Cut-off machines · part-number series 4224

TS 700 · FW 20 · TS 800

37 exploded views, 1,186 part numbers.

TS 700

Factory tuning settings

Idle speed	2,200 rpm
Max speed	9,800 rpm
L screw (low speed)	3/4 turn
H screw (high speed)	3/4 turn
LA screw (idle stop)	1/4 (1/2) turns
Confidence	sourced

Screw figures are turns open from lightly seated. Set the final mixture by ear and tachometer against the machine in front of you — running a two-stroke lean to hit a published number is how pistons get scored.

A Crankcase 23
B Cylinder, Muffler 37
C Belt tensioner, Clutch 35
D Rewind starter 21
E Tank housing 50
F Ignition system 16
G Carburetor WJ-114A 52
H Carburetor HS-314A (43.2007), (21.2011) 46
J Air filter, Shroud 33
K Support with guard with water attachment 57
L Support with guard with water attachment (43.2007) 59
M Pressurized water tank 14
N Pressurized water tank (28.2010) 17
O Tools, Extras 14
P Wheel kit 10

FW 20

A Frame 39
B Support, Throttle control TS 400 39
C Support, Throttle control TS 410, 420 43
D Support, Throttle control TS 500i 46
E Support, Throttle control TS 700, 800 38
F Depth of cut setting 27
G Guide wheel kit 15
J Water tank 23

TS 800

Factory tuning settings

Idle speed	2,200 rpm
Max speed	9,800 rpm
LA screw (idle stop)	1/4 (1/2) turns
Confidence	sourced

A Crankcase 23
B Cylinder, Muffler 37
C Belt tensioner, Clutch 35
D Rewind starter 21
E Tank housing 47
F Ignition system 14
G Carburetor WJ-114A 51
H Carburetor HS-314A (43.2007), (21.2011) 46
J Air filter, Shroud 33
K Support with guard with water attachment 70
L Pressurized water tank 14
M Pressurized water tank (28.2010) 17
N Tools, Extras 14
O Wheel kit 10

Parts are not interchangeable across series — check yours before ordering.