Stihl 1122 · Section L · 11 of 14 · 33 parts
Handlebar (Heating)
Fits 064.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (33)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1122 790 1713 | Handlebar | 1 |
| 2 | 1124 442 0400 NLA | Insulating hose 160 mm / 6.3'' | 1 |
| 3 | 1118 431 6700 NLA | Terminal socket no longer available from factory | 1 |
| 4 | 0000 442 7000 NLA | Contact sleeve no longer available from factory | 1 |
| 5 | 9074 478 4475 | Pan head self-tapping screw IS-P6x21.5 | 2 |
| 6 | 9074 478 4435 | Pan head self-tapping screw IS-P6x19 | 2 |
| 7 | 1122 790 3604 | Wrap around handlebar → replaced by 1122 790 3607 TI 2/1996 | 1 |
| 8 | 1121 442 0403 | Insulating hose 130 mm / 5.1'' | 1 |
| 9 | 1122 791 5500 | Elbow connector → replaced by 1122 790 3610, 1122 791 5501 TI 10/2008 | 1 |
| 10 | 9307 021 0120 | Washer 5.3 | 1 |
| 11 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 1 |
| 12 | 9074 478 4675 | Pan head self-tapping screw IS-P6x32.5 | 1 |
| 13 | 9074 478 4435 | Pan head self-tapping screw IS-P6x19 | 4 |
| 14 | 1122 351 0901 | Guard | 1 |
| 15 | 9074 478 2970 | Pan head self-tapping screw IS-P4x10 | 1 |
| 16 | 0000 989 0808 | Grommet | 1 |
| 17 | 0000 989 0813 NLA | Grommet | 1 |
| 18 | 1121 442 0406 NLA | Insulating hose 40 mm / 1.6'' | 1 |
| 19 | 1110 432 9200 | Grommet | 1 |
| 20 | 1110 430 0202 | Stop switch | 1 |
| 21 | 1122 431 2700 NLA | Twin connector tag | 1 |
| 22 | 0000 961 1406 NLA | Ring | 1 |
| 23 | 0000 958 1406 NLA | Washer | 1 |
| 24 | 1118 432 2200 NLA | Hexagon nut M12 | 1 |
| 26 | 0751 030 8953 NLA | Terminal socket 4.8-1 no longer available from factory | 2 |
| 27 | 1121 791 9000 NLA | Clamp | 1 |
| 28 | 1128 434 5000 NLA | Heating element | 1 |
| 29 | 1118 431 6600 NLA | Terminal pin no longer available from factory | 1 |
| 30 | 1121 442 0402 NLA | Insulating hose 35 mm / 1.4'' Fitment / change note → | 2 |
| 31 | 1122 790 1712 | Handlebar Fitment / change note → → replaced by 1122 790 1713 TI 2/1996 | 1 |
| 32 | 1124 791 5105 | Stiffener | 1 |
| 33 | 9074 478 4675 | Pan head self-tapping screw IS-P6x32.5 | 2 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1122 790 1752 | Handlebar | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 064
064: standard and heated front-handle replacements
Standardization with 066 does not merge the standard and heated variants or their part numbers.
X 30 638 522 — 064 standard/heated front-handle modification only.
- From X 30 638 522, standard front handle 1122 790 1700 becomes 1122 790 1702; heated front handle 1122 790 1710 becomes 1122 790 1712. Each new row has MOQ 1. Heated and standard versions remain distinct; do not assign the heated handle to the standard configuration.
- The purpose is standardizing 064 parts with 066, but this is a 064 changeover, NOT a new 066 serial cutoff or proof that standard/heated versions can be substituted. Original versions remain supplied only while existing factory stocks last. No machining, wiring-conversion procedure or tightening torque is printed.
- Historical TI 45/1994 guidance, not current stock, universal compatibility or physical verification. No hardware operation was performed.
Source: TI 45/1994, p. 2 — standard and heated front-handle replacements.
Part numbers (4)
- 1122 790 1700 — Original standard front handlewhile stocks last · 064 only in the version/configuration described here
- 1122 790 1702 — New standard front handleMOQ 1 · 064 only in the version/configuration described here
- 1122 790 1710 — Original heated front handlewhile stocks last · 064 only in the version/configuration described here
- 1122 790 1712 — New heated front handleMOQ 1 · 064 only in the version/configuration described here
Service note · 064 / 066
064 / 066 heated handles: tube replaces two connector housings
Insulation change at harness/generator plug-and-socket connection; no terminal or wiring redesign inferred.
- Only machines WITH HANDLE HEATING are described. Tube1121 442 0402, printed3.3x0.9x35, insulates the plug-and-socket connection between wiring harness and generator. It replaces BOTH pin housing1128 431 8400 and socket housing1128 431 8700.
- Table deletes both housing entries and adds the tube; it does not delete the electrical pins/sockets or authorize cutting/splicing conductors. No tube material, shrink process, dimension interpretation, wiring colours or electrical test values are supplied.
- Introduction is IN PROGRESS; no exact serial. Original housings remain factory supplied ONLY WHILE EXISTING STOCKS LAST. This differs from the old guard being no longer supplied; do not merge those supply remarks.
- Historical TI08/1997 evidence for the stated 064/066 configurations only. Independent modification cutoffs are not whole-model identification ranges, current stock claims or blanket retrofit permission. No MS640/MS660 successor scope or tested physical interchange is inferred. No hardware operation was performed.
Source: TI 8/1997, p. 4 — 064 / 066 heated handles: tube replaces two connector housings.
Part numbers (3)
- 1128 431 8400 — Pin housingOriginal; stocks only · 064 / 066; only the described configuration
- 1128 431 8700 — Socket housingOriginal; stocks only · 064 / 066; only the described configuration
- 1121 442 0402 — Insulating tube3.3x0.9x35New replacement for both housings · 064 / 066; only the described configuration
Wrong number or missing part for the 064? Report a correction →