Stihl 1129 · Section C · 2 of 12 · 26 parts
Tank housing 020 T
Fits 020 T.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (26)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1129 350 0853 | Tank housing | 1 |
| 2 | 1129 351 3000 | Reflector foil | 1 |
| 3 | 1110 353 1600 | Valve | 1 |
| 4 | 1129 350 5850 | Tank vent | 1 |
| 5 | 1129 351 4000 | Insulating plate | 1 |
| 6 | 1129 352 5500 | Clamp | 1 |
| 7 | 9022 313 0680 | Spline screw IS-M4x16 | 4 |
| 8 | 0000 350 0525 | Filler cap | 1 |
| 9 | 9645 948 7734 | O-ring 25x3.5 | 1 |
| 10 | 1129 352 7700 | Bracket | 1 |
| 11 | 1129 352 5000 | Loop | 1 |
| 12 | 9074 478 4435 | Pan head self-tapping screw IS-P6x19 | 1 |
| 13 | 1129 353 6500 | Plug | 1 |
| 14 | 1129 967 3403 | Instruction label | 1 |
| 15 | 0000 967 3749 NLA | Warning pictogram Filler cap → replaced by 0000 967 3605 TI 19/2009 | 1 |
| 16 | 0000 967 3501 | Instruction label | 1 |
| 17 | 1129 358 7705 | Hose | 1 |
| 18 | 0000 930 2803 | Hose 3.1x5.7 mm x 1 m, R3 not illustratedoption | 1 |
| 19 | 0000 350 3504 | Pickup body | 1 |
| 20 | 0000 350 0520 | Filler cap → replaced by 1127 350 0500 TI 48/1995 | 1 |
| 21 | 0000 359 1220 | Sealing ring | 1 |
| 22 | 0000 350 0900 | Rope | 1 |
| 23 | 0000 353 0600 | Hook | 1 |
| 24 | 0000 967 3692 | Warning pictogram Filler cap | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | not sold separately | Hose 3.1x5.7x102 mm, R3 not available as a separate item | 1 |
| — | 1129 007 1050 | Set of gaskets | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 020 / 020 T
020/020 T tank housing: hose ordered separately
0800 to 0850 changes supply contents, not a hose supersession.
- Tank housing 1129 350 0800 has been replaced by 1129 350 0850. To permit ALL-ROUND USE FOR 020 T AND 020, hose 1129 358 7700 is NO LONGER INCLUDED and must be ORDERED SEPARATELY in future.
- The table includes item 2 wording must be read with the old hose number and the DASH in its new column: there is no new hose number and no claim that 0850 contains the hose. The original housing is NO LONGER AVAILABLE FROM FACTORY; the hose remains a separate item.
- Prose says the housing has been replaced, while the summary says introduction IN PROGRESS. Both source statements are retained; neither yields a precise cutoff. Do not apply X 36 503 801 from the filter section to this supply change.
- Historical 1997-20 evidence for 020, 020 T only; not later MS successors or unlisted variants. Source-era factory supply is not current stock. No reciprocal interchange or physical verification inferred. No hardware operation was performed.
Source: TI 20/1997, p. 2 — 020/020 T tank housing: hose ordered separately.
Part numbers (3)
- 1129 350 0800 — Original tank housingNo longer supplied by factory · 020, 020 T; 020/020 T tank housing: hose ordered separately; stated configuration only
- 1129 350 0850 — New common tank housingHose not included · 020, 020 T; 020/020 T tank housing: hose ordered separately; stated configuration only
- 1129 358 7700 — Hose, item 2Order separately; not superseded · 020, 020 T; 020/020 T tank housing: hose ordered separately; stated configuration only
Conditional replacement · 020 T
020 T: pickup hose 7700 replaced by 7702
The new pickup hose replaces the previous 7700 version; the introduction is in progress, with no serial cutoff.
- Section 1 and summary item 1 replace pickup hose 1129 358 7700 with 1129 358 7702 on the 020 T. Figure 142TI013 KN identifies the previous hose on the left and the new hose on the right; their differently drawn upper end profiles are identification context, not measured dimensions or an instruction to modify either hose.
- The modification is marked in progress. Remark 1 says the previous version is no longer available from the factory. The TI supplies no numeric serial boundary, installation instructions or assertion that the old version is interchangeable in both directions.
- The retained 01-2012 tank-housing 020 T sheet C instead lists hose 1129 358 7705 at position 17. Neither 7700 nor 7702 appears as a numbered row on that sheet. This review does not invent a 7702-to-7705 supersession, backdate the later number or attach the historical numbers to position 17; the original IPL remains unchanged.
- The retained TI17/1999 USA originals name Model 020 T, series 1129, and contain only tank-housing pickup hose and crankcase-cover sections. The extracted title mentioning a compensator carburetor and the catalog C1Q-S16A sheet labeled (17.1999) do not establish a carburetor change in these retained pages. Do not extend this evidence to rear-handle 020, earlier series 1114, MS 200 T/MS 200 or MC 200. Factory supply statements are historical, not current availability; no physical interchange has been tested.
Source: TI 17/1999, p. 1 · TI 17/1999, p. 2 — Both original USA pages: full sections 1 and 2, figure 142TI013 KN, both summary tables, introduction lines, remarks and bibliography.
Part numbers (2)
- 1129 358 7700 — Previous pickup hose; summary item 1Replaced; previous factory supply ended · 020 T; TI17/1999 USA
- 1129 358 7702 — New pickup hose; summary item 1New version; introduction in progress · 020 T; TI17/1999 USA
Wrong number or missing part for the 020 T? Report a correction →