Stihl model · engine series 1130
017 30.1 cc
30.1 cc → MS 170
The production, market and rarity details above are specific to the 017 roster record. The displacement below is specific to this roster record. The chain, bar and mount are the published family fitment for engine series 1130; confirm the pitch, gauge and drive-link count stamped on your installed bar before ordering.
Model & family fitment specs
Chains & bars that fit the 017
Pitch & gauge 3/8″ Picco · .043–.050″ · recommended bar 12–16″ · bar mount 3005 / A074 · round file 5/32" (4.0 mm)
Chain & bar by length
| Bar | Drive links | Shop |
|---|---|---|
| 12″ | 44 DL | Chain → Bar · 3005 → |
| 14″ | 50 DL | Chain → Bar · 3005 → |
| 16″ | 55 DL | Chain → Bar · 3005 → |
Drive-link counts come from STIHL's saw-chain catalog. Bar searches include mount 3005 / A074; still confirm the mount stamp, pitch, gauge and drive-link count on your installed bar before ordering.
Files, oil & sharpening
Suggested match: Oregon 90/91-series (e.g. 91PX). Confirm the drive-link count for your exact bar length before ordering. These are equivalent aftermarket (Oregon) chains, not genuine STIHL chain — STIHL sells its own chain through its dealer network, and we're not affiliated with STIHL. New to fitment? See the bar-mount identification guide and chain & cutter guide.
Some links earn us a commission. It never changes the specs or what we recommend.
Reference service specs
Reference-only service facts. STIHL revised parts by serial number, market, and production revision; verify against the saw label, IPL, or dealer parts lookup before ordering.
| Spark plug | Bosch WSR 6 F · NGK BPMR 7 A |
| Fuel filter | 0000 350 3500 |
| Air filter | 1130 124 0800 · 1130 124 0801 HD |
| Starter rope | 3 mm · 31.5–36″ |
| Guide coverage | 017 · 018 · MS 170 · MS 180 |
| Source | 2019 STIHL Technical Reference Guide · sourced |
- Guide lists 30.1 cc for 017/MS 170 and 31.8 cc for 018/MS 180.
Factory tuning settings
| Idle speed | 2,800 rpm |
| L screw (low speed) | 2 (LD-SCHRAUBE) turns |
| LA screw (idle stop) | 1/2 turn |
| Confidence | sourced |
Screw figures are turns open from lightly seated. These are the figures every model in this family shares; an individual model page may be more specific. Set the final mixture by ear and tachometer against the machine in front of you — running a two-stroke lean to hit a published number is how pistons get scored.
Parts diagrams (10)
290 part numbers. The catalogue files these under the 017, one bill of material covering this model.
Related models in series 1130
Data confidence
Chain, bar, mount and displacement confidence comes from the shared 017/018 · MS 170/180 family research.
Something wrong or missing for the 017? Report a correction →