Stihl 1127 · Section E · 5 of 12 · 38 parts
Chain brake
Fits 029, 039.
Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.
Parts (38)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1127 792 9100 | Hand guard | 1 |
| 2 | 1128 160 5000 | Lever | 1 |
| 3 | 1121 162 5010 | Lever | 1 |
| 4 | 0000 997 0628 | Spring | 1 |
| 5 | 0000 958 0521 | Washer | 1 |
| 6 | 1127 162 5800 | Strap | 1 |
| 7 | 9460 624 0400 | E-clip 4 | 2 |
| 8 | 1125 160 5400 | Brake band | 1 |
| 9 | 1127 021 1102 NLA | Cover Fitment / change note → | 1 |
| 10 | not sold separately | Tension spring not available as a separate item | 1 |
| 11 | 1125 162 8002 | Hose 20 mm / 13/16'' | 1 |
| 12 | 9075 478 3015 | Pan head self-tapping screw IS-D4x15 | 2 |
| 13 | 1119 656 7705 | Chain catcher → replaced by 1125 650 7700 TI 10/2002 | 1 |
| 14 | 9075 478 4115 | Pan head self-tapping screw IS-D5x16 | 1 |
| 15 | 1125 640 1701 | Chain sprocket cover → replaced by 1122 640 1702, 1128 640 1706 TI 36/2000 | 1 |
| 16 | 1121 648 6610 | Bumper strip | 4 |
| 17 | 1125 656 1501 | Guard | 1 |
| 18 | 0000 955 0801 | Hexagon nut M8 | 2 |
| 19 | 1127 148 1200 | Screw | 1 |
| 20 | 1127 149 0650 | Muffler gasket Fitment / change note → | 1 |
| 21 | 9331 630 0120 | Conical spring washer 5 Fitment / change note → | 3 |
| 22 | 1127 140 0601 | Muffler | 1 |
| 23 | 1127 140 0605 | Muffler | 1 |
| 24 | 1127 140 0606 | Muffler | 1 |
| 25 | 1127 140 0605 | Muffler | 1 |
| 26 | 1127 141 9000 | Screen Fitment / change note → | 1 |
| 27 | 1127 145 1606 | Cover Fitment / change note → | 1 |
| 28 | 1127 145 1601 | Cover | 1 |
| 29 | 9216 263 0700 | Hexagon nut M5 Fitment / change note → → replaced by 9220 260 0701 TI 25/1994 | 3 |
| 30 | 1127 149 0601 | Muffler gasket Fitment / change note → | 1 |
| 31 | 1128 664 0500 | Bumper spike option | 1 |
| 32 | 1127 664 0500 | Bumper spike | 1 |
| 33 | 9075 478 4115 | Pan head self-tapping screw IS-D5x16 option | 2 |
| 34 | 1127 791 7200 | Sleeve | 1 |
| 34 | 1118 791 7205 | Sleeve | 1 |
| 35 | 0000 967 3630 | Instruction label | 1 |
| 36 | 0000 967 3612 | Instruction label | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1127 160 5550 | Tension spring with cover Fitment / change note → | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 029 / 039
029 / 039: muffler gasket and conical washer orientation
New gasket is supplied with three conical spring washers; muffler introduction remains in progress.
- Original exhaust gasket1127 149 0600 is0.75mm (0.03in) thick; replacement is1mm (0.04in) sheet metal with improved setting properties claimed by the source. Replacement pack1127 149 0650 includes the new gasket AND THREE conical spring washers9331 630 0120; the new gasket alone has no separately available part number in this table.
- Correct conical spring washer orientation is mandatory (drawing139TI005). In the original side-section the washer’s inner rim bears toward the flange nut (left) and its outer rim toward the muffler (right): concave/open side toward the muffler. Preserve the source drawing as orientation authority; the drawing is not three washers stacked on a single fastener. No tightening torque, conical angle or re-use criterion is given.
- The original gasket is supplied only while stocks last. Pack1127 149 0650 MOQ10; separate washer9331 630 0120 MOQ1. Pack MOQ10 is NOT ten gaskets installed and does not change the THREE washers supplied with one replacement gasket.
- Muffler mounting also changes to higher-strength flange locknuts V M5-10,9216 263 0700,MOQ10,from V M5-8,9216 261 0700. Original locknuts remain available for OTHER MODELS. Keep strength-class designations distinct; do not interpret8/10 as quantities or substitute the old nut based solely on M5 thread.
- Modification introduction is “in progress”, not the wiring serial X30 222 572. No precise muffler serial boundary is supplied. Footer refers to prior TI33.92; Waiblingen November23,1994,D1/MTK-sc,Technical Documentation are provenance, not serial or production limits.
- Historical TI 39/1994 guidance, not current stock or physical verification. Exact-model IPL links do not extend these instructions to MS successors. No hardware operation was performed.
Source: TI 39/1994, p. 5 — muffler gasket and conical washer orientation.
Part numbers (5)
- 1127 149 0600 — Original0.75mm exhaust gasketWhile stocks last · 029 / 039, subject to configuration and repair restrictions in this note
- 1127 149 0650 — 1mm exhaust gasket with three spring washersReplacement pack; MOQ10 · 029 / 039, subject to configuration and repair restrictions in this note
- 9331 630 0120 — Conical spring washerCompanion part; MOQ1 · 029 / 039, subject to configuration and repair restrictions in this note
- 9216 261 0700 — Original flange locknut V M5-8Other-model availability · 029 / 039, subject to configuration and repair restrictions in this note
- 9216 263 0700 — New flange locknut V M5-10Higher-strength replacement; MOQ10 · 029 / 039, subject to configuration and repair restrictions in this note
Service note · 029 / 039
029 / 039 chain brake: stronger spring requires modified cover
Matched spring-and-cover kit; separate spring supply restriction ends at the end of 1997.
X 31 934 653 — 029 / 039 chain-brake spring and cover only; not the pickup or oil-pump introduction.
- From X 31 934 653 a higher-strength brake spring with SLIGHTLY LARGER DIAMETER is introduced with cover 1127 021 1102 replacing 1127 021 1100. Figure 139TI 008K identifies the new cover by its molded number; no spring force, diameter measurement or braking performance figure is supplied.
- The strengthened spring MAY ONLY BE INSTALLED TOGETHER WITH THE NEW COVER 1127 021 1102. Kit 1127 160 5550 contains spring (summary key 1) and cover(key 2), MOQ 1. The new spring has NO SEPARATE ORDERING NUMBER in the TI; the printed -*- is a non-orderable marker, not the old spring number.
- The new spring is supplied only with the new cover UP TO THE END OF 1997; remark 2 repeats the separate-item restriction for that period. This time limit does NOT expire the matched-cover installation requirement, nor prove separate availability after 1997.
- Old spring 1121 160 5500 and old cover 1127 021 1100 remain available FOR OTHER MODELS (remark 1); those models are not identified here. New cover MOQ 5 is not five covers per saw. All other parts as before.
- Later 029/039 E sheet lists kit 1127 160 5550, cover 1127 021 1102 at key 9 (NLA flag) and an unnumbered tension spring at key 10. Later availability flags do not rewrite 1995 supply claims or assign a new standalone spring number.
- Historical TI guidance for the named models and stated versions only. Shared IPL sheets or series do not extend applicability to other variants or successor models. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.
Source: TI 25/1995, p. 1 — Section1, figure139TI008K, summary and remarks.
Part numbers (4)
- 1127 160 5550 — Brake spring with coverkit; includes summary items 1 and 2; MOQ 1 · 029 / 039; Section 1, figure 139TI 008K, summary and remarks
- 1121 160 5500 — Original brake springretained supply for unnamed other models · 029 / 039; Section 1, figure 139TI 008K, summary and remarks
- 1127 021 1100 — Original coverretained supply for unnamed other models · 029 / 039; Section 1, figure 139TI 008K, summary and remarks
- 1127 021 1102 — Modified coverrequired with strengthened spring; MOQ 5 · 029 / 039; Section 1, figure 139TI 008K, summary and remarks
Conditional replacement · 029 / 039
029 / 039: gunmetal EPA muffler has a smaller outlet
Muffler and finish changes retain the same screen; older aluminized parts remain spares.
- Historical TI46/1997 guidance for the named 029/039 configurations only, not MS successors or every shared-sheet variant. No hardware operation was performed.
- New muffler 1127 140 0621 has a smaller exhaust opening and gunmetal finish, replacing aluminized 1127 140 0620. Cover 1127 145 1606 replaces aluminized 1127 145 1605; covers are otherwise the same.
- New EPA muffler assembly includes cover item 4 and screen item 5. Screen 1127 141 9000 is unchanged. Do not describe the entire muffler as a finish-only change.
- Old aluminized muffler and cover remain available as spares for older machines. Introduction in progress with no serial cutoff. Historical availability is not current stock; the separate insulation-gasket instruction is ONLY039.
Source: TI 46/1997, p. 8 — Section 4 muffler/cover and summary rows 1–5.
Part numbers (5)
- 1127 140 0620 — Original aluminized mufflerOriginal or new as stated · 029/039; configuration-specific historical change
- 1127 140 0621 — New EPA gunmetal mufflerOriginal or new as stated · 029/039; configuration-specific historical change
- 1127 145 1605 — Original aluminized coverOriginal or new as stated · 029/039; configuration-specific historical change
- 1127 145 1606 — Gunmetal coverOriginal or new as stated · 029/039; configuration-specific historical change
- 1127 141 9000 — Unchanged screenOriginal or new as stated · 029/039; configuration-specific historical change
Historical fitment · 039
039 EPA: insulation gasket goes on the cylinder side
1127 149 0601 is between cylinder and exhaust gasket, not a 029 instruction.
- Historical TI46/1997 guidance for the named 029/039 configurations only, not MS successors or every shared-sheet variant. No hardware operation was performed.
- Additional thermal-insulation gasket 1127 149 0601 is installed BETWEEN THE CYLINDER AND EXHAUST GASKET. The illustration explicitly captions 039 EPA and shows the gasket position; the cover also restricts this insulation change to 039.
- No 029 applicability or gasket torque is supplied here. Introduction in progress. Last-TI48.95 footer is a bibliographic pointer, not an added fitment assertion.
Source: TI 46/1997, p. 8 — Section 4 Model 039 paragraph, installation drawing and row 6.
Part numbers (1)
- 1127 149 0601 — Thermal-insulation gasketAdditional gasket · 039 EPA only; cylinder side of exhaust gasket
Wrong number or missing part for the 029, 039? Report a correction →