Stihl engine series 1133 · FR
MS 270 · MS 280
Chain size for this family: .325″ / 3/8″, 3003-mount bar. Typical STIHL drive-link counts for .325" chain: 16″ = 67, 18″ = 74, 20″ = 81. Count the links on your old chain or read the bar stamp before ordering.
Chains & bars that fit the MS 270 · MS 280
Pitch & gauge .325″ / 3/8″ · recommended bar 16–20″ · bar mount 3003 / D025 · round file 3/16" (4.8 mm)
Chain & bar by length
| Bar | Drive links | Shop |
|---|---|---|
| 16″ | 67 DL | Chain → Bar · 3003 → |
| 18″ | 74 DL | Chain → Bar · 3003 → |
| 20″ | 81 DL | Chain → Bar · 3003 → |
Drive-link counts come from STIHL's saw-chain selection chart and depend on the bar mount as well as length. Pick the chain link that matches the gauge stamped on your bar. Bar searches include mount 3003 / D025; still confirm the mount stamp, pitch, gauge and drive-link count on your installed bar before ordering.
Drive-link counts: STIHL 2025 US catalog, saw chain selection, pp. 166-167; Oregon chain fit guide, STIHL section. Checked Nov 2026. How we check fitment
Files, oil & sharpening
Suggested match: Oregon 95VPX or 20LPX (.050″) · 21LPX (.058″) · 22LPX (.063″). Match the gauge and confirm the drive-link count for your exact bar before ordering. These are equivalent aftermarket (Oregon) chains, not genuine STIHL chain — STIHL sells its own chain through its dealer network, and we're not affiliated with STIHL. New to fitment? See the bar-mount identification guide and chain & cutter guide.
Some links earn us a commission. It never changes the specs or what we recommend.
Factory tuning settings
| Idle speed | 2,800 rpm |
| Max speed | 13,500 rpm |
| L screw (low speed) | 1/4 turn |
| H screw (high speed) | 3/4 turn |
| Confidence | sourced |
Screw figures are turns open from lightly seated. These are the figures every model in this family shares; an individual model page may be more specific. Set the final mixture by ear and tachometer against the machine in front of you — running a two-stroke lean to hit a published number is how pistons get scored.
Models in this family (2)
392 part numbers across 18 exploded views — the Diagrams column goes straight to them.
| Model | Years | Market | Rarity | Diagrams | Notes |
|---|---|---|---|---|---|
| MS 270 50 cc | 2002–10 | EU/Global | Common (EU) | 18 | 50.0 cc |
| MS 280 54.7 cc | 2002–10 | EU/Global | Common (EU) | 18 | 54.7 cc; larger sibling |
Service bulletins (10)
Running changes and fixes STIHL published for this engine family.
- TI 57/2006 Flywheel, rope rotor; Fan cover with rewind starter; Summary
- TI 49/2006 Intelligent Engine Management; Diagnosis; Servicing; Summary; Special tool
- TI 21/2006 Flywheel, rope rotor; Fan cover with rewind starter; Summary
- TI 64/2005 Clutch, clutch shoes; Summary
- TI 35/2005 Manifold; Crankshaft / flywheel: tightening torque
- TI 21/2005 Limiter cap; Segment; Spare parts; Removal of the limiter caps; Summary
- TI 18/2004 Crankshaft
- TI 35/2003 Muffler
- TI 28/2003 Tank vent with O-ring
- TI 26/2002 New chainsaws STIHL MS 270 and MS 280
Data confidence
Verify anything tagged estimated or approx against STIHL spec sheets.
Chain, bar and mount: family research from STIHL product pages, parts catalogues and collector records. Checked Jul 2026. How we check fitment
Something here wrong or missing for the MS 270 · MS 280? Report a correction →