | 9309 021 0110 | Washer 5.3 Fitment / change note → | 1 |
| 21 | 3003 650 6501 | Depth limiter kit | 1 |
| 22 | 3003 650 6500 NLA | Depth limiter kit Fitment / change note → | 1 |
| 23 | 9570 601 1880 | Star grip screw M8x35-AL Fitment / change note → | 1 |
| 24 | 9308 021 0180 | Washer 8.4 Fitment / change note → | 1 |
| 25 | 9064 341 1860 | Countersunk screw M8x30 Fitment / change note → | 2 |
| 26 | 1128 145 3701 | Guard plate | 1 |
| 27 | 1128 148 1200 | Screw M6 | 1 |
| 28 | 9022 341 0960 | Spline screw IS-M5x12 → replaced by 9022 341 0980 TI 3/2006 | 1 |
| 29 | 9307 021 0120 | Washer 5.3 Fitment / change note → | 1 |
| 30 | 1128 195 3401 | Starter grip | 1 |
| 31 | 1113 195 8200 | Starter rope Ø 3.5x960 mm | 1 |
| 32 | 3003 002 9421 | Guide bar Fitment / change note → | 1 |
| 33 | 3944 000 0072 | 36RDR chain Rapid Duro R | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1128 007 1015 NLA | Conversion kit rescue saw 046/MS460 option | 1 |
| — | 1128 640 1709 NLA | Chain sprocket cover | 1 |
| — | 3944 660 6300 | Right hand cutter not illustratedoption | 1 |
| — | 3944 660 6500 | Left hand cutter not illustratedoption | 1 |
| — | 3725 662 1000 NLA | Drive link not illustratedoption | 1 |
| — | 3724 660 6600 | Tie strap with rivets not illustratedoption | 1 |
| — | 3994 662 3901 | Triple-hump tie strap, right-hand not illustratedoption | 1 |
| — | 3994 662 4001 | Triple-hump tie strap, left-hand not illustratedoption | 1 |
| — | 3949 007 1000 NLA | Cutter repair kit, r/h Fitment / change note → not illustratedoption | 1 |
| — | 3949 007 1001 NLA | Cutter repair kit, l/h Fitment / change note → not illustratedoption | 1 |
| — | 3949 007 1002 NLA | Drive link repair kit Fitment / change note → not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · 046
046: salvage conversion excludes catalytic versions
TI 27/2000 identifies different conversion kits for 044 and 046 and explicitly excludes the C catalytic variants.
- Kit 1128 007 1067 is the 046 kit. Models 044 C and 046 C with catalytic converters must not be converted under this bulletin: it cites hot-muffler ignition of chips as the reason.
- The 046 kit uses filter 0000 120 1654 and wrap-around handle 1128 790 3602; do not substitute the other model’s kit contents.
- The 046 kit is listed as items 1–15. Guide bar and chain are items 16 and 17, outside those listed kit contents.
- The TI refers to a separate detailed conversion/operation manual. This is a kit identity and exclusion record, not a complete conversion procedure or regional authorization. The later IPL sheet is marked not for USA.
- The complete shared hardware roster is summary items 3–15. Item 7 chain sprocket cover includes items 8, 9 and 10; item 12 depth limiter consists of items 13–15. These nested inclusion lists are not extra assembly quantities or a second kit.
- The two 5.3 washers are distinct: item 6 is 9307 021 0120 at the handle bracket; item 11 is 9309 021 0110 at the sprocket-cover mounting in exploded drawing 145TI053 SC. Do not collapse identical size labels into interchangeable parts.
- Guide bar 3003 002 9421 (item 16) and chain 3949 000 0072 (item 17) are listed separately from both kit contents. Their appearance in the exploded view does not make them included in either kit.
- The original exploded drawing 145TI053 SC distinguishes filter 1 from 18 and shared handle drawing label 2,19; this is not a claim that both filters or both model-specific handles fit one saw. The wrap-around handle is described as improving handling and control (147TI004 KN).
- All summary Remarks cells are blank; no quantities, fastener torques, production serial boundary or present-day availability are established. The footer reference to TI11/2000 is bibliography, not kit supersession.
Source: TI 27/2000, p. 3 · TI 27/2000, p. 4 — Complete section 2 summary, items 1–19 and exploded drawing 145TI053 SC; section 1.1.4 handle context.
Part numbers (18)
- 1128 007 1067 — Salvage conversion kitConditional historical kit · 046 non-catalytic version; separate instructions required
- 0000 120 1654 — HD air filter (summary item 1, 046 only)Model-specific kit component · 046 non-catalytic salvage conversion
- 1128 790 3602 — Wrap-around handle (summary item 2, 046 only)Model-specific kit component · 046 non-catalytic salvage conversion
- 9074 478 4675 — Spline screw IS P6 × 32.5Summary item 3; shared kit component · 046 non-catalytic salvage conversion; separate instructions required
- 1128 791 5500 — BracketSummary item 4; shared kit component · 046 non-catalytic salvage conversion; separate instructions required
- 9022 371 1020 — Spline screw IS M5 × 20Summary item 5; shared kit component · 046 non-catalytic salvage conversion; separate instructions required
- 9307 021 0120 — Washer 5.3Summary item 6; shared kit component · 046 non-catalytic salvage conversion; separate instructions required
- 1128 640 1702 — Chain sprocket cover including items 8–10Summary item 7; shared kit component · 046 non-catalytic salvage conversion; separate instructions required
- 3003 656 3000 — Additional coverSummary item 8; shared kit component · 046 non-catalytic salvage conversion; separate instructions required
- 9008 319 0960 — Hex head screw M5 × 12Summary item 9; shared kit component · 046 non-catalytic salvage conversion; separate instructions required
- 9216 263 0700 — Hex nut M5Summary item 10; shared kit component · 046 non-catalytic salvage conversion; separate instructions required
- 9309 021 0110 — Washer 5.3Summary item 11; shared kit component · 046 non-catalytic salvage conversion; separate instructions required
- 3003 650 6500 — Depth limiter consisting of items 13–15Summary item 12; shared kit component · 046 non-catalytic salvage conversion; separate instructions required
- 9570 601 1880 — Star knob screwSummary item 13; shared kit component · 046 non-catalytic salvage conversion; separate instructions required
- 9308 021 0180 — Washer 8.4Summary item 14; shared kit component · 046 non-catalytic salvage conversion; separate instructions required
- 9064 341 1860 — Countersunk screw M8 × 30Summary item 15; shared kit component · 046 non-catalytic salvage conversion; separate instructions required
- 3003 002 9421 — Guide barSummary item 16; outside listed kit contents · 046 non-catalytic salvage conversion; separate instructions required
- 3949 000 0072 — 36RDS Rapid Duro Super chainSummary item 17; outside listed kit contents · 046 non-catalytic salvage conversion; separate instructions required
Service note · 046
046 RHD: salvage cutting attachment and chain service
The 046 RHD has a special bar, carbide-tipped chain and depth limiter. TI27/2000 specifies sharpening settings and limits chain repairs to tie-strap rivets.
- Variant scope is the 046 RHD salvage saw in section 1, not every standard 046. The introduction describes trained rescue specialists cutting roof/cladding vent openings during fire-fighting, locating smoldering fires and cutting glass such as passenger-train windows; this is historical intended-use context, not a complete operating procedure.
- The five distinguishing features are carbide-tipped chain, cutting depth limiter with muffler guard, wrap-around handlebar, HD filter and chain sprocket cover with additional cover. The original photograph and later exploded view document the arrangement; no additional muffler-guard part number is supplied.
- The Rollomatic E-Super guide bar is 50 cm long and has three additional holes for mounting the depth limiter. This does not authorize drilling an ordinary guide bar; the TI supplies no hole dimensions or drilling procedure.
- Rapid Duro Super chain has an additional strap (1) supporting the cutter (2), strengthening the chain and enlarging the carbide-tip (3) seat in 147TI001 KN. These drawing labels are not the conversion-summary item numbers.
- Resharpen with the USG using a diamond wheel and the Rapid Duro settings: sharpening angle 25°, side plate angle 65°, depth gauge setting 0.65 mm. It is not possible to file the carbide tips. These values are specific to the described chain; no diamond-wheel part number or complete grinder setup is supplied.
- The saw chain can be repaired with NG 3, NG 4 and NG 5. Only the rivets of the tie straps can be broken and repaired. Replacement R/H cutter 3949 007 1000, L/H cutter 3949 007 1001 and drive link 3949 007 1002 are listed; this does not permit breaking the additional cutter-support strap or arbitrary rivets.
- The aluminium depth limiter mounts to the guide bar, weighs 1.1 kg and adjusts continuously from a few millimeters to about 20 cm. Drawing 147TI002 KN labels its large star knob adjusting screw (4), suitable for a gloved hand; that local label is not summary item 4 (the handle bracket).
- Drawing 147TI003 KN shows the limiter used as a rest during cutting. The TI describes reduced operator load, controlled feed and accurate cuts, and reduced risk of canting/snags; it does not claim risk elimination or a general cutting depth for an ordinary 046.
- Conversion/operation still depends on the separate detailed manual cited in section 2. The 044 C/046 C catalytic exclusion and the later IPL not-for-USA restriction remain in the model-specific kit records; neither is erased by this technical description.
Source: TI 27/2000, p. 1 · TI 27/2000, p. 2 · TI 27/2000, p. 3 · TI 27/2000, p. 4 — Complete sections 1–2: 046 RHD configuration, chain service, limiter, conversion summary and exploded drawing.
Part numbers (3)
- 3949 007 1000 — R/H cutterHistorical chain repair component · Rapid Duro Super chain described for 046 RHD; tie-strap rivet repair only
- 3949 007 1001 — L/H cutterHistorical chain repair component · Rapid Duro Super chain described for 046 RHD; tie-strap rivet repair only
- 3949 007 1002 — Drive linkHistorical chain repair component · Rapid Duro Super chain described for 046 RHD; tie-strap rivet repair only
Wrong number or missing part for the 046? Report a correction →