← The rest of the catalogue Edgers · part-number series 4140
Edgers · series 4140
121 exploded views, 2,847 part numbers.
Factory tuning settings
| Idle speed | 2,800 rpm |
| Confidence | sourced |
Set the final mixture by ear and tachometer against the machine in front of you — running
a two-stroke lean to hit a published number is how pistons get scored.
- · AC Tools, Extras 23
- · AB Gear head 20
- · AA Deflector 20
- A Crankcase, Cylinder 24
- B Crankcase, Cylinder 2-MIX 18
- C Rewind starter 18
- D Rewind starter ErgoStart/Easy2Start 17
- E Muffler 11
- F Muffler Cat. 18
- G Ignition system, Clutch 14
- H Engine housing (Loop handle) 17
- J Engine housing (Loop handle) USA, CDN, AUS 22
- K Engine housing (Bike handle) 10
- L Air filter, Spacer flange 28
- M Air filter, Spacer flange 2-MIX 16
- N Fuel tank 14
- O Carburetor C1Q-S186A, C1Q-S153, C1Q-S97A 43
- P Carburetor C1Q-S187A, C1Q-S160, C1Q-S143 BR 43
- Q Carburetor C1Q-S216, C1Q-S190B 2-MIX 29
- R Carburetor C1Q-S71 (25.2004) 36
- S Carburetor C1Q-S66 (36.2002) 37
- T Carburetor C1Q-S58A (27.2001) 31
- U Carburetor C1Q-S53A 31
- V Carburetor C1Q-S44A 31
- W Drive tube assembly FS 55, Loop handle 19
- X Drive tube assembly FS 55 T (14.2002) 26
- Y Bike handle 26
- Z Bike handle (27.2001) 25
Factory tuning settings
| Idle speed | 2,800 rpm |
| Max speed | 9,500 rpm |
| H screw (high speed) | 3/4 turn |
| Confidence | sourced |
Screw figures are turns open from lightly seated.
Set the final mixture by ear and tachometer against the machine in front of you — running
a two-stroke lean to hit a published number is how pistons get scored.
Factory tuning settings
| Idle speed | 2,800 rpm |
| Confidence | sourced |
Set the final mixture by ear and tachometer against the machine in front of you — running
a two-stroke lean to hit a published number is how pistons get scored.
- A Crankcase, Cylinder 25
- B Crankcase, Cylinder 2-MIX 18
- C Rewind starter 18
- D Rewind starter ErgoStart/Easy2Start 17
- E Muffler 14
- F Muffler Cat. 18
- G Ignition system, Clutch 13
- H Engine housing 17
- J Engine housing FS 46 22
- K Air filter, Spacer flange 28
- L Air filter, Spacer flange 2-MIX 16
- M Fuel tank 14
- N Carburetor C1Q-S186A, C1Q-S153, C1Q-S97A 43
- O Carburetor C1Q-S187A, C1Q-S160, C1Q-S143 BR 43
- P Carburetor C1Q-S216, C1Q-S190B 2-MIX 29
- Q Carburetor C1Q-S71 (25.2004) 36
- R Carburetor C1Q-S66 (36.2002) 36
- S Carburetor C1Q-S58A (27.2001) 31
- T Carburetor C1Q-S53A 31
- U Carburetor C1Q-S44A 31
- V FS 38: Drive tube assembly, Loop handle 20
- W FS 45, 46: Drive tube assembly, Loop handle 24
- X Tools, Extras 8
- A Crankcase, Cylinder 23
- B Rewind starter 15
- C Rewind starter ErgoStart/Easy2Start 17
- D Muffler 10
- E Muffler Cat. 18
- F Ignition system, Clutch 11
- G Engine housing (Bike handle) 8
- H Engine housing (Loop handle) 16
- J Air filter, Fuel tank 31
- K Carburetor C1Q-S186A, C1Q-S153, C1Q-S97A 43
- L Carburetor C1Q-S187A, C1Q-S160, C1Q-S143 BR 43
- M Carburetor C1Q-S71 (25.2004) 36
- N Carburetor C1Q-S66 (36.2002) 37
- O Bike handle 26
- P Drive tube assembly, Loop handle 25
- Q Drive tube extension 0.5 m HL-KM 0°, HL-KM 135°, HT-KM, SP-KM 13
- R Drive tube extension 1 m HT-KM 15
- S Carbon Drive tube extension 1 m HT-KM, HL-KM 16
- T Tools, Extras 23
Parts are not
interchangeable across series — check yours before ordering.