Cut-off machines · part-number series 4224

TS 700

15 exploded views, 484 part numbers.

Factory tuning settings

Idle speed	2,200 rpm
Max speed	9,800 rpm
L screw (low speed)	3/4 turn
H screw (high speed)	3/4 turn
LA screw (idle stop)	1/4 (1/2) turns
Confidence	sourced

Screw figures are turns open from lightly seated. Set the final mixture by ear and tachometer against the machine in front of you — running a two-stroke lean to hit a published number is how pistons get scored.

A Crankcase 23
B Cylinder, Muffler 37
C Belt tensioner, Clutch 35
D Rewind starter 21
E Tank housing 50
F Ignition system 16
G Carburetor WJ-114A 52
H Carburetor HS-314A (43.2007), (21.2011) 46
J Air filter, Shroud 33
K Support with guard with water attachment 57
L Support with guard with water attachment (43.2007) 59
M Pressurized water tank 14
N Pressurized water tank (28.2010) 17
O Tools, Extras 14
P Wheel kit 10

Others on part-number series 4224

These share the powerhead, so a sheet you cannot find here may be filed under one of them. That does not make every part interchangeable — check yours.

· FW 20 8
· TS 800 14

Parts are not interchangeable across series — check yours before ordering.