Stihl 4228 · Section G · 7 of 10 · 31 parts
Carburetor C1Q-S54A
Fits HS 45.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (31)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4226 120 7100 | Throttle shaft with lever | 1 |
| 2 | 1123 122 3000 | Spring | 1 |
| 3 | 4228 121 3301 NLA | Throttle shutter | 1 |
| 4 | 1125 122 7403 | Round head screw | 1 |
| 5 | 1125 122 9001 | E-clip | 1 |
| 6 | 4128 121 8901 | Pin | 1 |
| 7 | 1120 122 9000 | E-clip | 1 |
| 8 | 1129 121 4800 | Pump diaphragm | 1 |
| 9 | 1123 129 0905 | Gasket | 1 |
| 10 | 4128 121 0800 | End cover → replaced by 1130 121 0801 TI 31/2009 | 1 |
| 11 | 1120 122 7800 | Oval head screw | 1 |
| 12 | 4116 121 5100 | Inlet needle | 1 |
| 13 | 1120 122 3004 | Spring | 1 |
| 14 | 1125 121 5000 | Inlet control lever | 1 |
| 15 | 1120 121 9200 | Spindle | 1 |
| 16 | 1120 122 6600 | Collar screw | 1 |
| 17 | 1129 129 0900 | Gasket Fitment / change note → → replaced by 4134 121 4700 TI 16/2009 | 1 |
| 18 | 4129 121 4700 | Metering diaphragm Fitment / change note → | 1 |
| 19 | 4140 120 2200 | Flange Fitment / change note → | 1 |
| 20 | 4226 122 7100 | Screw Fitment / change note → | 4 |
| 21 | 4140 122 6300 NLA | Idle speed adjustment screw | 1 |
| 22 | 1123 121 7800 | Strainer | 1 |
| 23 | 4137 122 5100 | Outlet valve | 1 |
| 24 | 4119 121 0700 | Cup plug | 1 |
| 25 | 4140 121 0800 | End cover Fitment / change note → | 1 |
| 26 | 4226 121 2700 | Cap | 1 |
| 27 | 4129 121 0700 | Cup plug | 1 |
| 28 | 4228 121 5600 NLA | Fixed jet 0.43 | 1 |
| 29 | 4137 121 8600 | Washer | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4228 120 0601 | Carburetor C1Q-S54A Fitment / change note → | 1 |
| — | 1129 007 1062 | Set of carburetor parts → replaced by 4128 007 1060, 4128 007 1060 TI 6/2009 | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · HS 45
HS 45 LD carburetor: paired flange and end cover
C1Q-S54 replaces C1Q-S49B; old-carburetor repairs require the complete paired flange conversion.
- C1Q-S49B 4228 120 0600 is deleted and replaced by C1Q-S54 4228 120 0601. These are LD/BIS carburetors, not the later H/L/LA C1Q-S67. The retained IPL calls the 0601 sheet C1Q-S54A; the 2001 source says C1Q-S54. The suffix is not silently changed.
- New end cover 4140 121 0800 and flange 4140 120 2200 can only be used together. Four identical 4226 122 7100 screws secure the combined assembly instead of two short and two long screws; their quantity changes from two to four.
- For repairs to old carburetor 4228 120 0600 use flange kit 4140 120 2250, including new flange, end cover, gasket, metering diaphragm, four screws and illustrated instructions. New flange and end cover are separately available for the new carburetor only. The diagram shows old separate cover/flange fasteners versus the new combined stack.
- Previous end cover 4226 121 0800, two screws 1128 122 7100, flange 4226 120 2200 and gasket 1129 129 0900 remain available for other models, not a license to mix the new pair. Metering diaphragm 4129 121 4700 is unchanged. The new gasket is printed 4129 129 0902; do not replace this historical number with the later IPL gasket by assumption.
- The exact illustrated instructions for kit 4140 120 2250 are a documented retained-corpus source gap: the bounded inventory in docs/ti16-2001-dependencies.json did not locate them. This TI independently supplies the HS 45 applicability and kit roster but does not reproduce that separate sheet.
- HS 45 only. Factory availability describes the 2001 bulletin, not present stock. No physical interchange or running adjustment was tested.
Source: TI 26/2001, p. 2 · TI 26/2001, p. 3 — Section 3, exploded views, all summary rows and remarks.
Part numbers (12)
- 4228 120 0600 — Carburetor C1Q-S49BPrevious LD carburetor · HS 45; configuration restrictions in this note
- 4228 120 0601 — Carburetor C1Q-S54New LD carburetor · HS 45; configuration restrictions in this note
- 4226 122 7100 — ScrewQuantity two to four · HS 45; configuration restrictions in this note
- 4226 121 0800 — End coverPrevious · HS 45; configuration restrictions in this note
- 4140 121 0800 — End coverNew; matched flange required · HS 45; configuration restrictions in this note
- 1128 122 7100 — ScrewPrevious pair · HS 45; configuration restrictions in this note
- 4226 120 2200 — FlangePrevious · HS 45; configuration restrictions in this note
- 4140 120 2200 — FlangeNew; matched cover required · HS 45; configuration restrictions in this note
- 4129 121 4700 — Metering diaphragmUnchanged · HS 45; configuration restrictions in this note
- 1129 129 0900 — GasketPrevious · HS 45; configuration restrictions in this note
- 4129 129 0902 — GasketNew as printed · HS 45; configuration restrictions in this note
- 4140 120 2250 — Flange conversion kitOld-carburetor repair kit · HS 45; configuration restrictions in this note
Wrong number or missing part for the HS 45? Report a correction →